Preparation of ceramic nanofibers of iron vanadate using electrospinning method

• Autorzy: Khaksarfard Yasaman , Ziyadi Hakimeh , Heydari Akbar

Identyfikatory

DOI

10.2478/msp-2019-0070

• Języki publikacji: EN

Abstrakty

EN

Because of special characteristics of vanadate compound, such as its sustainability, magneticity, high selectivity in reactions and catalytic character, this study aimed to preparation and analyzing novel ceramic iron vanadate (FeVO₄) nanofibers. The ceramic nanofibers of iron vanadate were made by the combination of sol-gel and electrospinning methods. First, polyvinyl alcohol (PVA), as a matrix polymer, was mixed separately with ammonium metavanadate (NH₄VO₃) and iron (III) nitrate (Fe(NO₃)₃). As a result, the spinnable polymeric gel was obtained from the controlled mixture of these two precursors of ceramic material. Electrospinning of PVA/iron (III) nitrate/ammonium vanadate solution was done using an Electroris setup that enabled preparation of polymeric template nanofiber. Finally, iron vanadate nanofiber was obtained by calcination of polymer nanofiber at controlled temperature. The products were characterized with scanning electron microscope (SEM), energy dispersive X-ray spectroscope (EDX), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), vibrating sample magnetometer (VSM) and Brunauer-Emmett-Teller (BET) surface area analysis.

Słowa kluczowe

EN

electrospinning; nanofiber; ceramics; iron vanadate

• Wydawca: De Gruyter
• Czasopismo: Materials Science Poland
• Rocznik: 2019
• Tom: Vol. 37, No. 4
• Strony: 645--651
• Opis fizyczny: Bibliogr. 35 poz., rys.

Twórcy

autor

Khaksarfard Yasaman

• Active Pharmaceutical Ingredients Research Center, Tehran Medical Sciences, Islamic Azad University, Tehran, Iran

autor

Ziyadi Hakimeh

• Department of Organic Chemistry, Faculty of Pharmaceutical Chemistry, Tehran Medical Sciences, Islamic Azad University Tehran, Iran

autor

Heydari Akbar

• Chemistry Department, Tarbiat Modares University, Tehran, Iran

Bibliografia

• [1] LIM K., TECK CH., Prog. Polym. Sci., 70 (2017), 1.
• [2] TEO W.E., RAMAKRISHNA S., Nanotechnology, 17 (2006), 79.
• [3] PATIL J.V., MALI S.S., KAMBLE A.S., HONG CH.K., KIM J.H., PATIL P.S., Appl. Surf. Sci., 423 (2017), 641.
• [4] XUE J., XIE J., LIU W., XIA Y., Acc. Chem. Res., 50 (2017), 1976.
• [5] THENMOZHI S., DHARMARAJ N., KADIRVELU K., YONG KIM H., Mater. Sci. Eng. B-Adv., 217 (2017), 36.
• [6] DAI Y., LIU W., FORMO E., SUN Y., XIA Y., Polym. Advan. Technol., 22 (2011), 326.
• [7] ESFAHANI H., JOSE R., RAMAKRISHNA S., Materials, 10 (2017), 1238.
• [8] LI D., XIA Y., Adv. Mater., 16 (2004), 1151.
• [9] MASSAGLIA G., QUAGLIO M., Mat. Sci. Semicon. Proc., 73 (2018), 13.
• [10] LI L., PENG SH., LEE J.K.Y., JI D., SRINIVASAN M., RAMAKRISHNA S., Nano Energy, 39 (2017), 111.
• [11] CHANG Y., ZENG H.CH., Cryst. Growth Des., 4 (2004), 397.
• [12] MARBERGER A., FERRI D., ELSENER M., SAGAR A., KRÖCHER O., Appl. Catal. B-Environ., 218 (2017), 731.
• [13] SANJEEWA L.D., MCMILLEN C.D., WILLETT D., CHUMANOV G., KOLIS J.W., J. Solid State Chem., 236 (2016), 61.
• [14] KALAI S.R., GEDANKEN A., ANILKUMAR P., MANIKANDAN G., KARUNAKARAN C., J. Cluster Sci., 20 (2009), 2991.
• [15] PARHI P., UPRETI SH., RAMANAN A., Cryst. Growth Des., 10 (2010), 5078.
• [16] GOLMOJDEH H., ZANJANCH M.A., J. Electron. Mater., 43 (2014), 528.
• [17] PALACIO L.A., SILVA E.R., CATALAO R., SILVA J.M., HOYOS D.A., RIBEIRO F.R., RIBEIRO M.F., J. Hazard. Mater., 153 (2008), 628.
• [18] REDDY CH.V.S., YEO I.H., IL-MHO S., J. Phys.Chem. Solids, 69 (2008), 1261.
• [19] HUANG L., SHI L., ZHAO X., XU J., LI H., ZHANG J., ZHANG D., CrystEngComm., 16 (2014), 5128.
• [20] GHOLAMZADEH B.M., MOUSAVI S.H., RANGRAZ J.M., J. Mater. Sci-Mater. El., 28 (2017), 1480.
• [21] POIZOTE PH., LAURUELLE S., TOUBOUL M., TARASCON J.-M., C.R. Chim., 6 (2003), 125.
• [22] NITHYA V.D., SELVAN R.K., Mater. Res. Bull., 406 (2011), 24.
• [23] NITHYA V.D., KALAI R.S., SANJEEVIRAJA C., MOHAN R.D., ARUMUGAM S., Mater. Res. Bull., 46 (2011), 1654.
• [24] KANETI Y.V., LIU M., ZHANG X., BU Y., YU Y., Sensor. Actuat. B-Chem., 236 (2016), 173.
• [25] HEYDARI A., SHEYKHAN M., SADEGHI M., RADFAR I., Inorg. Nano-Met. Chem., 47 (2017), 248.
• [26] MA H., YANG X., TAO Z., LIANG J., CHEN J., Cryst Eng Comm., 13 (2011), 897.
• [27] LEE H.S., MO K.J., OH G.S., SOONIM S., Mater. Chem. Phys., 194 (2017), 313.
• [28] LUO L., FEI Y., CHEN K., LI D., QIA H., J. Alloy. Compd., 649 (2015), 1019.
• [29] LUTTA S.T., DONG H., ZAVALIJ P.Y., WHITTINGHAM M.S., Mater. Res. Bull., 40 (2005), 383.
• [30] WANG F., ZHANG H., LIU L., SHIN B., SHAN F.K., J. Alloy. Compd., 672 (2016), 229.
• [31] RENEKER D.H., CHUN I., Nanotechnology, 7 (1996), 216.
• [32] WONGSASULAK S., PATAPEEJUMRUSWONG M., WEISS J., SUPAPHOL P., YOOVIDHYA T., J. Food Eng., 98 (2010), 370.
• [33] COATES J., Interpretation of Infrared Spectra. A Practical Approach Encyclopedia of Analytical Chemistry, John Wiley & Sons Ltd., Chichester, 2000, p. 10815.
• [34] VUK S.A., OREL B., DRAGIC G., J. Solid State Electr., 5 (2001), 437.
• [35] WILLIAMSON J.K., SMALLMAN R.E., Philos. Mag., 1 (1956), 34.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).