PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Technological aspects of orthophotomap generation in rapid mapping mode

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The article presents the technical aspects of Digital Elevation Model (DEM) and Digital Surface Model (DSM) built on the basic of Very High Resolution (VHR) data to create orthophotomap in a rapid mapping mode. The final part of the paper is accuracy assessment of orthophotomap built on the same elevation models which were used in a rapid mapping way. In the article were using aerial photography’s gained from digital camera UltraCam Xp by Vexcel. The spatial resolution of this images is 0.10 m. Example data of Gazoport in Świnoujście were processed using photogrammetry software Agisoft PhotoScan. The usefulness of both DSM and orthophotomap products were achieved by cross calculating mean errors. Orthophotomap created in a rapid mapping way, with minimum set of images, was built across using Ground Control Points (GCP). The source of GCP points was the Polish Spatial Data Infrastructure Geoportal. Check points were measured using both geoportal and Global Navigation Satellite System (GNSS) in the Real Time Kinematic (RTK) mode.
Rocznik
Strony
48--51
Opis fizyczny
Bibliogr. 7 poz., rys., tab.
Twórcy
autor
  • Maritime University of Szczecin 70-500 Szczecin, ul. Wały Chrobrego 1–2
autor
  • Maritime University of Szczecin 70-500 Szczecin, ul. Wały Chrobrego 1–2
autor
  • Maritime University of Szczecin 70-500 Szczecin, ul. Wały Chrobrego 1–2
  • Maritime University of Szczecin 70-500 Szczecin, ul. Wały Chrobrego 1–2
autor
  • Maritime University of Szczecin 70-500 Szczecin, ul. Wały Chrobrego 1–2
Bibliografia
  • 1. HARWIN S., LUCIEER A.: Assessing the Accuracy of Georeferenced Point Clouds Produced via Multi-View Stereopsis from Unmanned Aerial Vehicle (UAV) Imagery. Remote Sensing 4, 2012, 1573–1599.
  • 2. Teledetekcja wykorzystanie zdalnej informacji. Sanecki J. (Edit.), Stępień G., Konieczny J., Niebylski J., Klewski A. – Wydawnictwo AM w Szczecinie, 2015 (put into print).
  • 3. http://imageit.pl/doc/Automatyzacja%20R.Preuss.pdf (access on 31.01.2015).
  • 4. GREIWEA A. GEHRKEA R., SPRECKELSB V. SCHLIENKAMPB A.: Aspects of DEM generation from UAS imagery. International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Volume XL- 1/W2 UAV-g2013, Rostock, Germany, 2013.
  • 5. KLEWSKI A., SANECKI J., BECZKOWSKI K., POKONIECZNY K., STĘPIEŃ G.: The usage of DEM to create the 3D cadastre. Scientical Journals Maritime University of Szczecin 33(105), 2013, 86–90.
  • 6. SANECKI J., PABISIAK P., BAUER R., PTAK A., STĘPIEŃ G.: Wykorzystanie NMT w analizie obszarów zalewowych. Zeszyty Naukowe Politechniki Rzeszowskiej 283 (zeszyt 59 (nr 1/2012/II)), 2012, 287–293.
  • 7. www.mggpaero.com (access on 01.12.2010 r.).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-84513155-593f-49b5-82bb-8dfadaeee069
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.