Phase change thermal energy storage : The experience of the materials preparation for the specific applications

• Autorzy: Klugmann-Radziemska E. , Wcisło P. , Denda H. , Ryms M.
• Języki publikacji: EN

Abstrakty

EN

Thermal energy storage and temperature stabilization is very important in many engineering applications. There are three kinds of thermal energy storage: sensible heat, latent heat and reversible chemical reaction heat. Phase change materials (PCM) absorb, store and release large amounts of energy in the form of latent heat, at constant temperature, called the transition temperature. Many innovative applications could be found for phase change materials in an increasingly growing field, which is protection of the environment through energy saving, use of renewable energy sources, especially solar, raising the efficiency of equipment and technologies in the industry, construction and transport. Main potential possibilities of using PCM materials are as follows: accumulation heat from the solar collectors and other renewable sources, the accumulation of heat in structural elements of buildings, the food industry. Therefore the applications of the PCM are of promising perspectives, especially in some climate regions. In the present paper, the experience of phase change material use for the specific applications and the results of its thermophysical properties examination are presented.

Słowa kluczowe

EN

thermal energy storage; temperature; experiment

PL

magazynowanie energii cieplnej; temperatura; eksperyment

• Wydawca: Polskie Towarzystwo Energetyki Słonecznej PTES - ISES
• Czasopismo: Polska Energetyka Słoneczna
• Rocznik: 2014
• Tom: nr 1-4
• Strony: 33--38
• Opis fizyczny: Bibliogr. 8 poz., rys., wykr.

Twórcy

autor

Klugmann-Radziemska E.

• Gdansk University of Technology, Faculty of Chemistry, Gdansk, Poland

autor

Wcisło P.

• Gdansk University of Technology, Faculty of Chemistry, Gdansk, Poland

autor

Denda H.

• Gdansk University of Technology, Faculty of Chemistry, Gdansk, Poland

autor

Ryms M.

• Gdansk University of Technology, Faculty of Chemistry, Gdansk, Poland

Bibliografia

• Carlson D., 1989, Low-cost power from thin-film PV, Electricity, Ed. Lund Uniyersity Press, Lund.
• Green M. A., 1992, Solar cells, University of New South Wales, Kensington.
• Huang M. J., Eames P. C., and Norton B., 2006, Phase change materials for limiting temperature rise in building integrated photovoltaics, Solar Energy, 80, No. 9,pp. 1121-1130.
• Radziemska E., Klugmann E., 2002, Thermally affected parameters of the current-voltage characteristics of silicon photocell, Energy Conversion and Management, Vol. 43, pp.1889.
• Radziemska E., 2003, The effect of temperature on the power drop in crystalline silicon solar cells, Renewable Energy, Vol. 28, pp. 1-12.
• Tripanagnostopoulos Y., Nousia T. H, Souliotis M., Yianoulis P., 2002, Hybrid photovoltaic /thermal solar systems, Solar Energy 72 No. 3, pp.217.
• Zondag H. A. at al., 2002, The thermal and electrical yield of a PV-thermal collector, Solar Energy, 72, No. 2, pp. 113.
• EN ISO 6946:2007 Building components and building elements. Thermal resistance and thermal transmittance. Calculation method.