PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!
Tytuł artykułu

Influence of Technology Process on Responsiveness of Footwear Nonwovens

Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Nonwovens represent a part of technical textiles that are used for clothing (“cloth tech”). Nonwovens are also used in the footwear industry mainly for functional purposes, where the aesthetic properties are not of great importance. They are mainly used for support and reinforcement of footwear. All three groups of textiles are used for footwear, i.e. woven fabrics, knitted fabrics and nonwovens that are produced directly from fibres, yarns or threads mainly from chemical fibres and in a small proportion from natural fibres. Footwear textiles need to have good mechanical properties (at compressive loading), abrasion resistance, permeability properties and heat resistance. These properties are in close connection with the nonwoven structure or composite materials. The basic intention of the presented research was to analyse the influence of the technology process on nonwovens for footwear responsiveness. Analysed footwear nonwovens in the presented research were on one side coated but on the other side consisted of a two-layer laminate. For this purpose, two different technological processes were used (coating and lamination). The results of the presented research showed that laminated samples express higher elastic recovery at compressive loading than coated samples. The treatment does not have an important influence on elastic recovery at compressive loading. Laminated samples express higher water permeability and lower absorption of water than coated samples, even after 24 hours of treatment in distilled water and compressive loading. The treatment of specimens in distilled water for 24 hours and compressive load of 789.6 N does not have an important influence on elastic recovery at compressive loading, water vapour permeability, air permeability and absorption of analysed samples. Air permeability could not be measured on coated samples.
Rocznik
Strony
539--551
Opis fizyczny
Bibliogr. 26 poz.
Twórcy
  • University of Ljubljana, Faculty of Natural Sciences and Engineering, Department of Textiles, Graphic Arts and Design, Ljubljana, Slovenia, Snežniska 5, SI-1000 Ljubljana tel.: +386 1 2003220
autor
  • University of Ljubljana, Faculty of Natural Sciences and Engineering, Department of Textiles, Graphic Arts and Design, Ljubljana, Slovenia, Snežniska 5, SI-1000 Ljubljana
  • Alpina d. o. o., Strojarska 2, 4226 Žiri, Slovenia
Bibliografia
  • [1] Shishoo, R. (2005), Woodhead publishing in textiles: textiles in sport. Cambridge, Woodhead publishing limited, 70–171.
  • [2] Gong, R. H. (2011), Specialist yarn and fabric structures: developments and applications, Cambridge, Woodhead publishing limited, 109–116.
  • [3] Fung, W. (2002), Coated and laminated textiles. Cambridge, Woodhead publishing limited, 33–150.
  • [4] Li, J. H., Hsieh, J. C., Lou, C. W., Hsieh, C. T., Pan, Y. J., Hsing, W. H. and Lin, J.H. (2016), Needle-punched thermally-bonded eco-friendly nonwoven geotextiles : Functional properties, Materials Letters, 183, 77–80.
  • [5] Bratchenya L. A., Tolochkova, O. N. and Lebedeva, M. V. (2015), Creation of nonwoven shoe materials with improved hygienic properties, Fibre Chemistry, 43 (5), 369–371.
  • [6] Messaoud, M., Vaesken, A., Aneja, A., Schacher L., Adolphe. D., Schaffhauser, J. B., and Strehle, P. (2015), Physical and mechanical characterizations of recyclable insole product based on new 3D textile structure developed by the use of a patented vertical-lapping process, Journal of Industrial Textiles, 44 (4 ), 497–512.
  • [7] Kinge, A. P., Landage, S. M. and Wasif, A. I. (2013), Nonwoven for artificial leather, International Journal of Advanced Research in Engineering and Applied Sciences, 2 (2), 18–31.
  • [8] Debnath, S., Madhousoothanan, M. (2011), Studies on compression properties of polyester needle-punched nonwoven fabrics under dry and wet conditions, Journal of Industrial Textiles, 41 (4), 292–308.
  • [9] Shabaridharan, K., Das, A. (2013), Study on thermal and evaporative resistances of multilayered fabric ensembles, Journal of The Textile Institute, 104 (10), 1025–1041.
  • [10] Ventura, V., Ardanuy, M., Capdevila, X., Cano, F. and Tornero, J. A. (2014), Effects of needling parameters on some structural and physical-mechanical properties of needle-punched nonwovens, Journal of The Textile Institute, 105 (10), 1065–1075.
  • [11] Aksoy, A., Kaplan, S. (2013), Production and performance analysis of an antibacterial foot sweat pad, Fibers and Polymers, 14 (2), 316–323.
  • [12] Saxena, M, Pappu, A., Haque, R. and Sharma, A. (2011), Sisal fiber based polymer composites and their applications. Cellulose fibers: bio- and nano-polymer composites, Springer Link, 589–651.
  • [13] Foulk, J., Akin, D., Dodd, R. and Ulven, C. (2011), Production of flax fibers for biocomposites. cellulose fibers: bio- and nano-polymer composites, Springer Link, 61–95.
  • [14] Ganesan, P., Karthik, T. (2016), Development of acoustic nonwoven materials from kapok and milkweed fibres, The Journal of The Textile Institute, 107 (4), 477–482.
  • [15] Phongam, N., Dangtungee, R. and Siengchin, S. (2015), Comparative studies on the mechanical properties of nonwoven- and woven-flax-fiber-reinforced poly(butylene adipate-Co-terephthalate)-based composite laminates, Mechanics of Composite Materials, 51 (1), 17–24.
  • [16] Mishra, R., Behera, B. and Militky, J. (2014), Recycling of textile waste into green composites: performance characterization, Polymer Composites, 35, 1960–1967.
  • [17] INDA – Leading Global Trade Association of the Nonwovens Industry. http://www.inda.org/about-nonwovens/nonwoven-markets/apparel/.
  • [18] Zhu, G., Kremenakova, D. and Wang, Y. (2015) Study on the thermal property of highly porous nonwoven fabrics, Industria textila, 66 (2), 74–79.
  • [19] Dedov, A. V. (2004), Nonwoven material with Low density and high mechanical strength, Fibre Chemistry, 36 (2), 126–128.
  • [20] Standard Test Method for Impact Attenuation of Athletic Shoe Cushioning Systems and Materials (2013), ASTM F1976 – 13, 6 p.
  • [21] Standard Test Methods for Water Vapor Transmission of Materials (2016), ASTM E96:E96M, 8 p.
  • [22] Textiles – Determination of the permeability of fabrics to air (1995), ISO 9237, 5 p.
  • [23] Water Repellency: Static Absorption Test (1983), AATCC 21, 4 p.
  • [24] Jakšić, D. and Jakšić, N. (2004), The porosity of masks used in medicine, Tekstilec, 47 (9–12), 301–304
  • [25] Jakšić, D. and Jakšić, N. (2007), Assessment of Porosity of Flat Textile Fabrics, Textile Research Journal, 77 (2), 105–110.
  • [26] Nagla, J. R. (2014), Statistics for Textile Engineers, New Delhi : Woodhead publishing, 5–90.
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-8558e3ba-f8ff-4231-951e-c466ac6291f4
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.