Application of unconventional materials on primary structural parts of machine tools

• Autorzy: Smolik J. , Kulisek V.
• Języki publikacji: EN

Abstrakty

EN

The paper is mainly focused on possible domains of application of composite sandwich materials in the field of machine tools. A theoretical case study analyzing the effect of application of composite sandwich materials on the dynamics of the X-feed-drive axis of the horizontal milling machine is presented. The benefits of composite sandwich materials are discussed and summarized in the context of modern machine tools and their desired static and dynamic properties. Experimental case study is also presented.

Słowa kluczowe

EN

structural parts of machine tools; machine tools lightweight design; layered composite materials; machine tool design; feed drive complex model

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2009
• Tom: Vol. 9, No. 2
• Strony: 93--105
• Opis fizyczny: Bibliogr. 10 poz. rys.

Twórcy

autor

Smolik J.

• Research Center for Manufacturing Technology, CTU in Prague, Horska 3, 128 00 Prague 2, Czech Republic

autor

Kulisek V.

• Research Center for Manufacturing Technology, CTU in Prague, Horska 3, 128 00 Prague 2, Czech Republic

Bibliografia

• 1. BERTHELOT J. M., 1999, Composite Materials, Mechanical Behaviour and Structural Analysis, Springer.
• 2. TSAI S. W., 1992, Theory of Composites Design, Think Composites, Dayton
• 3. MATTHEWS F. L., DA VIES G. A. O., 2000, HITCHINGS D., SOUTIS C.: Finite Element of Composite Materials and Structures, CRC Press, USA.
• 4. LEE D. G., 2004, Design and manufacture of composite high speed machine tool structures. Composites Science and technology, Elsevier.
• 5. SUH J. D., 2001, Damping characteristics of composite hybrid spindle covers for high speed machine tools. Materials Processing Technology, Elsevier
• 6. SMOLÎK J., 2007, Primary structural parts of machine tools made from unconventional materials. Doctoral Thesis, CTU of Prague, Prague.
• 7. VRB A P., 2009, Horizontal machine center stand with light-weighted structure. Diploma Thesis, CTU of Prague, Prague.
• 8. KULISEK v., DVORAK M., VRBA P., SMOLIK J., JANOTA M., BURIAN D., 2009, Final report of project 1.2.2. form the 2009 year - part II., Inside report of RCMT, Pragu.
• 9. SMOLÎK J., 2008, Primary structural parts of machine tools made from unconventional materials, MATAR 2008 Proceedings, Prague.
• 10. RYBAR P., 2008, Software for Selection Components of Ball Screw Feed Drive, MATAR 2008 Proceedings, Prague.