Linear positioning errors of 3-axis machine tool

• Autorzy: Józwik J. , Mazurek P. , Wieczorek M. , Czwarnowski M
• Języki publikacji: EN

Abstrakty

EN

This paper presents results of 3-axis CNC machine tool diagnostics performed with XL-80 laser interferometer and XC-80 environmental compensation unit, including pressure, humidity and temperature sensors. Furthermore, the paper includes the methodology and results of conducted measurements of linear positioning errors, which supplied data for further analysis. The conclusion section presents important results of conducted experiments. Measurement results were presented in figures, charts and tables.

Słowa kluczowe

EN

CNC machine tool; diagnostic systems; positioning error

• Wydawca: Polskie Towarzystwo Promocji Wiedzy ; Lublin University of Technology
• Czasopismo: Applied Computer Science
• Rocznik: 2015
• Tom: Vol. 11, no 2
• Strony: 86--94
• Opis fizyczny: Bibliogr. 14 poz., fig., tab.

Twórcy

autor

Józwik J.

• Lublin University of Technology Mechanical Engineering Faculty, Department of Production Engineering, 36 Nadbystrzycka Street, 20-816 Lublin, Poland

autor

Mazurek P.

• The State Higher School of Vocational Education of Szymona Szymonowica in Zamość, Institute of Natural Science and Technology, 22-400 Zamość, 64 Zamoyskiego Street

autor

Wieczorek M.

• The State School of Higher Education in Chełm, Institute of Technical Sciences and Aviation, Department of Mechanical Engineering, 54 Pocztowa Street, 22-100 Chełm, 55 Depułtycze Królewskie

autor

Czwarnowski M

• The State School of Higher Education in Chełm, Institute of Technical Sciences and Aviation, Department of Mechanical Engineering, 54 Pocztowa Street, 22-100 Chełm, 55 Depułtycze Królewskie

Bibliografia

• [1] Castroa H. F. F., Burdekinb M.: Calibration system based on a laser interferometer for kinematic accuracy assessment on machine tools. Inter. Journal of Machine Tools & Manufacture, 46, 2006, pp. 89–97.
• [2] Honczarenko J., Kwasniewicz J.: New measurement systems for verifying the accuracy of CNC machine tools (in Polish). Mechanik, 12, 2008, pp. 1012–1016.
• [3] Chen J. S., Kou T. W., Chiou S. H.: Geometric Error Calibration of Multi-axis Machines using an Auto-alignment Laser Interferometer. J. of the Intern. Societies for Precision Engineering and Nanotechnology, 23, 1999, pp. 243–252.
• [4] Iwasawa K., Iwama A., Mitsui K.: Development of a Measuring Method for Several Types of Programmed Tool Paths for NC Machine Tools using a Laser Displacement Interferometer and a Rotary Encoder. Precision Engineering, 28, 2004, pp. 399–408.
• [5] Józwik J., Kuric I. Saga M., Lonkwic P.: Diagnostics of CNC Machine Tools in Manufacturing Process with Laser Interferometer Technology. Manufacturing Technology, vol. 14, no. 1, 2014, pp. 23–30.
• [6] Józwik J., Kuric I., Semotiuk L.: Laser Interferometer Diagnostics of CNC Machine Tools. Communications, 3A/2014.
• [7] Józwik J., Kuric I.: Non-contact diagnostic systems of CNC machine tools (in Polish). 14th Intern. Conference Automation in Production Planning and Manufacturing, Zilina, 2013.
• [8] Majda P.: Relation between kinematic straightness errors and angular errors of machine tool, Advances in Manufacturing Science and Technology, vol. 36, no. 1, 2012, pp. 47–53.
• [9] Majda P.: The influence of geometric errors compensation of a CNC machine tool on the accuracy of movement with circular interpolation. Advances in Manufacturing Science and Technology, vol. 36, no. 2, 2012, pp. 59–67.
• [10] Majda P.: Pomiary i Kompensacja błędów geometrycznych obrabiarek CNC. Inżynieria Maszyn, 1–2, pp. 126–134, 2011.
• [11] Nakazawa H., Ito K.: Measurement system of contouring accuracy on NC Machine Tools. Bull. Japan Soc. Prec. Eng.; 12, 1978, 4: 189.
• [12] Schwenke H., Knapp W., Haitjema H., Weckenmann A., Schmitte R., Delbressine F.: Geometric error measurement and compensation of machines – An update, CIRP Annals – Manufacturing Technology, vol. 57, 2, 2008, pp. 660–675.
• [13] Turek P., Kwaśny W., Jędrzejwski J.: Zaawansowane metody identyfikacji błędów obrabiarek. Inżynieria Maszyn, 13, 1/2, 2010, pp. 7–36.
• [14] Banaś A., Wilde K.: Vibration diagnostics of footbridge with use of rotation sensor. Applied Computer Science, 10, 4, 2014, pp. 38–49.