PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Phosphor conversion for WLEDs: YBO3: Ce3+, Tb3+ and its effects on the luminous intensity and chromatic properties of dual-layer WLED model

Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Yttrium borate phosphor co-doping Ce3+, Tb3+ions (YBO3: Ce3+, Tb3+) is fabricated using solid state reaction, and then its luminescence is investigated through the computational energy transfer process. Under excited near-UV light, this YBO3: Ce3+, Tb3+ phosphor exhibits strong absorption with broad and sharp emission bands due to the 4f – 5d and 5d – 4f transitions of Ce3+ ions and the 4f – 4f transition of Tb3+ ions, respectively. The phosphor’s emission chromaticity could be tunable by adjusting the concentration of doping ions. With 15% Tb3+ and 3% Ce3+ in the composition, the phosphor can gain maximum 76.7% external quantum efficacy. The phosphor is proposed for utilization in the phosphor package of white light-emitting diodes (WLEDs) to enhance their lighting performances. The findings point out that by modifying YBO3: Ce3+, Tb3+ concentration (5% – 10%), improvements in luminous intensities, color consistency, and color rendering indices can be observed. The higher concentration (10%) of YBO3: Ce3+, Tb3+ is more advantageous to the luminous flux and chromatic uniformity in cases of 4000 K and 5000 K WLEDs, while lower (5%) concentration greatly benefits those properties in the case of 3000 K WLED. Regardless of CCTs, the WLEDs show a reduction in chromatic reproduction efficiency with the increasing concentration of YBO3: Ce3+, Tb3+ . Hence, this green phosphor could be a good material for high-luminescence WLED, yet the modification of phosphor concentration is advisable if the simultaneous good chromaticity is desired.
Wydawca
Rocznik
Strony
105--113
Opis fizyczny
Bibliogr. 26 poz., rys.
Twórcy
  • Faculty of Basic Sciences, Vinh Long University of Technology Education, Vinh Long Province, Vietnam
  • Faculty of Engineering and Technology, Nguyen Tat Thanh University, Ho Chi Minh City, Vietnam
  • Faculty of Electrical and Electronics Engineering, Nha Trang University, Nha Trang City, Vietnam
autor
  • Department of Electrical Engineering, National Kaohsiung University of Science and Technology, Kaohsiung, Taiwa
  • Faculty of Electrical and Electronics Engineering, Ton Duc Thang University, Ho Chi Minh City, Vietnam
Bibliografia
  • [1] G. -F. Luo, N. T. P. Loan, L. V. Tho, N. D. Q. Anh, and H. -Y. Lee, “Enhancement of color quality and luminous flux for remote-phosphor LEDs with red-emitting CaMgSi2O6:Eu2+,Mn2+,” Materials Science-Poland 38, 409 – 415 (2020).
  • [2] Z. Zhang and W. Yang, “Tunable photoluminescence in Ba1-xSrxSi3O4N2: Eu2+/Ce3+, Li+ solid solution phosphors induced by linear structural evolution,” Opt. Mater. Express 9, 1922–1932 (2019).
  • [3] Y. Sun, C. Zhang, Y. Yang, H. Ma, and Y. Sun, “Improving the Color Gamut of a Liquid-crystal Display by Using a Bandpass Filter,” Curr. Opt. Photon. 3, 590–596 (2019).
  • [4] S. Zhao, Q. Mo, W. Cai, H. Wang, and Z. Zang, “Inorganic lead-free cesium copper chlorine nanocrystal for highly efficient and stable warm white light-emitting diodes,” Photon. Res. 9, 187–192 (2021).
  • [5] J. Li, D. Han, J. Zeng, J. Deng, N. Hu, and J. Yang, “Multi-channel surface plasmon resonance biosensor using prism-based wavelength interrogation,” Opt. Express 28, 14007–14017 (2020).
  • [6] X. Guo and N. Chi, “Superposed 32QAM Constellation Design for 2 × 2 Spatial Multiplexing MIMO VLC Systems,” J. Lightwave Technol. 38, 1702–1711 (2020).
  • [7] Y. Yang, C. Chen, P. Du, X. Deng, J. Luo, W. Zhong, and L. Chen, “Low complexity OFDM VLC system enabled by spatial summing modulation,” Opt. Express 27, 30788–30795 (2019).
  • [8] R. Fan, S. Fang, C. Liang, Z. Liang, and H. Zhong, “Controllable one-step doping synthesis for the white-light emission of cesium copper iodide perovskites,” Photon. Res. 9, 694–700 (2021).
  • [9] Y. Fei and J. Zhang, “Luminescence properties of KBaYSi2O7:Ce/Eu-Tb phosphors for multifunctional applications,” Appl. Opt. 58, 4740–4745 (2019).
  • [10] A. Ahmad, A. Kumar, V. Dubey, A. Butola, B. S. Ahluwalia, and D. S. Mehta, “Characterization of color cross-talk of CCD detectors and its influence in multispectral quantitative phase imaging,” Opt. Express 27, 4572–4589 (2019).
  • [11] F. Jiang, J. Zhang, L. Xu, J. Ding, G. Wang, X. Wu, X. Wang, C. Mo, Z. Quan, X. Guo, C. Zheng, S. Pan, and J. Liu, “Efficient InGaN-based yellow-light-emitting diodes,” Photon. Res. 7, 144–148 (2019).
  • [12] Y. Li, J. Lan, W. Wang, Y. Zheng, W. Xie, X. Tang, D. Kong, Y. Xia, Z. Lan, R. Li, X. He, and G. Li, “395 nm GaN-based near-ultraviolet light-emitting diodes on Si substrates with a high wall-plug efficiency of 52.0%@350 mA,” Opt. Express 27, 7447–7457 (2019).
  • [13] Y. Wang, G. Xu, S. Xiong, and G. Wu, “Large-field step-structure surface measurement using a femtosecond laser,” Opt. Express 28, 22946–22961 (2020).
  • [14] M. Hu, J. Luo, S. Li, J. Liu, J. Li, Z. Tan, G. Niu, Z. Wang, and J. Tang, “Broadband emission of double perovskite Cs2Na0.4Ag0.6In0.995Bi0.005Cl6:Mn2+ for single-phosphor white-light-emitting diodes,” Opt. Lett. 44, 4757–4760 (2019).
  • [15] Y. Chang, C. Liu, Z. Pei, S. Lee, Y. Lai, P. Han, H. Shih, and W. Cheng, “New scheme of LiDAR-embedded smart laser headlight for autonomous vehicles,” Opt. Express 27, A1481–A1489 (2019).
  • [16] B. Swiatczak, M. Feldkaemper, and F. Schaeffel, “Changes in fundus reflectivity during myopia development in chickens,” Biomed. Opt. Express 10, 1822–1840 (2019).
  • [17] Y. Shi, S. Ye, J. Yu, H. Liao, J. Liu, and D. Wang, “Simultaneous energy transfer from molecular-like silver nanoclusters to Sm3+/Ln3+ (Ln=Eu or Tb) in glass under UV excitation,” Opt. Express 27, 38159–38167 (2019).
  • [18] L. Zhang, C. Wang, Y. Jin, and T. Xu, “Wide color gamut white light-emitting diodes based on two-dimensional semiconductor nanoplatelets,” Opt. Express 30, 3719–3728 (2022).
  • [19] J. Lui, A. M. Vegni, L. Colace, A. Neri, and C. Menon, “Preliminary design and characterization of a low-cost and low-power visible light positioning system,” Appl. Opt. 58, 7181–7188 (2019).
  • [20] P. Kumar and N. K. Nishchal, “Enhanced exclusive-OR and quick response code-based image encryption through incoherent illumination,” Appl. Opt. 58, 1408–1412 (2019).
  • [21] S. Gong, R. Wu, S. Yang, L. Wu, M. Zhang, Q. Han, and W. Wu, “Tuning the luminous properties and optical thermometry of Cs2SnCl6 phosphor microcrystals via Bi and Sb codoping,” Photon. Res. 9, 2182–2189 (2021).
  • [22] B. Yu, Z. Lu, G. Liang, Y. Yuan, H. Wang, J. He, and S. Yang, “Luminous efficacy enhancement for LED lamps using highly reflective quantum dot-based photoluminescent films,” Opt. Express 29, 29007–29020 (2021).
  • [23] C. Huang, Y. Chang, L. Han, F. Chen, S. Li, and J. Hong, “Bandwidth correction of spectral measurement based on Levenberg–Marquardt algorithm with improved Tikhonov regularization,” Appl. Opt. 58, 2166–2173 (2019).
  • [24] E. L. Francois, J. Herrnsdorf, J. J. D. McKendry, L. Broadbent, G. Wright, M. D. Dawson, and M. J. Strain, “Synchronization-free top-down illumination photometric stereo imaging using light-emitting diodes and a mobile device,” Opt. Express 29, 1502–1515 (2021).
  • [25] Q. Liu, Y. Liu, M. R. Pointer, Z. Huang, X. Wu, Z. Chen, and M. R. Luo, “Color discrimination metric based on the neutrality of lighting and hue transposition quantification,” Opt. Lett. 45, 6062–6065 (2020).
  • [26] H. Q. T. Bui, R. T. Velpula, B. Jian, M. R. Philip, H. D. Tong, T. R. Lenka, and H. P. T. Nguyen, “High-performance nanowire ultraviolet light-emitting diodes with potassium hydroxide and ammonium sulfide surface passivation,” Appl. Opt. 59, 7352–7356 (2020).
Uwagi
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-85600dcc-fadd-4145-9448-3c54f6dcc184
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.