Identification of strains in a multilayer composite pipe

• Autorzy: Krysiak P. , Kaleta J. , Gąsior P. , Błachut A. , Rybczyński R.

Identyfikatory

DOI

10.5604/01.3001.0010.7233

• Języki publikacji: EN

Abstrakty

EN

The paper presents the measurements and the analysis of deformations between layers and the outside surface of a multilayer filament wound composite pipe. The pipe was made through the hoop wrap of roving stripes hence ring-shaped samples were prepared for test purposes. Carbon fibers and glass fibers were used for winding. In the course of their manufacturing, strain gauges and fiber optic sensors were placed between the composite layers. Then, the strength tests were performed. The samples were subjected to the internal pressure of 30 MPa. During the tests peripheral deformations were measured on outside surfaces of individual layers of the structure.

Słowa kluczowe

EN

filament wound composites; high-pressure pipe; deformation measurement; FEM analysis

• Wydawca: Wydawnictwo Akademii Wojsk Lądowych imienia generała Tadeusza Kościuszki
• Czasopismo: Zeszyty Naukowe / Wyższa Szkoła Oficerska Wojsk Lądowych im. gen. T. Kościuszki
• Rocznik: 2017
• Tom: Nr 4
• Strony: 272--282
• Opis fizyczny: Bibliogr. 9 poz., rys., tab.

Twórcy

autor

Krysiak P.

• Military Institute of Engineer Technology, Wrocław

autor

Kaleta J.

• University of Science and Technology, Wrocław

autor

Gąsior P.

• University of Science and Technology, Wrocław

autor

Błachut A.

• University of Science and Technology, Wrocław

autor

Rybczyński R.

• University of Science and Technology, Wrocław

Bibliografia

• 1. Barbero E. J., Finite Element Analysis of Composite Materials using Abaqus; section: [in:] Computational Micromechanics – Analytical Homogenization. CRC Press, 2013.
• 2. Chuanxiang Z., Shaohui L., Stresses controllable analysis and optimal design of unique high pressure vessel applied in hydrogen charge station. [in:] Int J Hydrogen Energy 32:3508-3518. doi: 10.1016/j.ijhydene.2007.02.019.
• 3. Hamed A. F., Sapuan S. M., Hamdan M. M., Sahari B. B., Theoretical stress and strain distribution across thick-walled filament wound composite, [in:] Polimery, Vol. 54, 559-563, 2009.
• 4. Krysiak P., Błachut A., Babiarczuk B., Analiza struktury nawijanej rury kompozytowej na bazie włókien ciągłych. [in:] Interdisciplinary Journal of Engineering Sciences, Vol. IV, No. 1, 2016. http://ijes.pwr.wroc.pl/index.php/all/volume-iv/number-1.
• 5. Lekhnitskii S. G., Stress Distribution in a Composite Curvilinear Anisotropic Ring, [in:] Anisotropic Plates, Translated By Tsai S. W., Cheron T. New York, 1968, 110-114.
• 6. Littlefield A. G., Hyland E. J., Keating J. J., 120mm prestressed carbon fiber/thermoplastic overwrapped gun tubes, [in:] US Army RDECOM-ARDEC Benét Laboratories, 1 Buffington St, Watervliet, NY 12189, 2000, USA.
• 7. Митинский А. Н., Напряжения в толстостеной анизотропной трубе под действием наружного и внутреннего давлений, Сборник Леннградского Ордена Ленина Института Инженеров Железнодорожного Транспорта, Выпуск 136, 55-61, 1947, Москва.
• 8. Velosa J. C., Nunes J. P., Antunes P. J., Silva J. F., Marques A. T., Development of a new generation of filament wound composite pressure cylinders, [in:] Ciencia e Tecnologia dos Materiais, Vol. 19, n ½, (2007).
• 9. Verijenko V. E., Adali S., Tabakov P. Y., Stress distribution in continuously heterogeneous thick laminated pressure vessels, [in:] Composite Structures, 54, 371-377, 2001, London.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).