Electromagnetic locking devices of car handling units

• Autorzy: Hrabovský Leopold , Fedorko Gabriel , Mlýnek Lukáš , Michalik Peter

Identyfikatory

DOI

10.20858/sjsutst.2020.107.5

• Języki publikacji: EN

Abstrakty

EN

This paper contains the design of a testing device, which was constructed for the purposes of checking functional properties of the innovative solutions of variants of electromagnetic locking devices with potentials of replacing current mechanical brakes used for stopping pallets with loaded cars in parking houses developed by the company KOMA - Industry s.r.o. The testing device consists of two positioning tables, whose moveable parts are anchored perpendicular to each other in the frame of the testing device. An electromagnet and a solenoid generating the force needed for stopping the motion of the pallet is connected to the moveable part of the upright positioning table. The brake ramp made of a ferromagnetic material has a hole at its top surface into which the pin of the solenoid is inserted and is attached to the horizontal moveable part of the positioning table. This paper presents holding force values of the electromagnet, which were obtained by experimental measuring on the created testing unit.

Słowa kluczowe

EN

electromagnetic force; testing device; braking of manipulation units

PL

siła elektromagnetyczna; urządzenie testujące

• Wydawca: Wydawnictwo Politechniki Śląskiej
• Czasopismo: Zeszyty Naukowe. Transport / Politechnika Śląska
• Rocznik: 2020
• Tom: z. 107
• Strony: 73--83
• Opis fizyczny: Bibliogr. 12 poz.

Twórcy

autor

Hrabovský Leopold

• Faculty of Mechanical Engineering, VŠB - Technical University of Ostrava, 17. listopadu 2172/15, 708 00 Ostrava - Poruba, Czech Republic

autor

Fedorko Gabriel

• Faculty of Mechanical Engineering, VŠB - Technical University of Ostrava, 17. listopadu 2172/15, 708 00 Ostrava - Poruba, Czech Republic

autor

Mlýnek Lukáš

• KOMA - Industry s. r. o., Ruská 514/41, 703 00 Ostrava - Vítkovice, Czech Republic

autor

Michalik Peter

• Faculty of Manufacturing Technologies with a seat in Prešov, Technical University of Košice, Bayerova 1, 080 01 Prešov, Slovak Republic

Bibliografia

• 1. Hrabovsky Leopold, David Dluhos. 2019. „Calibration of transducers and of a coil compression spring constant on the testing equipment simulating the process of a pallet positioning in a rack cell“. Open Engineering 9(1): 631-640. ISSN: 2391-5439. DOI: 10.1515/eng-2019-0072.
• 2. MN Systems. Linear Motion Solution. Available at: https://www.mnsystems.cz/manualni-polohovaci-systemy/polohovaci-stoly/s-digitalnimukazatelem/dlouh%C3%A9-1/pt8625-pae-detail.
• 3. Hrabovsky Leopold, Tomas Mlcak, Gustav Kotajny. 2019. „Forces Generated in the parking brake of the pallet locking system”. Advances in Science and Technology Research Journal 13(4):181-187. ISSN 2299-8624. DOI: https://doi.org/10.12913/22998624/112835.
• 4. Ampul. Available at: https://ampul.cz/elektromagnety/elektromagnet-18kg-180n34x18mm-12v.
• 5. Hrabovsky Leopold, Tomas Mlcak. 2020. „Vertical forces acting on the lock-off element of the pallet brake system”. Advances in Science and Technology Research Journal 14(1). ISSN 2299-8624. DOI: https://doi.org/10.12913/22998624/113607.
• 6. GM Electronic. Available at: https://www.gme.cz/prumyslovy-koncovy-spinac-me-9101-pruzina.
• 7. Vilém M., J. Knejzlík, J. Kopečný, I. Novotný. 1991. Fyzikální měření. [In Czech: Physical measurements]. SNTL Praha. ISBN: 80-03-00266-4.
• 8. Molnar Vieroslav, Gabriel Fedorko, Beata Stehlikova, Peter Michalik, Melichar Kopas. 2014. „Mathematical models for indirect measurement of contact forces in hexagonal idler housing of pipe conveyor”. Measurement 47: 794-803. DOI: https://doi.org/10.1016/j.measurement.2013.10.012.
• 9. ČSN 73 6056: 2011. Odstavné a parkovací plochy silničních vozidel. Úřad pro technickou normalizaci, metrologii a státní zkušebnictví České republiky. [In Czech: ČSN 73 6056: 2011. Parking areas for road vehicles. Czech Office of Standards, Metrology and Testing].
• 10. Hrabovsky Leopold, Peter Michalik. 2017. „A tension equalizer in lift carrying ropes”. Advances in Science and Technology Research Journal 11(4): 326-332. ISSN 2299-8624. DOI: https://doi.org/10.12913/22998624/80936.
• 11. GM Electronic. Available at: https://www.gme.cz/dvojity-laboratorni-zdroj-diametralp230r51d.
• 12. Manish Patkar, Ashish Dhamaniya. 2019. „Effect of on-street width and capacity of urban arterial roads in India”. European Transport \ Trasporti Europei. Issue 73. Paper no 1. ISSN 1825.