PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The experimental study of compaction parameters and elastic after-effect of fine fraction raw materials

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Mining and metallurgical enterprises generate a significant amount of secondary raw material resources having small-fractions (below 3 mm). A significant volume of these materials can be returned into the production process by the use of the briquetting method. The quality of briquettes, in particular, their strength, is significantly affected by a phenomenon called elastic after-effect. For a theoretical study of the elastic after-effect influence on the quality of the briquettes, taking into account the pressing tool configuration, experimental data are obtained for three materials (peat, kaolin and manganese concentrate). Results are in creating the analytical relations (regression models) having enough high accuracy to describe the dependence of compaction coefficient, elastic after-effect, density and elastic heave (decompaction) on an external pressure in the compaction machine.
Czasopismo
Rocznik
Tom
Strony
7--18
Opis fizyczny
Bibliogr. 15 poz., rys., tab.
Twórcy
  • Technological Equipment and Control Systems Department, Z.I. Nekrasov Iron and Steel Institute of National Academy of Sciences of Ukraine, 1 Acad. Starodubov sq., 49005 Dnipro, Ukraine
  • Technological Equipment and Control Systems Department, Z.I. Nekrasov Iron and Steel Institute of National Academy of Sciences of Ukraine, 1 Acad. Starodubov sq., 49005 Dnipro, Ukraine
  • Technological Equipment and Control Systems Department, Z.I. Nekrasov Iron and Steel Institute of National Academy of Sciences of Ukraine, 1 Acad. Starodubov sq., 49005 Dnipro, Ukraine
autor
  • Faculty of Geoengineering, Mining and Geology, Wroclaw University of Science and Technology, 15 Na Grobli st., 50-421 Wroclaw, Poland
  • Information System Department, State Higher Educational Institution "Ukrainian State University of Chemical Technology", 8 Gagarin Ave., 49005 Dnipro, Ukraine
Bibliografia
  • AL-HAJ IBRAHIM H., ABDULLAH A., 2014, Upgrading delayed petroleum coke fines by the use of pitch binders, Chemical Engineering and Science, Vol. 2, No. 2, 15–17, https://doi.org/10.12691/ces-2-2-1.
  • BAYUL K.V., 2012, Effect of the geometrical parameters of roll press forming elements on the briquetting process: analytical study, Powder Metallurgy and Metal Ceramics, Vol. 51, No. 3–4, 157–164, https://doi.org/10.1007/s11106-012-9411-8.
  • DAVIES R.M., DAVIES O.A., 2013, Physical and combustion characteristics of briquettes made from water hyacinth and phytoplankton scum as binder, Journal of Combustion, Hindawi Publishing Corporation, Vol. 2013, Article ID 549894, 7 pages, http://dx.doi.org/10.1155/2013/549894.
  • HENNING C.N., LEOKAOKE N.T., BUNT J.R. WAANDERS F.B., 2018, Testing of briquettes made from witbank coal fines with polyvinyl alcohol as binder, 10th Int. Conference on Advances in Science, Engineering, Technology and Healthcare (ASETH-18), Nov. 19–20, 2018, Cape Town (South Africa).
  • KHUDYAKOV A.Yu., VASHCHENKO S.V., BAIUL K.V., SEMENOV Yu.S., 2018, Kaolin raw material briquetting for lump chamotte production, Refractories and Industrial Ceramics. Vol. 59 (4), 333–337, https://doi.org/10.1007/s11148-018-0231-3.
  • KIEUSH L., BOYKO M., KOVERIA A., KHUDYAKOV A., RUBAN A., 2019, Utilization of the prepyrolyzed technical hydrolysis lignin as a fuel for iron ore sintering, Eastern-European Journal of Enterprise Technologies, No. 1/6 (97), 34–39.
  • KINOSHITA S., YAMAMOTO S., DEGUCHI T., SHIGEHISA T., 2010, Demonstration of upgraded brown coal (UBC) process by 600 tonnes/day plant, KOBELCO Technology Review, No. 29, 93–98.
  • KRIŽAN P., ŠOOŠ L., VUKELIČ Đ., 2009, A study of impact technological parameters on the briquetting process, Sci. J. Facta Univ., 6, 39–47.
  • RABINOVICH M.L., 2014, Lignin by-products of soviet hydrolysis industry: resources, characteristics, and utilization as a fuel, Cellulose Chemistry and Technology, Vol. 48, No. 7–8, 613–631.
  • RAI S., WASEWAR K.L., MUKHOPADHYAY J., YOO C.K. USLU H., 2012, Neutralization and utilization of red mud for its better waste management, Arch. Environ. Sci., 6, 13–33.
  • RAMACHANDRA RAO S., 2006, Resource recovery and recycling from metallurgical wastes, Waste Management Series, 7, Elsevier B.V., ISBN: 978-0-08-045131-2.
  • RÖSLER G., LEUCHTENMÜLLER M., ANTREKOWITSCH J., 2016, Possible alternative secondary resources for the production of ferroalloys, XXX microCAD International Multidisciplinary Scientific Conference, University of Miskolc, Hungary, 21–22 April 2016, ISBN 978-963-358-113-1, https://doi.org/10.26649/musci.2016.011.
  • SWIETOCHOWSKI A., LISOWSKI A., DABROWSKA-SALWIN M., 2016. Strength of briquettes and pellets from energy crops, [in:] Engineering for Rural Development, 547–551.
  • VASHCHENKO S.V., KHUDYAKOV A.Yu., BAIUL K.V., SEMENOV Yu.S., Selecting the batch composition in briquetting, Steel in Translation, 2018, Vol. 48, No. 8, 509–512, https://doi.org/10.3103/S0967091218080132.
  • ZHDANOV A.V., ZHUCHKOV V.I., DASHEVSKII V.Ya., LEONT’EV L.I., 2015, Problems with waste generation and recycling in the ferroalloys industry, Metallurgist, March 2015, Vol. 58, No. 11–12, 1064–1070, https://doi.org/10.1007/s11015-015-0041-5.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-8639fa5d-a661-4e0f-996c-fd46897267af
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.