Environmental Profile Assessment of Passenger Car Components

• Autorzy: Majerník Milan , Daneshjo Naqib , Malega Peter , Kóňa Jakub , Barilová Barbara

Identyfikatory

DOI

10.12912/27197050/143014

• Języki publikacji: EN

Abstrakty

EN

A comprehensive, high-quality product offered in the network of automotive suppliers must meet increasingly stringent environmental criteria and standards. The assessment of the environmental quality of a product must cover all stages of its life cycle, from "cradle to cradle", and must result in an improvement in the producer’s environmental performance. The paper identified, analysed and evaluated the environmental aspects, impacts and risks of individual phases of the production components life cycle of a passenger car, bumper, fender, and door. In the evaluation phase, progressive environmental management tools, LCA and the eco-indicator method were used in the case studies. Their combination for individual components created a methodological procedure that can be used to evaluate the environmental profile of other components of cars and other products in general.

Słowa kluczowe

EN

environmental profile; life cycle; car component; environmental aspect; eco-indicator; impact assessment; LCA method

• Wydawca: Lubelski Oddział Polskiego Towarzystwo Inżynierii Ekologicznej ; Lublin University of Technology ; WNGB Wydawnictwo Naukowe
• Czasopismo: Ecological Engineering & Environmental Technology
• Rocznik: 2022
• Tom: Vol. 23, iss. 1
• Strony: 76--87
• Opis fizyczny: Bibliogr. 13 poz., rys., tab.

Twórcy

autor

Majerník Milan

• Faculty of Commerce, University of Economics in Bratislava, Slovakia

• https://orcid.org/0000-0002-4421-2801

autor

Daneshjo Naqib

• Faculty of Commerce, University of Economics in Bratislava, Slovakia

• https://orcid.org/0000-0003-3357-6738

autor

Malega Peter

• Faculty of Mechanical Engineering, Technical University of Kosice, Slovakia

• https://orcid.org/0000-0001-6354-5364

autor

Kóňa Jakub

• Faculty of Commerce, University of Economics in Bratislava, Slovakia

• https://orcid.org/0000-0002-8000-6773

autor

Barilová Barbara

• Faculty of Commerce, University of Economics in Bratislava, Slovakia

• https://orcid.org/0000-0001-9408-5962

Bibliografia

• 1. Badida M., Majerník M., Šebo D., Hodolič J. 2011. Strojárska výroba a životné prostredie. SjF TU, Vienala, Košice, 201.
• 2. Bareš R.A. 1988. Kompozitní materiály, Státní nakladatelství technické literatury Praha, 328.
• 3. Caluwe N. 1997. Ecotools manual – A comprehensive review of Design for Environment tools. MMU. Manchester, 72.
• 4. Enviromagazín. 2008. Článok: Environmentálne technológie a ekologické inovácie ponúkajú riešenie príležitosti, 1, 16–17.
• 5. Fedra K. 1990. Interactive Environmental Software: Integration, Simulation and Visualisation. International Institute for Apllied Systems Analysis, Luxenburg.
• 6. Geodkop M., Spriensma R. 2001. The Eco. Indicator 99 – A damage oriented method for LCIA. Pré Consultants, Amersfoot, 132.
• 7. Introduction to DfE, Part. I. and Part II. In: Workshop on DfE toolkit., Univ. of California, Berkeley, 2001.
• 8. Majerník M., Badida M., Legáth J. 2002. Systémy environmentálneho manažérstva. Košice: Vienala, 291.
• 9. Muránsky J., Badida M. 2001. Sustainable development and its mathematical model for the automotive industry – Acta Mechanica Slovaca, 1, 37–42.
• 10. Muránsky J. & Badida M. 2001. Trvalo udržateľný rozvoj a v strojárstve. Vienala, Košice, 251.
• 11. Stevels A. 1998. Lecture of Ecodesign; The four of design for environment. Industrial Design Engineering, TU Delft (NL).
• 12. Yarwood J., Eagan P. 1999. Design for Environment Toolkit. Minnesota Office of EA, Madison, 70.
• 13. STN EN ISO 14 043. Environmentálne manažérstvo. Posudzovanie životného cyklu. SÚTN, Bratislava 2003.