Study on properties of multipole switched reluctance motor designed for multichannel operation – single channel operation analysis

• Autorzy: Korkosz Mariusz , Bogusz Piotr , Prokop Jan , Zasowski Piotr

Identyfikatory

DOI

10.24425/bpasts.2025.153428

• Języki publikacji: EN

Abstrakty

EN

The following paper deals with the multipole design of the switched reluctance motor (SRM). The design is intended to facilitate the four-channel operation of the motor. Due to multipole design of the rotor and multichannel operation abilities, there are numerous potential configurations for powering the poles in each phase. Analysis of a selection of such configurations was carried out, including multichannel (MC) operating conditions (e.g., single-channel operation (SCO)). A mathematical model of three-phase MC SRM is also presented. The static electromagnetic torque characteristics were obtained together with the self-and mutual inductance characteristics. Selected laboratory test results are likewise presented in the paper.

Słowa kluczowe

EN

multichannel; switched reluctance motor; critical drive; increased redundancy drive; single-channel operation

PL

wielokanałowość; silnik reluktancyjny przełączalny; dysk krytyczny; operacja jednokanałowa

• Wydawca: Polska Akademia Nauk, Wydział IV Nauk Technicznych
• Czasopismo: Bulletin of the Polish Academy of Sciences. Technical Sciences
• Rocznik: 2025
• Tom: Vol. 73, nr 4
• Strony: art. no. e153428
• Opis fizyczny: Bibliogr. 15 poz., rys., tab., wykr.

Twórcy

autor

Korkosz Mariusz

• Faculty of Electrical and Computer Engineering, Rzeszow University of Technology, Rzeszow, Poland

• https://orcid.org/0000-0002-9097-0988

autor

Bogusz Piotr

• Faculty of Electrical and Computer Engineering, Rzeszow University of Technology, Rzeszow, Poland

• https://orcid.org/0000-0001-8726-5172

autor

Prokop Jan

• Faculty of Electrical and Computer Engineering, Rzeszow University of Technology, Rzeszow, Poland

• https://orcid.org/0000-0003-1640-0642

autor

Zasowski Piotr

• Faculty of Electrical and Computer Engineering, Rzeszow University of Technology, Rzeszow, Poland

• https://orcid.org/0009-0009-3402-1225

Bibliografia

• [1] T.J.E. Miller, “Switched reluctance motor and their control” in Magna Physics, Oxford University Press, 1993.
• [2] A.A. Arkadan and B.W. Kielgas, “Switched reluctance motor drive systems dynamic performance prediction under internal and external fault conditions”, IEEE Trans. Energy Conv., vol. 9, no. 1, pp. 45–52, 1994, doi: 10.1109/60.282475.
• [3] H. Chen, G. Han, W. Yan, S. Lu, and Z. Chen, “Modeling of a Switched Reluctance Motor Under Stator Winding Fault Condition”, IEEE Trans. Applied Superconduct., vol. 26, no. 4, p. 0604106, 2016, doi: 10.1109/TASC.2016.2539678.
• [4] Y. Hu, C. Gan, W. Cao, J. Zhang, W. Li, and S.J. Finney, “Flexible Fault-Tolerant Topology for Switched Reluctance Motor Drives”, IEEE Trans. Power Electron., vol. 31, no. 6, pp. 4654–4668, 2016, doi: 10.1109/TPEL.2015.2477165.
• [5] M. Korkosz, P. Bogusz, J. Prokop, B. Pakla, and G. Podskarbi, “Comparative Analysis of Fault-Tolerant Dual-Channel BLDC and SR Motors”, Energies, vol. 12. no. 13, p. 2489, 2019, doi: 10.3390/en12132489.
• [6] S.M.H. Mousavi, S.M. Mirbagheri, S.S.S.G. Sefid, and S.E.S.G. Sefid, “Simulation of a new multiphase BLDC motor drive”, 2012 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), doi: 10.1109/ PEDES.2012.6484304.
• [7] A. Mohammadpour and L. Parsa, “Global Fault-Tolerant Control Technique for Multiphase Permanent-Magnet Machines”, IEEE Trans. Ind. Appl., vol. 51, no. 1, pp. 178–186, 2015, doi: 10.1109/TIA.2014.2326084.
• [8] B. Anvari, Y. Li, and H.A. Toliyat, “Design of multiphase exterior rotor switched reluctance motor for traction applications”, 2016 IEEE 25th International Symposium on Industrial Electronics (ISIE), 2016, doi: 10.1109/ISIE.2016.7744883.
• [9] B. Tian, G. Mirzaeva, Q.-T. An, L. Sun, and D. Semenov, “Fault-Tolerant Control of a Five-Phase Permanent Magnet Synchronous Motor for Industry Applications”, IEEE Trans. Ind. Appl., vol. 54., no. 4, 2018, doi: 10.1109/TIA.2018.2820060.
• [10] X. Deng and B. Mecrow, “A comparison of conventional and segmental rotor 12/10 switched reluctance motors”, 2019 IEEE International Electric Machines & Drives Conference (IEMDC), 2019, doi: 10.1109/IEMDC.2019.8785221.
• [11] W. Ding, “Comparative Study on Dual-Channel Switched Reluctance Generator Performances Under Single- and Dual-Channel Operation Modes”, IEEE Trans. Energy Conv., vol. 27, no. 3, pp. 680–688, 2012, doi: 10.1109/TEC.2012.2194497.
• [12] W. Ding, L. Liu, J. Lou, and Y. Liu, “Comparative Studies on Mutually Coupled Dual-Channel Switched Reluctance Machines With Different Winding Connections”, IEEE Trans. Magn., vol. 49, no. 11, pp. 5574–5589, 2013, doi: 10.1109/TMAG.2013. 2271753.
• [13] P. Bogusz., M. Korkosz, and J. Prokop, “Modelling and performance analysis of dual-channel switched reluctance motor”, Arch. Electr. Eng., vol. 64, no. 1, pp. 89–105, 2015, doi: 10.1515/ aee-2015-0009.
• [14] Q. Chen, D. Xu, L. Xu, J. Wang, Z. Lin, and X. Zhu, “Fault-Tolerant Operation of a Novel Dual-Channel Switched Reluctance Motor Using Two 3-Phase Standard Inverters”, IEEE Trans. Applied Superconduct., vol. 28, no. 3, p. 5204205, 2018, doi: 10.1109/TASC.2018.2799838.
• [15] ANSYS. Ansys Electronics Release 2024 R1, ANSYS Inc.: Canonsburg, PA, USA, 2024.