Determination of the Fracture Toughness Characteristics of S355JR Steel

• Autorzy: Dzioba I. , Furmańczyk P. , Lipiec S.

Identyfikatory

DOI

10.24425/118967

• Języki publikacji: EN

Abstrakty

EN

The article presents the results of tests carried out on S355JR steel of ferrite-pearlite and ferrite-bainite microstructures. The strength properties and fracture toughness were determined. The critical value of fracture toughness was determined at the moment of crack initiation by measuring of the stretch zone width, and in the moment of reaching a subcritical crack growth of 0.2 mm. Determination of fracture toughness characteristics was carried out in accordance with the procedures of ISO and ASTM standards.

Słowa kluczowe

EN

S355JR steel; strength properties; fracture toughness; stretch zone width

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2018
• Tom: Vol. 63, iss. 1
• Strony: 497--503
• Opis fizyczny: Bibliogr. 17 poz., rys., tab., wzory

Twórcy

autor

Dzioba I.

• Department of Mechanical Design, Faculty of Mechatronics and Mechanical Engineering, Kielce University of Technology, 7 Tysiąclecia P.P. Al., 25-314 Kielce, Poland

autor

Furmańczyk P.

• Department of Metal Science and Manufacturing Processes, Faculty of Mechatronics and Mechanical Engineering, Kielce University of Technology, 7 Tysiąclecia P.P. Al., 25-314, Kielce, Poland

autor

Lipiec S.

• Department of Mechanical Design, Faculty of Mechatronics and Mechanical Engineering, Kielce University of Technology, 7 Tysiąclecia P.P. Al., 25-314 Kielce, Poland

Bibliografia

• [1] J. Zhao, J. H. Lee, Y. W. Kim, Z. Jiang, Ch. S. Lee, Materials Science and Engineering 559, 427-435 (2015).
• [2] B. Ligaj, The influence of selected loading programmers generated from the correlation table on fatigue life of 18G2A steel, Maintenance Problems 3, 129-246 (2007).
• [3] M. Sokolov, A. Salminen, M. Kuznetsov, I. Tsibulskiy, Materials and Design 32, 5127-5131 (2011).
• [4] I. Dzioba, A. Skrzypczyk, Welding Technology Review 78, 32-35 (2006).
• [5] M. Kocak, S. Webster, J. J. Janosch, R. A. Ainsworth, R. Koerc, FITNET Fracture-Fatigue-Creep-Corrosion, 2008.
• [6] T. L. Anderson, Fracture Mechanics: Fundamentals and Applications, 2008.
• [7] ESIS Procedure for Determining the Fracture Behaviour of Materials. ESIS P2-92 (1992). Appendix 4. s. A4.1-A4.6
• [8] PN-EN 10025-2: 2007, Hot Rolled Products Of Structural Steels. Part 2. Technical Delivery Conditions for Non-Alloy Structural Steels (2007).
• [9] ASTM E8, Standard test method for tension testing of metallic materials, ASTM International West Conshohocken, PA (2003).
• [10] ASTM E1820-09, Standard Test Method for Measurement of Fracture Toughness, ASTM International West Conshohocken, PA (2009).
• [11] K. H. Schwalbe, J. D. Landes, J. Heerens, Classical Fracture Mechanics Methods, GKSS 2007/14.2007.
• [12] ISO 12135:2002 Metallic materials – Unified method of test for the determination of quasistatic fracture toughness (2002).
• [13] http:/reudig.de/tmp/messprogramm.htm, accessed: 28.06.2017.
• [14] A. Neimitz, Mechanika Pękania (in Polish) Warszawa PWN 1999.
• [15] H. Kobayashi, H. Nakamura, H. Nakazawa, Evaluation of Blunting Line and Elastic-Plastic Fracture Toughness, ASTM STP 803, 420-438 (1983).
• [16] W. L. Guo, Elastoplastic three dimensional crack border field – III. Fracture parameters, Engineering Fracture Mechanics 51, 51-57 (1995).
• [17] I. Dzioba, P. Furmańczyk, Wyznaczanie krytycznych wartości odporności na pękanie Ji na podstawie pomiaru szerokości strefy stępienia (in Polish), Wybrane problemy w mechatronice i inżynierii materiałowej, 110-123 (2016).

Uwagi

EN

1. The work was performed as part of research projects: 01.0.08.00/2.01.01.01.0008 MNSP.MKPK.16.001; 01.0.06.00/2.01.01.02.0020 MNSC.MKTK.16.004 and 01.0.08.00/2.01.01.02.0021 MNSC.MKPK.16.002

PL

2. Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).