Tytuł artykułu
Autorzy
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Researchers are constantly looking for the use of new and effective types of natural dyes to reduce the impact of harmful factors from the use of synthetic dyes. In this study, the effects of a natural plant extract based on oak bark, used as a dye during the finishing process, on the physico-mechanical and hygroscopic properties of the leather were studied. Extraction was carried out by the traditional method without chemical additives using only distilled water and oak bark. The application of finishing solutions based on a standard chemical pigment and oak bark extract was carried out using an automatic rotary spray machine in combination with a drying tunnel. The physico-mechanical properties of colored leathers based on oak bark extract were determined in comparison with a standard chemical pigment and with a sample without finishing. The hygroscopicity of the leather samples were also evaluated, such as: water absorption, water penetration and color fastness to water spotting. The results of the conducted studies have shown that the samples stained with a natural dye have good physico-mechanical and water resistance properties.
Czasopismo
Rocznik
Tom
Strony
83--89
Opis fizyczny
Bibliogr. 28 poz., rys., tab.
Twórcy
autor
- M. Auezov South Kazakhstan University, Higher School of Textile and Food Engineering, Department of Technology and Design of Light Industry Products, Shymkent, Kazakhstan
autor
- Ege University, Faculty of Engineering, Department of Leather Engineering 5100, Bornova-Izmir, Turkey
autor
- M. Kh. Dulaty Taraz Regional University, Tole bi str. 60, 080000 Taraz, Kazakhstan
autor
- M. Auezov South Kazakhstan University, Higher School of Textile and Food Engineering, Department of Technology and Design of Light Industry Products, Shymkent, Kazakhstan
autor
- M. Kh. Dulaty Taraz Regional University, Tole bi str. 60, 080000 Taraz, Kazakhstan
autor
- Jizzakh Polytechnic Institute, 4 Islam Karimov, 130100 Jizzakh, Uzbekıstan
autor
- M. Auezov South Kazakhstan University, Higher School of Textile and Food Engineering, Department of Technology and Design of Light Industry Products, Shymkent, Kazakhstan
Bibliografia
- 1. Kudabayeva A, Abzalbekuly B. Assessment of the influence of glove and haberdashery skin production technology on the environment. Leather and Footwear Journal. 2021; 21: 27-34.
- 2. Liu, C.K., Latona, N.P., Ashby, R., Ding, K., Environmental effects on chrome–free leather J Am Leather Chem As, 2006, 101, 368–75.
- 3. Joseph, K., Nithya, N., J Material flows in the life cycle of leather Journal of Cleaner Production, 2009, 17, 676–682, https://doi.org/10.1016/j. jclepro.2008
- 4. Nalanya K.M., Rop R.K., Onyuka A., Birech Z., Sasia A., Effect of crusting operations on the physical properties of leather. Leather and Footwear Journal, 2018, 4, 283-294
- 5. Urbanija, V., Gersak, J., Impact of the mechanical properties of nappa clothing leather on the characteristics of its use, J Soc Leath Tech Ch, 2004, 88, 181-190.
- 6. Nalyanya, K.M., Rop, R.K., Onyuka, A., Migunde, P.O., Ngumbu, R.G., Influence of radiation on the viscoelastic properties and dynamic viscosity of bovine hide using dynamic mechanical analysis, Journal of Thermal Analysis Calorimetry, 2016a, 123, 1, 363-370, https://doi.org/10.1007/s10973-015-4851-2
- 7. Musa A.E., Gasmelseed G.A., Development of Eco-friendly Combination Tanning System for the Manufacture of Upper Leathers, International Journal of Advanced Industrial Engineering, 2013, 1, 1, 9-15
- 8. Kowalska M., Zbikowska A. pH as a Parameter for the Exponential Stability of Fatliquor Emulsions. Journal- Society of Leather Technologists and Chemists, 2014, 98, 23-29.
- 9. Mohamed, O. A., Moustafa, A. B., Mehawed, M. A. et al., Styrene and butyl methacrylate copolymers and their application in leather finishing. J. Appl. Polym. Sci., 2009, 111(3), 1488-1495.
- 10. BASF, Pocket Book for the Leather Technologist, 4th edition, (2007), Germany.
- 11. Rajeckas, V., Leather coatings – Coating Technology Handbook, (2006), 100-107.
- 12. Sarkar, K. T., Retanning, dyeing and finishing of Leather. Shoe Trade Publishing, (1996), New York.
- 13. Nalbat, S.; Onem, E.; Basaran, B.: Yorgancioglu, A., Yilmaz, O. Effect of Finishing Density on the Mechanical Properties of Leather, 2016, https://hdl.handle.net/11454/52992
- 14. Emiliana Kasmudjiastuti, Rihastiwi Setiya Murti, The effects of finish type on permeability and organoleptic properties of python (Python reticulatus) skin finished leather, Majalah Kulit, Karet dan Plastik, 33(1), 19-28, 2017, DOI: 10.20543/MKKP.V33I1.1575
- 15. Bayramoğlu E.E., Unique Biocide for the Leather Industry: Essential Oil of Oregano. Journal of the American Leather Chemists Association (JALCA).2007; 102(11): 347-353.
- 16. Bayramoğlu E.E, Gülümser G., and Karaboz İ. Ecological and Innovative Fungicide for Leather Industry: Essential Oil of Origanum minuti florum. Journal of the American Leather Chemists Association (JALCA). 2006; 101(3): 96-104.
- 17. Çolak S., Bayramoğlu E.E, Uluç D., Determining the Usability of Photo sensitizers as Biocidesin Soaking Process. Journal of the American Leather Chemists Association (JALCA). 2006;101(2): 66-72,2006.
- 18. Bayramoğlu E.E., Antibacterial Activity of Myrtus communis Essential Oil Used in Soaking, JSLTC. 2006; 90: 5
- 19. Bayramoğlu E.E, Gülümser G., Karaboz İ. The Investigation of Antibacterial Activities of Some Essential Oilsin Wet Blue Leather. IJNES, 2008; 2(1): 33-36.
- 20. Bayramoğlu E.E., Hidden Treasure of the Nature: Pas, The Effects of Grape Seeds on Free Formaldehyde of Leather. Industrial Crops and Products. 2013; 41: 53-56.
- 21. Deveoglu O., Karadag R., A Review on the Flavonoids – A Dye Source. Int. J. Adv. Eng. Pure Sci. 2019; 3: 188-200.
- 22. O. Deveoglu, E. Torgan, R. Karadag, Identification of Dyestuffs in the Natural Pigments Produced with Al3+, Fe2+ and Sn2+ Mordant Metals from Cochineal (Dactylopius coccus Costa) and Walloon oak (Quercus ithaburensis Decaisne) by HPLC-DAD. Asian Journal of Chemistry. 2010; 22 (9); 7021-7030.
- 23. Bielak E., Marcinkowska E. Mechanical Properties of Lining Leathers Finished with the Addition of Oregano Essential Oil. ISSN 1898-6447, Zesz. Nauk. UEK, 2017; 7 (967): 19–31 DOI: 10.15678/ZNUEK.2017.0967.0702
- 24. Mirzamuratova R.Sh, Kaldybayev R.T, Bayramoğlu E.E, Temirshikov K.M, Baiseitova I.S. The Effect of Natural Extracts on the Strength of Leather. Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya Tekstil’noi Promyshlennosti. 2023; 406(4): 61-65.
- 25. Mirzamuratova R., Bayramoğlu E.E., Kaldybayev R., Application of some plant extracts as biocolourants for leather during finishing process. Journal of American Leather Chemists Association. 2024; 119(1): DOI: https://doi.org/10.34314/jalca.v119i1.8289
- 26. Mukhopadhyay, A., Ghosh, S. and Bhaumik, S., Tearing and tensile strength behaviour of military khaki fabrics from grey to finished process. Int. J.Cloth. Sci. Tech., 2006; 18(3-4), 247-264.
- 27. Niyozov A.K., Amonov M.R. Study of the functional properties of leather for shoe bottoms. Plastic masses. No1-2, 2016 (In Russian).
- 28. Nalyanya K.M., Rop R.K., Onyuka, A., Kamau, J., Tensile Properties of Indigenous Kenyan Boran Pickled and Tanned Bovine Hide, Int J Sci Res, 2015; 4(3), 2149-2154.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-87fe785d-f329-423f-8543-f74c16cbb8c7