Design of a metro door system and determination of main loads

• Autorzy: Blatnický Miroslav , Dižo Ján , Barta Dalibor , Droździel Paweł

Identyfikatory

DOI

10.20858/sjsutst.2019.105.5

• Języki publikacji: EN

Abstrakty

EN

This article discussed the determination of a metro vehicle’s door forces acting on its coarse structure. With previous articles addressing this issue, a definition of a specific reference vehicle was provided together with the collection of the normative requirements for metro vehicles. These form a basis for addressing the issue. The main objective hereof was to design a technical solution of a door system for the reference vehicle and create a parametric model of the door's forces acting on the vehicle’s rough structure. This model would serve to approximate and operatively quantify these force effects of the door to the vehicle’s structure by modifying the various input parameters. Therefore, it was necessary to create a mathematical model of the equilibrium conditions of the proposed door system and to quantify them using a developed software. Subsequently, these results served as inputs for the FEM analysis of the load-bearing components between the door and the vehicle’s structure.

Słowa kluczowe

EN

constructional design; door; metro; parametric model; calculation

PL

projekt konstrukcyjny; drzwi; metro; model parametryczny; obliczenie

• Wydawca: Wydawnictwo Politechniki Śląskiej
• Czasopismo: Zeszyty Naukowe. Transport / Politechnika Śląska
• Rocznik: 2019
• Tom: z. 105
• Strony: 49--64
• Opis fizyczny: Bibliogr. 35 poz.

Twórcy

autor

Blatnický Miroslav

• University of Žilina, Faculty of Mechanical Engineering, Department of Transport and Handling Machines, Univerzitná 8215/1, 010 26 Žilina, Slovak Republic

autor

Dižo Ján

• University of Žilina, Faculty of Mechanical Engineering, Department of Transport and Handling Machines, Univerzitná 8215/1, 010 26 Žilina, Slovak Republic

autor

Barta Dalibor

• University of Žilina, Faculty of Mechanical Engineering, Department of Transport and Handling Machines, Univerzitná 8215/1, 010 26 Žilina, Slovak Republic

autor

Droździel Paweł

• Lublin University of Technology, Faculty of Mechanical Engineering, Department of Transport, Combustion Engines and Ecology, Nadbystrzycka 36 Street, 20-618 Lublin

Bibliografia

• 1. Aristizabal Mauricio, Jaime L. Barbosa, German R. Betancur, Leonel F. Castañeda, Bogdan Żółtowski. 2014. “Structural diagnosis of rail vehicles and method for redesign”. Diagnostyka 15(3): 23-31.
• 2. Bureika Gintautas, Eduardas Gaidamauskas, Jonas Kupinas, Marijonas Bogdevicius, Stasys Steisunas. 2017. „Modelling the assessment of traffic risk at level crossing of Lithuanian railways”. Transport 32(3): 282-290. ISSN 1648-4142. DOI: 10.3846/16484142.2016.1244114.
• 3. Droppa Peter, Ivan Kopecký. 2014. „Possibility of using the thermos vision diagnostics for special mobile technics”. In 18th International Conference on Transport Means, „Transport Means 2014”: 393-396. Kaunas University of Technology and Klaipeda University, Lithuania. 23-24 October 2014, Kaunas, Lithuania. ISSN 1822-296 X.
• 4. Galliková Jana, Vladimír Stuchlý, Roman Poprocký, Peter Volna. 2018. „Model calculations of posterior reliability indicators for the proposal of the maintenance system”. MATEC Web of Conferences 157. eISSN 2261-236X. DOI: 10.1051/matecconf/201815708003.
• 5. Gerlici Juraj, Mykola Gorbunov, Kateryna Kravchenko, Prosvirova O, Tomas Lack. „Noise and temperature reduction in the contact of tribological elements during braking”. MATEC Web of Conferences 157. eISSN 2261-236X. DOI: 10.1051/matecconf/201815702010.
• 6. Gerlici Juraj, Mykola Gorbunov, Kateryna Kravchenko, Olga Prosvirova, Tomas Lack. 2017. „The innovative design of rolling stock brake elements”. Komunikacie (Communications - Scientific Letters of the University of Zilina) 19 (2): 23-28. ISSN 1335-4205.
• 7. Gerlici Juraj, Mykola Gorbunov, Kateryna Kravchenko, Olga Prosvirova, Tomas Lack, Vladimir Hauser. 2018. „Assessment of innovative methods of the rolling stock brake system efficiency increasing”. Manufacturing Technology 18 (1): 35-38. ISSN 1213-2489. DOI: 10.21062/ujep/49.2018/a/1213-2489/MT/18/1/35.
• 8. Gerlici Juraj, Tomas Lack, Zuzana Ondrova. 2007. „Evaluation of comfort for passengers of railway vehicles”. Komunikacie (Communications - Scientific Letters of the University of Zilina) 9(4): 44-49. ISSN 1335-4205.
• 9. Grenčík Juraj, Roman Poprocký, Jana Galliková, Peter Volna. 2018. „Use of the risk assessment methods in maintenance for more reliable rolling stock operation”. MATEC Web of Conferences 157. eISSN 2261-236X. DOI: 10.1051/matecconf/201815704002.
• 10. Guo Xinxin, Xuhai Pan, Zhilai Wang, Juan Yang, Min Hua, Juncheng Jiang. 2018. “Numerical simulation of fire smoke in extra-long river-crossing subway tunnels”. Tunnelling and underground space technology 82: 82-98. ISSN 0886-7798. DOI: 10.1016/j.tust.2018.08.002.
• 11. Hauser Vladimir, Olena Nozhenko, Kateryna Kravchenko, Mária Loulová, Juraj Gerlici, Tomáš Lack. 2017. “Impact of the wheel set steering and the wheel profile geometry to the vehicle behaviour when passing a curved track”. Manufacturing Technology 17 (3): 306-312. ISSN 1213-2489.
• 12. Jakubovicova Lenka, Milan Saga, Marian Handrik. „Numerical analysis of stiffener for hybrid drive unit”. MATEC Web of Conferences 157. eISSN 2261-236X. DOI: 10.1051/matecconf/201815702015.
• 13. Klimenda Frantisek, Josef Soukup. 2017. „Modal analysis of a thin aluminium plate”. Procedia Engineering 177: 11-16. ISSN 1877-7058. DOI: 10.1016/j.proeng.2017.02.176.
• 14. Kosicka E., Kozłowski E., Mazurkiewicz D. 2015. „The use of stationary tests for analysis of monitored residual processes”. Eksploatacja i Niezawodnosc – Maintenance and Reliability 17(4): 604–609. DOI: http://dx.doi.org/10.17531/ein.2015.4.17.
• 15. Kostrzewski Mariusz, Melnik, Rafał. 2017. „Numerical dynamics study of a rail vehicle with differential gears”. Procedia Engineering 192: 439-444. ISSN 1877-7058. DOI: 10.1016/j.proeng.2017.06.076.
• 16. Lack Tomas, Gerlici Juraj. 2008. „Analysis of vehicles dynamic properties from: the point of view of passenger comfort”. Komunikacie (Communications - Scientific Letters of the University of Zilina) 10(3): 10-18. ISSN 1335-4205.
• 17. Leitner Bohus, David Rehak, Robertas Kersys. 2018. „The new procedure for identification of infrastructure elements significance in sub-urban railway transport”. Communications – Scientific Letters of the University of Zilina 20 (2): 41-48. ISSN 1335-4205.
• 18. Loulová Mária, Andrej Suchánek, Jozef Harušinec. 2017. „Evaluation of the parameters affecting passenger riding comfort of a rail vehicle”. Manufacturing Technology 17 (2): 224-231. ISSN 1213-2489.
• 19. Luskova Maria, Bohus Leitner. 2018. „Extreme weather impact on transportation and energy infrastructure”. In 22nd International Scientific on Conference „Transport Means 2018”: 569-573. Kaunas University of Technology, Kaunas, Lithuania. 03-05 October 2018, Trakai, Lithuania. ISSN 1822-296 X.
• 20. Madleňáková Lucia, Matúšková Mária, Madleňák Radovan, Rudawska Anna, Rybicka Iwona. 2018. “Solutions of the Roller Conveyor in Terms of Logistics Provider”. Advances in Science and Technology Research Journal Volume 12(4): 1-9. December 2018. DOI: https://doi.org/10.12913/22998624/92098.
• 21. Melnik Rafał, Mariusz Kostrzewski. 2012. „Rail vehicle’s suspension monitoring system – analysis of results obtained in tests of the prototype”. Key Engineering Materials 518: 281-288. ISSN 1013-9826. DOI: 10.4028/www.scientific.net/KEM.518.281.
• 22. Michalski R., S. Wierzbicki. 2008. „An analysis of degradation of vehicles in operation”. Eksploatacja i Niezawodnosc – Maintenance and Reliability 1: 30-32.
• 23. Sapietova Alzbeta, Juraj Bukovan, Milan Sapieta, Lenka Jakubovicova. 2017. „Analysis and implementation of the input load effects on an air compressor piston in MSC.ADAMS”. Procedia Engineering 177: 554-561. ISSN. 1877-7058. DOI: 10.1016/j.proeng.2017.02.260.
• 24. Skliros Christos, Esperon Miguez Manuel, Fakhre Ali, Jennions Ian. 2019. „A review of model based and data driven methods targeting hardware systems diagnostics”. Diagnostyka 20(1): 3-21. DOI: https://doi.org/10.29354/diag/99603.
• 25. Skrucany Tomas, Martin Kendra, Milan Skorupa, Juraj Grencik, Tomasz Figlus. 2017 „Comparison of selected environmental aspects in the individual road transport and the railway passenger transport”. Procedia Engineering 192: 806-811. ISSN 1877-7058. DOI: 10.1016/j.proeng.2017.06.139.
• 26. Šťastniak Pavol. 2015. „Wagon chassis frame design with adaptable loading platform”. Manufacturing Technology 15 (5): 935-940. ISSN 1213-2489.
• 27. Šťastniak Pavol, Marian Moravčík, Peter Baran, Lukáš Smetanka. 2018. „Computer aided structural analysis of newly developed railway bogie frame”. MATEC Web of Conferences 157. eISSN 2261-236X. DOI: 10.1051/matecconf/201815702051.
• 28. Suchánek Andrej, Jozef Harušinec, Mária Loulová, Peter Strážovec. 2018. „Analysis of the distribution of temperature fields in the braked railway wheel”. MATEC Web of Conferences 157. eISSN 2261-236X. DOI: 10.1051/matecconf/201815702048.
• 29. Svoboda Martin, Josef Soukup, Alena Petrenko. 2014. „Use of FEM programs in solving general unbalance simple mechanical system of rigid, flexible stored bodies”. In 52nd International Conference on Experimental Stress Analysis „EAN 2014”. Jan Evangelista Purkyně University, Ústí nad Labem, Czech Republic. 2-5 June 2014, Marianske Lazne, Czech Republic. ISBN 978-8023-1037-7.
• 30. Vatulia Glib, Anatoliy Falendysh, Yevhen Orel, Mykhailo Pavliuchenkov. 2017. „Structural improvements in a tank wagon with modern software packages”. Procedia Engineering 187: 301-307. ISSN 1877-7058. DOI: 10.1016/j.proeng.2017.04.379.
• 31. Figlus Tomasz, Łukasz Kuczynski. 2018. „Selection of a semi-trailer for the haulage of long oversize loads, taking into account an analysis of operational damage". XI International Science-Technical Conference Automotive Safety. Publisher: IEEE, DOI: 10.1109/AUTOSAFE.2018.8373342.
• 32. Wang Wenhe, Tengfei He, Wie Huang, Ruiqing Shen, Qingsheng Wang. 2018. „Optimization of switch modes of fully enclosed platform screen doors during emergency platform fires in underground metro station”. Tunnelling and underground space technology 81: 277-288. ISSN 0886-7798. DOI: 10.1016/j.tust.2018.07.015.
• 33. Yao Shunguang, Xianliang Xiao, Ping Xu, Qiuyun, Quanwei Che. 2018. „The impact performance of honeycomb-filled structures under eccentric loading for subway vehicles”. Thin-walled structures 123: 360-370. ISSN 0263-8231. DOI: 10.1016/j.tws.2017.10.031.
• 34. Żółtowski Bogdan, Żółtowski Mariusz. 2018. „Selection measure of energy propagation in vibration diagnostic and modal analysis methods”. Diagnostyka 19(4): 19-26. DOI: https://doi.org/10.29354/diag/94753.
• 35. Žaldarys G., S.J. Chodočinskas, A. Štuopys. 2008. “Investigation of rail metal of Kaunas fortress fortification narrow – gauge railway”. Mechanika 5(73): 74-78. ISSN 1392-1207.

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).