The use of reverse engineering to create FEM model of spiroid gears

• Autorzy: Sikorska-Czupryna Sylwia , Mazurkow Aleksander

Identyfikatory

DOI

10.2478/amst-2019-0013

• Języki publikacji: EN

Abstrakty

EN

This paper describes the process of creating a digital model of spiroid gears used in the defense industry. This is where the precise measurement of the parts with the highest requirements for accuracy is of great importance. The construction of a computational model of a physical object was carried out using an optical three-dimensional scanner. Based on the cloud of points obtained in the process of scanning, a spatial digital model reflecting the geometry of an existing element was developed. Polygonization and mesh reconstruction allowed to create a finite element method model that enabled the precise reproduction of the scanned object. The created model was subsequently used to conduct appropriate analysis and simulation to verify the correctness and possible modification of the construction of both elements of spiroid gears: worm thread and face gear

Słowa kluczowe

EN

reverse engineering; 3D scanning; point cloud; spiroid gear; FEM

PL

inżynieria odwrotna; skanowanie 3D; chmura punktów; przekładnia spiroidalna; MES

• Wydawca: Komitet Budowy Maszyn PAN ; De Gruyter
• Czasopismo: Advances in Manufacturing Science and Technology
• Rocznik: 2020
• Tom: Vol. 44, nr 3
• Strony: 71--73
• Opis fizyczny: Bibliogr. 4 poz., rys.

Twórcy

autor

Sikorska-Czupryna Sylwia

• Faculty of Mechanical Engineering and Technology, Rzeszow University of Technology, Kwiatkowskiego 4, 37-450 Stalowa Wola, Poland

autor

Mazurkow Aleksander

• Faculty of Mechanical Engineering and Technology, Rzeszow University of Technology, Kwiatkowskiego 4, 37-450 Stalowa Wola, Poland

Bibliografia

• [1] R. Bénière, et al.: A comprehensive process of reverse engineering from 3D meshes to CAD models. Comput.-Aided Des., 45(2013), 1382-1393.
• [2] Scanning with ATOS – Basic, V7.5 SR1 Manual. GON mbH, Germany.
• [3] J.M. Park, et al.: Surface reconstruction from FE mesh model. J. Comput. Des. Eng., 6(2019)2, 197-208.
• [4] S. Gauthier, et al.: Analysis of digitized 3D mesh curvature histograms for reverse engineering. Comp. Ind. Elsevier, 92-93(2017), 67-83.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).