Analysis of the temperature distribution in an insulated reinforced-concrete building envelope using FBG sensors

• Autorzy: Satława Anna , Juraszek Janusz

Identyfikatory

DOI

10.17512/bozpe.2024.13.21

• Języki publikacji: EN

Abstrakty

EN

The progressive climate change caused by anthropological factors has led EU member states to set themselves a very ambitious goal of achieving climate neutrality by 2050. Within the Fit for 55 packages and regulations, a CO2 emissions system (EU ETS) has already been in place since 2005, affecting energy-intensive industries, energy producers and airlines. It is planned that from 2027 the ETS2 system will apply, which will cover CO2 emissions from burning fuels in buildings and road transport. The ETS2 means that gas, coal and fuel oil, i.e. fossil fuels used to heat households, will be subject to taxation. The most effective way to reduce the consumption of these fuels is to reduce the energy intensity of buildings. This can be achieved using appropriate thermal insulation of building envelopes/partitions. Knowledge of the temperature distribution inside a partition can significantly improve the process of thermo-modernization in existing buildings. The paper presents the method and results of the measurement of the thermal distribution inside a reinforced-concrete building wall using FBG sensors.

Słowa kluczowe

EN

FBG temperature sensor; temperature distribution; thermomodernization

PL

czujniki temperatury; rozkład temperatury; termomodernizacja

• Wydawca: Wydawnictwo Politechniki Częstochowskiej
• Czasopismo: Budownictwo o Zoptymalizowanym Potencjale Energetycznym
• Rocznik: 2024
• Tom: Vol. 13
• Strony: 210--217
• Opis fizyczny: Bibliogr. 18 poz., rys.

Twórcy

autor

Satława Anna

• University of Bielsko-Biala, Poland

• https://orcid.org/0009-0001-9627-9063

autor

Juraszek Janusz

• University of Bielsko-Biala, Poland

• https://orcid.org/0000-0003-3771-2776

Bibliografia

• 1. Ahola, S. & Lahdensivu, J. (2017) Long term monitoring of repaired external wall assembly. Proceedings of the 11th Nordic Symposium on Building Physics (NSB2017), Trondheim, Norway, 11-14 June 2017.
• 2. Antonik-Popiołek, P. (2021) Influence of solar radiation to the temperature inside a three-layer partition in winter season. Acta Sci. Pol. Architectura, 20(2), 75-82. DOI: 10.22630/ASPA.2021.20.2.16.
• 3. Bao, X.Y. & Liang, C. (2012) Recent progress in distributed fiber optic sensors. Sensors, 12, 8601-8639.
• 4. Bhaskar, Ch., Pal, S. & Kumar Pattnaik P. (2021) Recent advancements in fiber Bragg gratings based temperature and strain measurement. Results in Optics, 5(5), 100130.
• 5. Juraszek, J. (2022) Fiber optic system based on FBG sensors for monitoring modern structures. Archives of Civil Engineering, 68, 2, 445-460.
• 6. Juraszek, J. & Antonik-Popiołek, P. (2021) Światłowodowe czujniki FBG do monitorowania temperatury przegród budowlanych [FBG sensors for the monitoring of the temperature of building partitions]. Materials, 14(5), 1207.
• 7. Juraszek, J. (2020) Fiber Bragg sensors on strain analysis of power transmission lines. Materials, 13, 1559.
• 8. Juraszek, J. (2018) Hoisting machine brake linkage strain. Arch. Min. Sci., 63, 583-597.
• 9. Kersey, A.D. (1996) Review of recent developments in fiber optic sensor technology. Opt. Fiber Technol., 2, 291-317
• 10. Liao, W., Zhuang, Y., Zeng, C., Deng, W., Huang, J. & Ma, H. (2020) Fiber optic sensors enabled monitoring of thermal curling of concrete pavement slab: Temperature, strain and inclination. Measurement, 165, 108203.
• 11. Loizos, A., Plati, C. & Papavasiliou, V. (2013) Fiber optic sensors for assessing strains in cold in-place recycled pavements. Int. J. Pavement Eng., 14, 125-133.
• 12. Marino, B.M., Muñoz, N. & Thomas, L.P. (2018) Calculation of the external surface temperature of a multi-layer wall considering solar radiation effects. Energy Build., 174, 452-463.
• 13. Minardo, A., Bernini, R. & Zeni, L. (2014) Distributed temperature sensing in polymer optical fiber by BOFDA. IEEE Photonics Technol. Lett., 26, 387-390.
• 14. Othonos, A. & Kyriacos, K. (1999) Fiber Bragg Gratings: Fundamentals and Applications in Telecommunications and Sensing. Norwood, Artech House, ISBN 089006-344-3.
• 15. PN-EN ISO 12524:2003 Building materials and products. Hygrothermal properties. Tabulated design values.
• 16. PN-EN ISO 6946:2008 Building components and building elements. Thermal resistance and thermal transmittance. Calculation method.
• 17. Wang, J., Tang, J. & Chang, H. (2006) Fiber Bragg grating sensors for use in pavement structural strain- -temperature monitoring. Proceedings of the SPIE 6174, Smart Structures and Materials 2006: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, San Diego, CA, USA, 27-28 February 2006.
• 18. Weng, X., Zhu, H.-H., Chen, J., Liang, D., Shi, B. & Zhang, C.-C. (2014) Experimental investigation of pavement behavior after embankment widening using a fiber optic sensor network. Struct. Health Monit. Int. J., 14, 46-56.