PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Odporność warstw metalicznych stosowanych w systemach tekstronicznych na deformacje mechaniczne

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
EN
Resistance of metallic layers used in textronic systems to mechanical deformation
Języki publikacji
PL
Abstrakty
PL
W artykule zaprezentowano wyniki badań odporności warstw metalicznych Ag wytworzonych w procesie fizycznego osadzania próżniowego na deformacje mechaniczne. Warstwy wytworzone zostały na podłożu kompozytowym Cordura. Badano oporność warstw przewodzących na cykliczne naprężenia rozciągające, jako jedne z podstawowych odkształceń występujących w trakcie użytkowania tekstyliów z zaimplementowanymi systemami tekstronicznymi. Wyniki pomiarów wskazują na wysoką wytrzymałość mechaniczną takich warstw.
EN
In the article the authors present the results of tests concerning the resistance of Ag metallic layers produced in the process of physical vacuum deposition to mechanical deformation. The layers were made on Cordura composite substrate. Resistance of conductive layers to cyclic tensile stresses was investigated as one of the major deformations which appear during usage of textiles with implemented textronic systems. The results of the measurements indicate the high mechanical strength of such achieved layers.
Rocznik
Strony
111--114
Opis fizyczny
Bibliogr. 24 poz., fot., rys.
Twórcy
  • Politechnika Łódzka, Wydział Elektrotechniki, Elektroniki, Informatyki i Automatyki, Instytut Systemów Inżynierii Elektrycznej, ul. Stefanowskiego 18/22, 90-924 Łódź
autor
  • Politechnika Lubelska, Wydział Mechaniczny, Katedra Podstaw Inżynierii Produkcji, ul. Nadbystrzycka 36, 20-618 Lublin
autor
  • Politechnika Łódzka, Wydział Elektrotechniki, Elektroniki, Informatyki i Automatyki, Instytut Automatyki, ul. Stefanowskiego 18/22, 90-924 Łódź
autor
  • Politechnika Częstochowska ul. Armii Krajowej 17 42-200 Częstochowa
  • Wojskowy Instytut Medyczny, Warszawa
  • Instytut Nauk Technicznych i Lotnictwa, Państwowa Wyższa Szkoła Zawodowa w Chełmie ul. Pocztowa 54, 22-100 Chełm
Bibliografia
  • [1] Eichinger, G.F.; Baumann, K.; Martin, T.; Jones, M. Using a PCB Layout Tool to Create Embroidered Circuits. In Proceedings of the 11th IEEE International Symposium on Wearable Computers, Boston, MA, USA, 11–13 October 2007.
  • [2] Linz, T.; Gourmelon, L.; Langereis, G. Contactless EMG sensors embroidered onto textile. In Proceedings of the 4th International Workshop on Wearable and Implantable Body Sensor Networks (BSN 2007), Berlin, Germany, 26–28 March 2007; pp. 29–34.
  • [3] Chan, M.; Estève, D.; Fourniols, J.Y.; Escriba, C.; Campo, E. Smart wearable systems: Current status and future challenges. Artif. Intell. Med. 2012, 56, 137–156.
  • [4] Stoppa, M.; Chiolerio, A. Wearable electronics and smart textiles: A critical review. Sensors 2014, 14, 11957–11992.
  • [5] JaeHan, C.; Kim, Y.; Lee, K.; Chung, Y.C. Various wearable embroidery RFID tag antenna using electro-thread. In Proceedings of the 2008 IEEE Antennas and Propagation Society International Symposium, San Diego, CA, USA, 5–11 July 2008
  • [6] Korzeniewska E., Duraj A., Krawczyk A. Identyfication of sensor dysfunctions of organism by e-fiber monitoring, in Polish Przegląd Elektrotechniczny (Electrical Review) 2013 vol. 89, No.12, pp. 123-127
  • [7] Korzeniewska E., Duraj A., Koneczny C,, Krawczyk A., Thin film electrodes as elements of telemedicine systems. Przegląd Elektrotechniczny (Electrical Review) 2015; vol. 91, no 1, pp. 162-165
  • [8] Xuyuan Tao, Vladan Koncar, Tzu-Hao Huang, Chien-Lung Shen, , Ya-Chi Ko, Gwo-Tsuen Jou : How to Make Reliable, Washable, and Wearable Textronic Devices, Sensors 2017, 17, 673; doi:10.3390/s17040673
  • [9] Wosiak A., Zakrzewska D.: On Integrating Clustering and Statistical Analysis for Supporting Cardiovascular Disease Diagnosis, Proceedings of the 2015 Federated Conference on Computer Science and Information Systems, FedCSIS 2015, Article number 2015F151, Pages 303-310
  • [10] Wiak, S., Drzymała, P., Welfle, H.: Using ORACLE tools to generate multidimensional model in warehouse Przegląd Elektrotechniczny (Electrical Review) 2012; vol. 88, no 1A, pp. 257-262
  • [11] Ziaja J; ZnO thin film deposition with pulsed magnetron sputtering; Przegląd Elektrotechniczny (Electrical Review) 2007; vol. 83, no 11, pp. 235-239
  • [12] Stempien Z.; Kozicki M.; Pawlak R.; Korzeniewska E.; Owczarek G.; Poscik A.; Sajna D.; Ammonia gas sensors inkjet printed on textile substrates Proceedings of IEEE Sensors article number 7808457 doi 10.1109/ICSENS.2016.7808457
  • [13] Pawlak R., Korzeniewska E., Koneczny C., Hałgas B.., Properties of conductive structures produced by PVD method on a textile composite, Autex Research Journal, Vol. 17, No 3, September 2017, DOI: 10.1515/aut-2017-0015
  • [14] Głowacz A., Głowacz Z. Glowacz, J. Kozik: Early fault diagnosis of bearing and stator faults of the single-phase induction motor using acoustic signals, Measurement, vol. 113, (2018) 1-9.
  • [15] Glowacz A., Glowacz Z.; Diagnosis of stator faults of the singlephase induction motor using acoustic signals By: APPLIED ACOUSTICS, vol. 117 Part: A (2017) 20-27
  • [16] Jozwik, J; Czwarnowski M.: Angular positioning accuracy of rotary table and repeatability of five-axis machining centre DMU 65 MonoBlock. Advances in Science and Technology - Research Journal, Vol. 9 Issue: 28 (2015) 89-95
  • [17] Jozwik J. Semotiuk L. Kuric I.: Diagnostic of CNC lathe with QC 20 Ballbar system Advances in Science and Technology - Research Journal, Vol. 9 Issue: 28 (2015) 96-102
  • [18] Mika D., Jozwik J.: Normative measurements of noise at CNC machines work stations. Advances in Science and Technology - Research Journal, Vol. 10 Issue: 30 (2016) 138-143
  • [19] Feldshtein, E. Jozwik, J: Legutko, S: The influence of the conditions of emulsion mist formation on the surface roughness of AISI 1045 steel after finish turning. Advances in Science and Technology - Research Journal, vol. 10, Issue: 30 (2016) 144- 149
  • [20] Krolczyk G.M., Nieslony P., Krolczyk J.B., Samardzic I., Legutko S., Hloch S., Barrans S., Maruda R.W.; Influence of argon pollution on the weld Surface Morphology, Measurement, vol. 70 (2015) 203 – 213
  • [21] Nieslony P., Krolczyk G.M., Zak K., Maruda R.W., Legutko S.; Comparative assessment of the mechanical and electromagnetic surfaces of explosively clad Ti-steel plates after drilling process, Precision Engineering, vol. 47 (2017) 104 - 110
  • [22] Kasprzyk L., Bednarek K.; Elektromagnetyzm a zagadnienia gromadzenia energii Przegląd Elektrotechniczny (Electrical Review) 2014; vol. 90, no 12, pp. 221-224 doi:10.12915/pe.2014.12.55
  • [23] Korzeniewska E., Jakubas A., Measurement of surface resistance of thin layers of different shapes produced on flexible substrates, in Polish Przegląd Elektrotechniczny (Electrical Review) 2014 vol.90, no. 12, Pages 233-236
  • [24] Gocławski J., Sekulska-Nalewajko J, Korzeniewska E., Piekarska A.; The use of optical coherence tomography for the evaluation of textural changes of grapes exposed to pulsed electric field, Computers and Electronics in Agriculture 142 (2017) 29–40
Uwagi
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-85645a4c-6658-4583-91ed-c4a7326a5030
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.