Abrasive wear of AlSi12-Al2O3 Composite materials manufac tired by pressure infiltration

• Autorzy: Kremzer M. , Dziekońska M. , Sroka M. , Tomiczek B.

Identyfikatory

DOI

10.1515/amm-2016-0207

• Języki publikacji: EN

Abstrakty

EN

The aim of this study is to investigate tribological properties of EN AC-AlSi12 alloy composite materials matrix manufactured by pressure infiltration of Al₂O₃ porous preforms. In the paper, a technique of manufacturing composite materials was described in detail as well as wear resistance made on pin on disc was tested. Metallographic observations of wear traces of tested materials using stereoscopic and confocal microscopy were made. Studies allow concluding that obtained composite materials have much better wear resistance than the matrix alloy AlSil2. It was further proved that the developed technology of their preparation consisting of pressure infiltration of porous ceramic preforms can find a practical application.

Słowa kluczowe

EN

abrasive wear; composite materials; pressure infiltration

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 3
• Strony: 1255--1260
• Opis fizyczny: Bibliogr. 29 poz., rys., tab.

Twórcy

autor

Kremzer M.

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, 18A Konarskiego str., 44-100 Gliwice, Poland

autor

Dziekońska M.

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, 18A Konarskiego str., 44-100 Gliwice, Poland

autor

Sroka M.

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, 18A Konarskiego str., 44-100 Gliwice, Poland

autor

Tomiczek B.

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, 18A Konarskiego str., 44-100 Gliwice, Poland

Bibliografia

• [1] Commission Regulation (EU) No. 459/2012, Official Journal of the European Union, 142, 16 (2012).
• [2] Commission Regulation (EU) No 595/2009, Official Journal of the European Union, 188, 1 (2009).
• [3] D. K. Koli, G. Agmhorti, R. Purohit, Mater Today 2 (4-5), 3032-3041 (2015).
• [4] A. G. Arsha, E. Jayakumar, T. P. D. Rajan, V. Antony, B. C. Pai, Mater. Design 88, 1201-1209 (2015).
• [5] A. Lisiecki, Metals 5 (1), 54-69 (2015).
• [6] A. Śliwa, J. Mikuła, K. Golombek, T. Tański, W. Kwaśny, M. Bonek, Z. Brytan, Appl. Surf. Sei. 61, 149-152 (2016).
• [7] A. Zieliński, G. Golański, M. Sroka, Kovove Mater. 54 (1), 61-70 (2016).
• [8] J. Singh, A. Chauhan, Ceram. Int. 42 (1A), 56-81 (2016).
• [9] A. Zieliński, G. Golański, M. Sroka, J. Dobrzański, Estimation of long-term creep strength in austenitic power plant, Mater. Sei. Tech-Lond. 32 (8), 780-785.
• [10] A. Canakci, T. Varol, Powder Technol. 268, 72-79 (2014).
• [11] A. Zieliński, M. Miczka, M. Sroka, Mater. Sei. Tech-Lond. (2016), DOI: 10.1080/02670836.2016.1150242 (in press).
• [12] H. Brooks, S. Molony, Mater. Design 90, 276-283 (2016).
• [13] T. R. Prabhu, V. K. Varma, S. Vedantam, Wear, 309 (1-2), 247-255 (2014).
• [14] M. U. Uysal, M. Kremzer, Acta Phys. Pol. A 217 (4), 1355-1357 (2015).
• [15] A. Zieliński, G. Golański, M. Sroka, T. Tański, Mater. High Temp. 33 (1), 24-32 (2016).
• [16] C. Kruger, A. Mortensen, Compos. Part A-Appl. S, 66, 1-15 (2014).
• [17] I. Mobasherpour, A.A. Tofigh, M. Ebrahimi, Mater. Chem. Phys. 138 (2-3), 535-541 (2013)
• [18] B. Kaveendran, G. S. Wang, L. J. Huang, L. Geng, H. X. Peng,_ J. Alloy. Compd. 581, 16-22 (2013).
• [19] B. Tomiczek, M. Kujawa, G. Matula, M. Kremzer, T. Tański, L. A. Dobrzański, Materialwiss. Werkst. 46 (4-5), 368-376
• (2015).
• [20] H. Wang, X. Y Zhou, B. Long. H. Z. Liu, Mat. Sei. Eng. A-Struct. 582. 316-320 (2013).
• [21] A. Włodarczyk-Fligier. L A. Dobrzański, M. Adamiak, Mater. Sei. Forum 539. 895-900 (2007).
• [22] A. Zieliński, M. Miczka, B. Boryczko, M. Sroka, Arch. Civ. Mech. Eng. 4, 813-824 (2016).
• [23] T. Tański, K. Labisz, K. Lukaszkowicz, A. Śliwa, K. Golombek. Surf. Eng. 30 (12), 927-932 (2014).
• [24] A. Lisiecki. Proceedings of SPIE, Laser Technology, Applications of Lasers 8703 2013.
• [25] L. A. Dobrzański, A. Śliwa, W. Sitek, Surf. Eng. 5 ISEC. Seattle 2006.
• [26] A. Drygała. L A. Dobrzański, M. Szindler, M.M. Szindler. M.Prokopiuk vel Prokopowicz, E. Jonda. Int. J. Hydrogen Energ. 41(18), 7563-7567 (2016).
• [27] L. Blacha, K. Michałek, A. Smalcerz, Metalurgija 53 (4). 574 (2014).
• [28] A. Zieliński. G. Golański, M. Sroka, P. Skupień, Mater. High Temp. 33 (2), 154-163 (2016).
• [29] K. Drabczyk, G. Kulesza-Matlak, A. Drygała, M, Szindler, M. Lipiński. Sol. Energy 126, 14-21 (2016).

Uwagi

EN

This publication was financed by the Ministry of Science and Higher Education of Poland as the statutory financial grant of the Faculty of Mechanical Engineering SUT.