An Analysis of the Joints’ Properties of Fine-Grained Steel Welded by the MAG and SAW Methods

• Autorzy: Krawczyk R.

Identyfikatory

DOI

10.1515/amm-2016-0266

• Języki publikacji: EN

Abstrakty

EN

The article presents an analysis of properties of welded joints of fine-grained steel of P460NH type used more and more often in the modern constructions. A process of examining a technology of welding has been carried out on the thick-walled butt joints of sheet metal by two methods of welding namely MAG – 135 and SAW – 121. The article deals with a topic of optimizing a process of welding thick-walled welded joints of fine-grained steel due to their mechanicalproperties and efficiency

Słowa kluczowe

EN

welding; properties of joints; fine-grained types of steel; non-destructive testing; destructive testing; optimizing a process of welding

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 3
• Strony: 1641--1648
• Opis fizyczny: Bibliogr. 27 poz., rys., tab., wzory

Twórcy

autor

Krawczyk R.

• Politechnika Częstochowska, 69 J. H. Dąbrowskiego Str., 42-201 Częstochowa, Poland

Bibliografia

• [1] PN-EN ISO 4063:2011, Spawanie i procesy pokrewne - Nazwy i numery procesów
• [2] Praca zbiorowa, Poradnik inżyniera - Spawalnictwo tom II, WNT, Warszawa 2005
• [3] B. Pierożek, J. Lassociński, Spawanie łukowe stali w osłonach gazowych. WNT, Warszawa 1987
• [4] R. Krawczyk, Zakresy parametrów spawania w zależności od przenoszenia metalu w łuku spawalniczym. Biuletyn Instytutu Spawalnictwa. Nr 4/2014
• [5] J. Węgrzyn, R. Korkiewicz, Automatyczne spawanie i napawanie pod topnikiem, WNT, Warszawa 1966
• [6] PN-CR ISO 15608:2002, Spawanie - Wytyczne systemu podziału materiałów metalowych na grupy
• [7] PN-EN 10028-3:2009, Wyroby płaskie ze stali na urządzenia ciśnieniowe - Część 3: Stale spawalne drobnoziarniste normalizowane
• [8] J. Brózda, Stale konstrukcyjne i ich spawalność, instytut Spawalnictwa, Gliwice 2009
• [9] PN-EN ISO 15614-1:2008, Specyfikacja i kwalifikowanie technologii spawania metali - Badanie technologii spawania - Część 1: Spawanie łukowe i gazowe stali oraz spawanie łukowe niklu i stopów niklu
• [10] T. Węgrzyn, J. Piwnik, B. Łazarz, D. Hadryś, Main micro-jet cooling gases for steel welding, Archives of Metallurgy and Materials 58, issue 2, 555 – 557 (2013).
• [11] T. Węgrzyn, J. Piwnik, D. Hadryś, Oxygen in steel WMD after welding with micro-jet cooling, Archives of Metallurgy and Materials 58, issue 4, 1067 – 1070 (2013).
• [12] W. Tarasiuk, B. Szczucka-Lasota, J. Piwnik, W. Majewski, Tribological Properties of Super Field Weld with Micro-Jet Process, Adv. Mat. Res. 1036, 452-457 (2014).
• [13] T. Węgrzyn, T. Piwnik, J. Wieszała, D. Hadryś, Control over the steel welding structure parameters by micro-jet cooling. Archives of Metallurgy and Materials, ISS 1, 57, 3, 679-685 (2012).
• [14] T. Węgrzyn, The Classification of Metal Weld Deposits in Terms of the Amount of Oxygen. PROC OF ISOPE, IV, 1999, 212 – 216.
• [15] T. Węgrzyn, The Classification of Metal Weld Deposits in Terms of the Amount of Nitrogen. Procedings of ISOPE´2000, V, 130 – 134 (2000).
• [16] B. Szczucka-Lasota, B. Formanek, A. Hernas, K. Szymański, Oxidation models of the growth of corrosion products on the intermetallic coatings strengthened by a fine dispersive Al2O3. Journal of Materials Processing Technology 164-165, 935 – 939 (2005).
• [17] J. Słania, influence of phase transformations in the temperature ranges of 1250-1000°C and 650-350°C on the ferrite content in austenitic welds made with T 23 12 LRM3 tubular electrode. Metallurgy and Materials, 3, 2010-2014 (2005).
• [18] R. Burdzik, P. Folęga, B. Łazarz, Z. Stanik, J. Warczek, Analysis of the impact of surface layer parameters on wear intensity of friction pairs. Archives of Metallurgy and Materials, 57, 4, 987 – 993 (2012).
• [19] K. Lukaszkowicz, A. Kriz, J. Sondor: Structure and adhesion of thin coatings deposited by PVD technology on the X6CrNiMoTi17-12-2 and X40 CrMoV5-1 steel substrates. Materials Science and Engineering, 51, 40-47.
• [20] A. Lisiecki, Diode laser welding of high yield steel. Proc. of SPIE Vol. 8703, Laser Technology 2012, Applications of Lasers 87030S (January 22, 2013), DOI: 10.1117/12.2013429.
• [21] A. Lisiecki, Welding of titanium alloy by Disk laser. Proc. of SPIE Vol. 8703, Laser Technology 2012: Applications of Lasers 87030T (January 22, 2013), DOI: 10.1117/12.2013431.
• [22] G. Golański, A. Zieliński, J. Słania, J. Jasak, Mechanical Properties of VM12 steel after 30 000hrs of ageing at 600°C temperature. Archives of Metallurgy and Materials, 59, 2 (2014).
• [23] G. Golański, P. Gawień, J. Słania, Examination of Coil Pipe Butt Joint Made of 7CrMoVTib10 - 10(T24) Steel After Service, Archives of Metallurgy and Materials, 57, 2, (2012).
• [24] B. Oleksiak, J. Labaj, J. Wieczorek, A. Blacha-Grzechnik, R. Burdzik, Surface tension of cu-bi alloys and wettability in a liquid alloy - refractory material - gaseous phase system, Arch. Metall. Mater. 59(1), 281-285 (2014).
• [25] B. Oleksiak, G. Siwiec, A. Blacha-Grzechnik, J. Wieczorek, The obtained of concentrates containing precious metals for pyrometallurgical processing, Metalurgija 53(4), 605-608 (2014).
• [26] R. Burdzik, Ł. Konieczny, Research on structure, propagation and exposure to general vibration in passenger car for different damping parameters, J. of Vibroengineering 15(4), 1680-1688 (2013).
• [27] R. Burdzik, Research on the influence of engine rotational speed to the vibration penetration into the driver via feet - multidimensional analysis. Journal of Vibroengineering, 15, 4, 2114-2123 (2013).