Numerical Simulations of the Thread Rolling Process as Ecological and Economical Research Tool in the Implementation of Modern Technologies

Kukiełka, K.

Artykuł - szczegóły

Tytuł artykułu

Numerical Simulations of the Thread Rolling Process as Ecological and Economical Research Tool in the Implementation of Modern Technologies

Autorzy

Kukiełka K.

Treść / Zawartość

Pełne teksty:

Pobierz

Identyfikatory

Warianty tytułu

Symulacje numeryczne procesu walcowania gwintów jako ekologiczne i ekonomiczne narzędzie badawcze w procesie wdrażania nowoczesnych technologii

Języki publikacji

Abstrakty

In the this paper the solutions of discrete equations of the heat transfer of the object in the thread rolling process with applied explicit and implicit integrations methods, were shown. Examples of simulations of the rolling process in ANSYS programs are presented. Also the temperature distributions for various value of rolling velocity were shown.

W pracy przedstawiono sposób rozwiązywania dyskretnego równania ruchu ciepła w obiekcie podczas procesu walcowania gwintów przy wykorzystaniu metod jawnego i niejawnego całkowania. Zamieszczono przykładowe wyniki analiz numerycznych dla procesu walcowania gwintów w programie ANSYS. Pokazano również rozkłady temperatur dla różnych wartości prędkości walcowania.

Słowa kluczowe

thread rolling eco modelling ecological technological process variational formulation Finite Element Method

walcowanie gwintów eko-modelowanie ekologiczne procesy technologiczne sformułowanie wariacyjne metoda elementów skończonych

Wydawca

Politechnika Koszalińska

Czasopismo

Rocznik Ochrona Środowiska

Rocznik

2017

Tom

Tom 19

Strony

161--180

Opis fizyczny

Bibliogr. 44 poz., rys.

Twórcy

autor

Kukiełka K.

Politechnika Koszalińska

Bibliografia

1. Domblesk, J.P., Feng, F. (2002). Two-dimensional and three-dimensional finite element models of external thread rolling. Professional Engineering Publishing, 216(4), 507-517.
2. Jednovicky, B., Streit, J. (1998). Cold volume treatment in market economy conditions. Scientific-Technical Conference on Modern Cold Plastic Metalforming Technologies, Poznań- Kiekierz, 147-151. (in Polish).
3. Kaldunski, P., Kukielka, L., (2014). Numerical Analysis and Simulation of Drawpiece Forming Process by Finite Element Method, Mechanics and Materials “Novel Trends in Production Devices and Systems”, 474, 153-158.
4. Kowalik, M., Rucki, M., Paszta, P., Gołębski, R. (2016). Plastic deformations of measured object surface in contact with undeformable surface of measuring tool. Measurement Science Review. 16(5), 254-259.
5. Kukiełka, K. (2009). Modelling and numerical analysis of the states of deformations and stresses in the surface layer of the trapezoidal and round threads rolled on cold. PhD Thesis, Koszalin University of Technology. (in Polish).
6. Kukiełka, K., Kukiełka, L. (2013). External thread rolling head. The polish patent No PL402652–A1, PL220175–B1, 4.02.2013. (in Polish).
7. Kukiełka, K. (2014). Effective numerical model to analyze the trapezoidal thread rolling process with finite element method. Mechanik, 11, 156-167. (in Polish).
8. Kukielka, K., Kukielka, L., Bohdal, L., Kulakowska, A., Malag, L., Patyk, R. (2014). 3D Numerical Analysis the State of Elastic/Visco–Plastic Strain in the External Round Thread Rolled on Cold. Applied Mechanics and Materials „Novel Trends in Production Devices and Systems”, 474, 436-441.
9. Kukielka, K. (2016). Ecological Aspects of the Implementation of New Technologies Processing for Machinery Parts. Rocznik Ochrona Środowiska (Annual Set of Environment Protection), 18, 137-157.
10. Kukielka, K. (2017). Ecological and economical aspects of modern modeling of thread rolling process. Rocznik Ochrona Środowiska (Annual Set of Environment Protection), 19.
11. Kukiełka, L. (1994). Theoretical and experimental foundations of surface roller burnishing with the electrocontact heating. Book WM nr 47. WSI Koszalin. (in Polish)
12. Kukielka, L. (1999). Application of the variational and finite element methods to dynamic incremental nonlinear analysis in the burnishing rolling operation. ESM'99 - Modelling And Simulation A Tool For The Next Millennium, Vol. II, 221-225.
13. Kukielka, L., Krzyzynski T. (2000). New thermo-elastic thermo-visco-plastic material model and its application. Zeitschrift Fur Angewandte Mathematik Und Mechanik, Vol. 80, supplement: 3, S595-S596.
14. Kukielka, L. (2001). Mathematical modelling and numerical simulation of nonlinear deformation of the asperity in the burnishing cold rolling operation. Computational Methods in Contact Mechanics V, Book Series: Computational and Experimental Methods, 5, 317-326.
15. Kukiełka, L. (2002). Bases of engineering research. PWN, Warsaw. (in Polish).
16. Kukielka, L., Kustra, J., Kukielka, K. (2005). Numerical analysis of states of strain and stress of material during machining with a single abrasive grain. Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VII, Southampton–Boston, WITPRESS, 57-66.
17. Kukielka, L., Kukielka, K. (2006). Numerical analysis of the process of trapezoidal thread rolling. High Performance Structures and Materials III,. Southampton–Boston, WITPRESS, 663-672.
18. Kukielka, L., Kukielka, K. (2007). Numerical analysis of the physical phenomena in the working zone in the rolling process of the round thread. Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VIII, Southampton–Boston, WITPRESS, 125-124.
19. Kukiełka, L. (2010). New damping of models of metallic materials and its application in non–linear dynamical cold processes of metal forming. The 13th International Conference Metal Forming 2010, Steel Research International, Toyohashi, 81, 1482-1485.
20. Kukielka, L., Geleta, K., Kukielka, K. (2012). Modelling and Analysis of Nonlinear Physical Phenomena in the Burnishing Rolling Operation with Electrical Current. Steel Research International, Special Edition: 14th International Conference Metal Forming, Kraków, 1379-1382.
21. Kukielka, L., Geleta, K., Kukielka, K. (2012). Modelling of Initial and Boundary Problems with Geometrical and Physical Nonlinearity and its Application in Burnishing Processes. Steel Research International, Special Edition: 14th International Conference Metal Forming, Krakow, 1375-1378.
22. Kukiełka, L., Kukiełka, K. (2012). The modern method of modeling and analysis precision machining processes auto parts. Environmental aspects of the use of new technologies in transport, Book of Mechanical Engineering, No 235 of Mechanical Faculty, Koszalin University of Technology. Koszalin, 109-128 (in Polish)
23. Kukiełka, L., Bohdal, Ł., Chodór, J., Forysiewicz, M., Geleta, K., Kałduński P., Kukiełka, K., Patyk, R., Szyc, M. (2012). Numerical analysis of selected processes precision machining of automotive parts. Environmental aspects of the use of new technologies in transport, Book of Mechanical Engineering No 235 of Mechanical Faculty, Koszalin University of Technology, Koszalin, 129-194.
24. Kukielka, L., Kukielka, K., Kulakowska, A., Patyk, R., Malag, L., Bohdal, L. (2014). Incremental Modelling and Numerical Solution of the Contact Problem between Movable Elastic and Elastic/Visco–Plastic Bodies and Application in the Technological Processes. Applied Mechanics and Materials “Novel Trends in Production Devices and Systems”, 474, 159-165.
25. Kukiełka, L., Kukiełka, K. (2015). Modelling and analysis of the technological processes using finite element method. Mechanik, 88, 317-340.
26. Kukielka, L., Szczesniak, M., Patyk, R., Kulakowska, A., Kukielka, K., Patyk S., Gotowala, K., Kozak, D. (2016). Analysis of the states of deformation and stress in the surface layer of the product after the burnishing cold rolling operation. Novel Trends in Production Devices and Systems "Materials Science Forum".
27. Kulakowska, A., Patyk, R., Kukielka, L. (2009). Numerical analysis and experimental researches of burnishing rolling process of workpieces with real surface. WMSCI 2009 – The 13th World Multi–Conference on Systemics, Cybernetics and Informatics, Jointly with the 15th International Conference on Information Systems Analysis and Synthesis, ISAS, 2, 63-68.
28. Kulakowska, A., Kukielka, L., Kukielka, K., Malag, L., Patyk, R., Bohdal, L. (2014). Possibility of steering of product surface layers properties in burnishing rolling process. Applied Mechanics and Materials “Novel Trends in Production Devices and Systems”, 474, 442-447.
29. Kusnerova, M., Valicek, J., Harnicarova, M., Hryniewicz, T., Rokosz, K., Palkova, Z., Vaclavik, V., Repka, M., Bendova, M. (2013). A Proposal for Simplifying the Method of Evaluation of Uncertainties in Measurement Results. Measurement Science Review, 13(1), 1-6.
30. Łyczko, K. (2010). External thread rolling technology. WNT, Warszawa. (in polish).
31. Malag, L., Kukielka, L., Kukielka, K., Kulakowska, A., Patyk, R., Bohdal, L. (2014). Problems Determining of the Mechanical Properties of Metallic Materials from the Tensile Test in the Aspect of Numerical Calculations ofthe Technological Processes. Applied Mechanics and Materials “Novel Trends in Production Devices and Systems”, 474, 454-459.
32. Nadolny, K., Plichta, J., Sutowski, P. (2014). Regeneration of grinding wheel active surface using high-pressure hydro-jet. Journal Of Central South University, 21(8), 3107-3118.
33. Olszak, W. (2008). Machining. WNT, Warszawa. (in polish)
34. Patyk, R., Kukielka, L. (2008). Optimization of geometrical parameters of regular triangular asperities of surface put to smooth burnishing. The 12th International Conference Metal Forming 2008, Steel Research International, Kraków, 2, 642-647.
35. Patyk, R. (2010). Theoretical and experimental basis of regular asperities about triangular outline embossing technology. The 13th International Conference Metal Forming 2010, Steel Research International, Toyohashi, 81, 190-193.
36. Patyk, R., Kukielka, L., Kukielka, K., Kulakowska, A., Malag, L., Bohdal, L. (2014). Numerical Study of the Influence of Surface Regular Asperities Prepared in Previous Treatment by Embossing Process on the Object Surface Layer State after Burnishing. Applied Mechanics and Materials “Novel Trends in Production Devices and Systems”, 474, 448-453.
37. Perec, A. (2016). Abrasive suspension water jet cutting optimization using orthogonal array design. International Conference on Manufacturing Engineering and Materials, ICMEM 2016,6-10 June 2016, Nový Smokovec. Procedia Engineering, 149, 366-373.
38. Perec, A., Pude, F., Stirnimann, J., Wegener, K. (2015). Feasibility study on the use of fractal analysis for evaluating the surface quality generated by waterjet. Tehnički vjesnik, 22, 4, 879-883.
39. Rokosz, K., Hryniewicz, T. (2016). XPS Analysis of nanolayers obtained on AISI 316L SS after Magnetoelectropolishing. World Scientific News, 37, 232-248.
40. Skoczylas, A., Zaleski, K. (2015). Effect of Plasma Cutting Parameters upon Shapes of Bearing Curve of C45 Steel Surface. Advances in Science and Technology Research Journal, 9(27), 78-82.
41. Staniszewski, B. (1980). Heat transfer. PWN, Warsaw.
42. Sutowski, P., Nadolny, K. (2016). The identification of abrasive grains in the decohesion process by acoustic emission signal patterns. International Journal Of Advanced Manufacturing Technology, 87(1-4), 437-450.
43. Valicek, J., Drzik, M., Hryniewicz, T., Harnicarova M., Rokosz K, Kusnerova M., Barcova K., Brazina D. (2012). Non-Contact Method for Surface Roughness Measurement After. Machining. Measurement Science Review, 12(5), 184-188.
44. Zaleski, K., Bławucki, S. (2015). Evaluation of the Effectiveness of the Shot Peening Process for Thin-Walled Parts Based on the Diameter of Impression Produced by the Impact of Shot Media. Advances in Science and Technology Research Journal, 9(26), 77-8

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-8797fd20-337b-41c5-a603-28a9dc9dd7a0