Distribution of information and documentation for the manufacturing processes of the high-variety products – case study

• Autorzy: Mleczko J. , Podhora P , Patka J
• Języki publikacji: EN

Abstrakty

EN

In the last years the researches in engineering have moved towards customer-oriented manufacturing. The individual customer's require-ments are very important for the company's activities. It results high-variety production. High-variety production like mass customization is facing the challenge of effective variety management. Applying methods of mass customization to the empirical process can improve product development process efficiency and reduce time and cost. The manufactu-ring process requires documentation of the production. Very often, the documentation process and the time of its formation is limited. The article includes an analysis of the modern manufacturing systems and answering the question: how is it possible to produce without having a docume-ntation in paper form. The presented solution is used during the high-variety products manufactured in the SMEs. The method was validated in the conditions of best practice high-variety production.

Słowa kluczowe

EN

EDI electronic documentation; mass customization; product family; industrial engineering

• Wydawca: Polskie Towarzystwo Promocji Wiedzy ; Lublin University of Technology
• Czasopismo: Applied Computer Science
• Rocznik: 2013
• Tom: Vol. 9, no 2
• Strony: 20--33
• Opis fizyczny: Bibliogr. 32 poz., fig.

Twórcy

autor

Mleczko J.

• University of Bielsko-Biała, Department of Industrial Engineering, Willowa 2, 43-309 Bielsko-Biała, Poland, tel.: [phone]

autor

Podhora P

• University of Žilina, Mechanical Faculty, Department of Industrial Engineering, Univerzitná 1, 010 26 Žilina, Slovak Republic, tel.: [phone]

autor

Patka J

• University of Žilina, Mechanical Faculty, Department of Industrial Engineering, Univerzitná 1, 010 26 Žilina, Slovak Republic, tel.: [phone]

Bibliografia

• [1] Ball A., Ding L., Patel M.: An approach to accessing product data across system and software revisions. Advanced Engineering Informatics, vol. 22, 2008, p. 222-235.
• [2] Banaszak Z., Kłos S., Mleczko J.: Zintegrowane Systemy Zarządzania. PWE Warszawa, 2011.
• [3] Da Silveira G., Borenstein D., Fogliatto F. S.: Mass customization: Literature review and research directions. Int. J. Production Economics, vol. 72, 2001, p. 1-13.
• [4] Duda J.: Computer integrated development of processes and assembly systems. Computer aided mechanical engineering, vol. 1, 2011, p. 99-106.
• [5] Djassemi M., Sena J. A.: The Paperless Factory: A Review of Issues and Technologies. “IJCSNS International Journal of Computer Science and Network Security”, vol. 6/12, 2006.
• [6] Eynard B., Gallet T., Nowak P., Roucoules L.: UML based specifications of PDM product structure and workflow. Computers in Industry, vol. 55, 2004, p. 301-316.
• [7] Huffman C., Kahn B.: Variety for sale: Mass customization or mass confusion, Journal of Retailing, vol. 74, 1998, p. 491-513.
• [8] Yao A. C., Carlson J. G.: The impact of real-time data communication on inventory management. International Journal of Production Economics, vol. 49 (1-3), 1999, p. 213-219.
• [9] Kumar A.: Mass customization: manufacturing issues and taxonomic analyses. Int J Flex Manuf Syst, vol. 19, 2007, p. 625-629.
• [10] Li W. D., Fuh J.Y.H., Wong Y.S.: An internet-enabled integration system for co-design and concurrent engineerings. Computers in Industry, vol. 55(1), 2003, p. 87-103.
• [11] Maccarthy B., Brabazon P. G., Bramham J.: Fundamental modes of operation for mass customization. Int. J. Production Economics, vol. 85, 2003, p. 289-304.
• [12] Matta A., Tolio T., Karaesmen F., Dallery Y.: An integrated approach for the configuration of automated manufacturing systems. Robotics and Computer Integrated Manufacturing, vol. 17, 2001, p. 19-26.
• [13] Mleczko J.: Komputerowe wspomaganie planowania przebiegów procesów produkcyjnych. Wydawnictwo Fundacji Centrum Nowych Technologii, Bielsko-Biała, 2008.
• [14] Mleczko J.: Implementacja wielowariantowych struktur wyrobów w informatycznych systemach wspomagania wytwarzania. Metody i techniki zarządzania w inżynierii produkcji – zbiór prac, Bielsko-Biała, 2009, p. 259-272.
• [15] Mleczko J.: Computer aided confirming orders of configurable products – case study of data preparation. Applied Computer Science, vol.6 (1), 2010, p. 42-53.
• [16] Mleczko J.: Data of configurable products for digital factory and ERP systems. Digital factory management methods and techniques in engineering production, vol. 5, 2011, p. 101-119.
• [17] Mleczko J.: Przepływ danych w zarządzaniu operacyjnym wyrobów wariantowych. Zarządzanie Przedsiębiorstwem, vol. 2, 2011.
• [18] Mleczko J.: Product family manufacturing based on dynamic classification. Management and Production Engineering Review – Kwartalnik Komitetu Inżynierii Produkcji PAN, vol. 2 (2), 2011, p. 29-38.
• [19] Mleczko J.: Komputerowo wspomagane zarządzanie procesami w organizacji. Wydawnictwo Naukowe ATH, Bielsko-Biała, 2012.
• [20] Mleczko J.: Wykorzystanie elektronicznej formy dokumentacji wytwarzania w jednostkowej i małoseryjnej produkcji wyrobów. Zarządzanie Przedsiębiorstwem, vol. 2, 2011, p. 23-34.
• [21] Mleczko J.: Cost of products manufactured in organizational similar groups – case study. Advances in Manufacturing Science and Technology (Postępy Technologii Maszyn), vol. 37 (1), 2013.
• [22] Porter J. D., Kim D. S., Paotrakool K.: Performance evaluation of heterogeneous wireless local area networks. Computers and Industrial Engineering, vol. 48, 2005, p. 251-271.
• [23] Pine B.J.: Mass Customization: The New Frontier in Business Competition. Harvard Business School Press, Boston, 1993.
• [24] Spring M., Dalrymple J. F.: Product customization and manufacturing strategy. International Journal of Operations and Production Management, vol. 20 (4), 2000, p. 441-467.
• [25] Tien J. M.: Manufacturing and services: From mass production to mass customization. J Syst Sci Syst Eng, vol. 20 (2), 2011, p. 129-154.
• [26] Tralix M.T.: From mass production to mass customization. Journal of Textile and Apparel, Technology and Management, vol. 1, 2001, issue 2.
• [27] Zhang L., Lee C., Xu Q.: Towards product customization: An integrated order fulfillment system. Computers in Industry 61, 2010, p. 213-222.
• [28] Zhou Ch., Lin Z., Liu C.: Customer-driven product configuration optimization for assemble-to-order manufacturing enterprises. International Journal of Advanced Manufacturing Technology, vol. 38, 2008, p.185-194.
• [29] Slamková E., Dulina Ľ., Tabaková M.: Ergonómia v priemysle. 1st edition. Žilina: Georg, 2010, p. 262.
• [30] Mičieta B., Dulina Ľ., Smutná M.: New Approach of Ergonomics Workplace Design. The 22nd International DAAAM Symposium. Vienna: DAAAM International Vienna, 2011, p. 303.
• [31] Gregor M., Medvecký Š.: Žilina University Concept of Digital Factory. Komunikacie. Vol. 10, Issue 2, 2008, p. 60-66.
• [32] Gregor M., Štefánik A., Hromada J.: Lean Manufacturing Systems Optimisation Supported by Metamodelling. IFIP International Federation for Information Processing, vol. 257, 2008, p. 175-183.