Powiadomienia systemowe
- Sesja wygasła!
- Sesja wygasła!
Tytuł artykułu
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Effect of different Sn contents on combustion synthesis of Ti2SnC was studied using elemental Ti, Sn, C and TiC powders as raw materials in the Ti–Sn–C and Ti–Sn–C–TiC system, in which the molar ratio of Ti/C was set as 2:1. The reaction mechanism for the formation of Ti2SnC was also investigated. The results showed that the amount of Ti2SnC in combustion products firstly increased with increasing of Sn content (0.6 to 0.8 mol), and then decreased with further increasing of Sn content (1.0 to 1.2 mol). Upon addition of 15 % TiC instead of Ti and C, the optimum addition of Sn decreased to 0.7 mol and a higher purity of Ti2SnC was obtained. The Ti2SnC powders were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD).
Słowa kluczowe
Wydawca
Czasopismo
Rocznik
Tom
Strony
696--701
Opis fizyczny
Bibliogr. 15 poz., rys., wykr.
Twórcy
autor
- College of Science, Honghe University, Mengzi 661100, China
autor
- College of Science, Honghe University, Mengzi 661100, China
autor
- Yunnan Tin Company Limited, Gejiu 661000, China
autor
- College of Science, Honghe University, Mengzi 661100, China
autor
- College of Science, Honghe University, Mengzi 661100, China
autor
- College of Science, Honghe University, Mengzi 661100, China
Bibliografia
- [1] JESCHKO W., NOWOTNY H., BENESOVSKY F., Monatsh. Chem., 94 (1963), 672.
- [2] BARSOUM M.W, YAROSCHUK G., TYAGI S., Scripta Mater., 37 (1997), 1583.
- [3] EL-RAGHY T., YAROSCHUK G., BARSOUM M.W., J. Eur. Ceram. Soc., 20 (14 – 15) (2000), 2619.
- [4] DONG H.Y., YAN C.K., CHEN S.Q., ZHOU Y.C., J. Mater. Chem., 5 (2001), 1402.
- [5] BARSOUM M.W., BRODKIN D., EL-RAGHY T., Scripta Mater., 36 (1997), 535.
- [6] LI S.B., BEI G.P., ZHAI H.X., ZHOU Y., LI C.W., Mat. Sci. Eng. A-Struct., 457 (2007), 282.
- [7] BEI G.P., LI S.B., ZHAI H.X., ZHOU Y., Mater. Res. Bull., 42 (2007), 1995.
- [8] LI S.B., BEI G.P., ZHAI H.X., ZHOU Y., Mater. Lett., 60 (2006), 3530.
- [9] YEH C.L., KUO C.W., J. Alloy. Compd., 502 (2010), 461.
- [10] LI Y.X., BAI P.K., LIU B., J. Alloy. Compd., 509 (2011), 328.
- [11] LI Y.X., BAI P.K., Int. J. Refract. Met., 29 (2011), 751
- [12] VINCENT H., VINCENT C., MENTZEN B.F., PASTOR S., BOUIX J., Mat. Sci. Eng. A-Struct., 256 (1998), 83
- [13] YANG S.L., SUN Z.M., HASHIMOTO H., ABE T., J. Alloy. Compd., 358 (2003), 168
- [14] HARTMAN P., PERDOK W.G., Acta Crystallogr., 8 (1955), 49
- [15] LI S.B., BEI G.P., XIANG W.H., ZHAI H.X., ZHOU Y., ZHANG Z.L., LI C.W., Mater. Res. Bull., 44 (2009), 966.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-848f6ade-e4b9-481f-8ecd-1eb0cebdcf34