PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The effect of the addition of nanotubes upon the thermo-protective properties of the aramid-reinforced composite

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The aim of this article is to present findings concerning the thermo-protective research into ablative materials. The authors analysed the impact of the addition of carbon nanotubes upon the selected ablation properties, i.e. the ablation mass waste, average linear rate of ablation and the backside temperature of the specimens. The performed tests as well as the obtained findings allowed formulating a number of conclusions, which are useful in creating future composites. Composition of individual test samples; ablation testing; average relative ablation mass loss, depending on the volume share of carbon nanotubes; average ablation rate, depending on the volume share of carbon nanotubes; temperature of the rear surface of the insulating sample, depending on the volume share of carbon nanotubes; temperature inside the composite, depending on the volume share of carbon nanotubes; comparison of the temperature of ablation surface, temperature inside the composite and temperature on the rear surface of the wall of carbon nanotubes after the exposition to a heat flux are presented in the article.
Twórcy
autor
  • Polish Air Force Academy, Aeronautics Faculty Dywizjonu 303 Street 25, 08-521 Deblin, Poland tel.: + 48 261 517 427
autor
  • Polish Air Force Academy, Aeronautics Faculty Dywizjonu 303 Street 25, 08-521 Deblin, Poland tel.: + 48 261 517 427
  • Polish Air Force Academy, Aeronautics Faculty Dywizjonu 303 Street 25, 08-521 Deblin, Poland tel.: + 48 261 517 427
autor
  • Polish Air Force Academy, Aeronautics Faculty Dywizjonu 303 Street 25, 08-521 Deblin, Poland tel.: + 48 261 517 427
autor
  • Polish Air Force Academy, Aeronautics Faculty Dywizjonu 303 Street 25, 08-521 Deblin, Poland tel.: + 48 261 517 427
autor
  • Polish Air Force Academy, Aeronautics Faculty Dywizjonu 303 Street 25, 08-521 Deblin, Poland tel.: + 48 261 517 427
Bibliografia
  • [1] Badhe, Y., Balasubramanian, K., Novel hybrid ablative composites of resorcinol formaldehyde as thermal protection systems for re-entry vehicles, RSC Adv. 2014.
  • [2] Basavarajappa, S., Ellangovan, S., Dry sliding wear characteristics of glass–epoxy composite filled with silicon carbide and graphite particles, Wear, Vol. 296, pp. 491-496, 2012.
  • [3] Bian, L. P., Xiao, J. Y., Zeng, J. C., Xing, S. L., Yin, C. P., Microstructural interpretation of the ablative properties of phenolic–quartz hybrid fabric reinforced phenolic resin composites, Materials and Design, Vol. 62, pp. 424-429, 2014.
  • [4] Biswas, S., Kindo, S., Patnaik, A., Effect of Fiber Length on Mechanical Behavior of Coir Fiber Reinforced Epoxy composites, Fibers and Polymers, Vol. 12, pp. 73-78, 2011.
  • [5] Garoushi, S., Vallittu, P. K., Watts, D. C., Lassila, L. V. J., Effect of nanofiller fractions and temperature on polymerization shrinkage on glass fibre reinforced filling material, Dental Materials, Vol. 24, pp. 606-610, 2008.
  • [6] Kim, S. Y., Baek, S. J., Youn, J. R., New hybrid method for simultaneous improvement of tensile and impact properties of carbon fibre reinforced composites, Carbon, Vol. 49, pp. 5329-5338, 2011.
  • [7] Kucharczyk, W., Kształtowanie ablacyjnych właściwości termoochronnych polimerowych kompozytów proszkowych, Kompozyty, Vol. 8-3, pp. 274-279, 2008.
  • [8] Kucharczyk, W., Mazurkiewicz, A., Żurowski, W., Nowoczesne materiały konstrukcyjne wybrane zagadnienia, wydanie II, Politechnika Radomska, Radom 2010.
  • [9] Przybyłek, P., Opara, T., Kucharczyk, W., Możliwości zwiększenia odporności cieplnej rejestratorów lotniczych poprzez zastosowanie osłon z polimerowych kompozytów ablacyjnych, Journal of Aeronautica Integra, Vol. 2, (9), pp. 50-56, 2011.
  • [10] Sanoj, P., Kandasubramanian, B., Hybrid Carbon-Carbon Ablative Composites for Thermal Protection in Aerospace, Journal of Composites, 2014.
  • [11] Suresha, B., Ramesh, B. N., Subbaya, K. M., Kumar, B. N. R., Chandramohan, G., Influence of graphite filler on two-body abrasive wear behaviour of carbon fabric reinforced epoxy composites, Materials and Design, Vol. 31, pp. 1833-1841, 2010.
  • [12] Zhang, J., Chaisombat, K., He, S., Wang, C. H., Hybrid composite laminates reinforced with glass/carbon woven fabrics for lightweight load bearing structures, Materials and Design, Vol. 36, pp. 75-80, 2012.
  • [13] Zhou, S., Zhang, Q., Wua, C., Huang, J., Effect of carbon fibre reinforcement on the mechanical and tribological properties of polyamide6/polyphenylene sulfide composites, Materials and Design, Vol. 44, pp 493-499, 2013.
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-85b49e90-51ad-4576-a968-d372bf5d9aec
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.