Influence and optimization of the setting of input parameters of laser profilometry by the surface measurement manufactured by the AWJ technology

• Autorzy: Mitaľ Gerhard , Gajdoš Ivan , Ružbarsky Juraj , Jachowicz Tomasz , Majewski Łukasz

Identyfikatory

DOI

10.12913/22998624/86474

• Języki publikacji: EN

Abstrakty

EN

The publication deals with the measurement and evaluation of roughness parameters by means of laser profiling, and its main task is to determine the effect of selecting the internal gain adjustment (Gain mode) on measured roughness values of the surface treated by the water beam technology. The publication details the software, hardware, and other parts of the device designed to measure the roughness of different types of surfaces. It further describes the behavior of individual parts of the apparatus as a whole and methods of measuring the roughness of the surface along a defined profile section by means of the triangulation principle of laser profiling. The measured sample was cut by a thick (rough) cut at pressure of 380 MPa. As an abrasive, the Australian Grenade with the grain Mesh 50 was used.The experiment was carried out at the Faculty of Production Technologies in the Laboratory of Roughness Measurement at the Department of technical systems design and monitoring in Prešov. Measurement of surface roughness parameters was performed on an optical measuring system to control surface parameters and the contact roughness meter Mitutyo SJ400.

Słowa kluczowe

EN

AWJ; laser; measurement; roughness; profilometry; contactless; contact; method

PL

AWJ; laser; pomiary; chropowatość; profilometria; kontakt; metoda

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2018
• Tom: Vol. 12, no 1
• Strony: 329--337
• Opis fizyczny: Bibliogr. 13 poz., fig., tab.

Twórcy

autor

Mitaľ Gerhard

• Faculty of Manufacturing Technology, Technical university of Košice, Department of technical system design and monitoring, Štúrova 31, 080 01 Prešov, Slovakia

autor

Gajdoš Ivan

• Technical University of Košice, Faculty of Mechanical Engineering, Institute of Technologies and Management. Mäsiarska 74, Košice 040 01, Slovak Republic

autor

Ružbarsky Juraj

• Faculty of Manufacturing Technology, Technical university of Košice, Department of technical system design and monitoring, Štúrova 31, 080 01 Prešov, Slovakia

autor

Jachowicz Tomasz

• Lublin University of Technology, Faculty of Mechanical Engineering, Department of Polymer Processing, 36 Nadbystrzycka Street, 20-618 Lublin, Poland

autor

Majewski Łukasz

• Lublin University of Technology, Faculty of Mechanical Engineering, Department of Polymer Processing, 36 Nadbystrzycka Street, 20-618 Lublin, Poland

Bibliografia

• 1. Gerková, Jana,: Experimental verification of the effect the welding speed on the work piece surface quality technology AWJ. Prešov, 2015 (in Slovak).
• 2. Hloch, S., Valíček, J. Vplyv faktorov na topografiu povrchov vytvořených hydroabrazívnym delením. Prešov: FVT Technická univerzita, 2008, ISBN 978–80–553–0091–7.
• 3. ISO 16610–21,: Geometrical product specifications (GPS), 2011.
• 4. LPMView. 2015,: User Guide – Kvant Ltd. Prešov, FVT TUKE, pp. 44. (in Slovak).
• 5. Kamieńska-Krzowska B., Kłonica M.: The role of surface topography measurement strategy on the evaluation of selected roughness parameters. Mechanik 2014, 8-9, 138-145.
• 6. Kuczko W., Wichniarek R., Górski F., Bun P. Application Of Additively Manufactured Polymer Composite Prototypes In Foundry. Advances In Science And Technology-Research Journal, 2015, 9, 26, 20-27.
• 7. Mitaľ G., Ružbarsky J,: Methodology non-contact measurement and evaluation roughness machined surfaces using laser profilometry. 2016. Prešov (Slovak).
• 8. Panda, A., Prislupčák, M., Pandová, I,: Progressive technology diagnostic and factors affecting to ma-chinability. In: Applied Mechanics and Materials 2014, 616, 183–190.
• 9. Prislupčá, M., Panda, A., Jančík, M., Pandová, I., Orendáč, P., Krenický, T.: Diagnostic and experimental valuation on progressive machining unit. Applied Mechanics and Materials 2014, 616, 191–199.
• 10. Raja, J., Muralikrishnan, B., Shengyu, F,: Recent advances in separation of roughness, waviness and form. Precision Engineering. of the International Societies for Precision Engineering and Nanotechnology 2002, 26, 2, 222-235.
• 11. STN EN ISO 11562,: Geometrical product specifications – GPS. 1996 (in Slovak).
• 12. Valíček, J., Hloch, S., Dražan,: 2009. Study of surface topography created by abrasive waterjet cutting. Sla-vonski Brod , Strojarski fakultet 2009, p. 101.
• 13. Šustek J.: Laserový profilometer LPM s horizontálnym posunom pri sledovaní nerovnosti povrchu. Trieskové a beztrieskové obrábanie dreva 2010: VII. medzinárodná vedecká konferencia. Zvolen: Tech-nická univerzita vo Zvolene, 2010, 187–192.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).