Carbides Analysis of the High Strength and Low Density Fe-Mn-Al-Si Steel

• Autorzy: Sozańska-Jędrasik L. , Mazurkiewicz J. , Borek W. , Matus K.

Identyfikatory

DOI

10.24425/118937

• Języki publikacji: EN

Abstrakty

EN

The work presents the results of investigations into the structure and phase composition of newly developed high manganese steels of the X98MnAlSiNbTi24-11 and X105MnAlSi24-11 type. The average density of such steels is 6.67 g/cm³, which is 15% lower as compared to typical structural steels. An analysis of phase composition and structure allows to conclude that the investigated steels feature an austenitic γ-Fe(Mn,Al,C) structure with uniformly distributed and elongated α-Fe(Mn,Al) ferrite grains on the boundaries of austenite grains and carbides. Examinations by diffraction of back scattered electrons (EBSD) allow to conclude that high-angle boundaries dominate in such steels, having significant influence on mechanical properties. Three types of carbides with differentiated chemical composition and size were identified in steel X98MnAlSiNbTi24-11 with scanning and transmission electron microscopy. κ-(Fe,Mn)₃AlC carbides, having a regular, face-centered cubic lattice (fcc), were identified in austenite. Transmission electron microscopy examinations have enabled to identify M₇C₃-type carbide in ferrite. Nb- and Ti-based complex carbides were identified in steel X98MnAlSiNbTi24-11, both, in ferrite and austenite. (NbTi)C₂ carbide precipitates were confirmed in an X-ray qualitative phase analysis. The size of the above-mentioned carbides is within several to several dozens of μm. An X-ray qualitative phase analysis has confirmed the precipitates of M₇C₃ carbides in both steels.

Słowa kluczowe

EN

high manganese steels; triplex; microstructure; isolates of carbide; carbides κ; M7C3; EBSD

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2018
• Tom: Vol. 63, iss. 1
• Strony: 265--276
• Opis fizyczny: Bibliogr. 44 poz., rys., tab.

Twórcy

autor

Sozańska-Jędrasik L.

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials,18a Konarskiego Str., Gliwice 44-100, Poland

autor

Mazurkiewicz J.

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials,18a Konarskiego Str., Gliwice 44-100, Poland

autor

Borek W.

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials,18a Konarskiego Str., Gliwice 44-100, Poland

autor

Matus K.

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials,18a Konarskiego Str., Gliwice 44-100, Poland

Bibliografia

• [1] M. Jabłońska, Hutnik – Wiadomości Hutnicze 6 (81), 385-389 (2014).
• [2] A. Grajcar, Stal Met. Nowe Technol. 7/8, 10-13 (2013).
• [3] N. Cabañas, N. Akdut, J. Penning, B.C. De Cooman, Metall. Mater. Trans. A 37/11, 3305-3315 (2006).
• [4] M. Witkowska, A. Zielinska-Lipiec, J. Kowalsk, W. Ratuszek, Arch Metall Mater 59, 3, 971-975 (2014).
• [5] A. Grajcar, P. Skrzypczyk, R. Kuziak, K. Gołombek, Steel Res. Int. 85 (6), 1058-1069 (2014).
• [6] X. Tian, H. Li, Y. Zhang, J. Mater. Sci. 43 (18), 6214-6222 (2008).
• [7] Y. Kimura, K. Handa, K. Hayashi, Y. Mishima, Intermetallics 12 (6), 607-617 (2004).
• [8] Y. Kimura, K. Hayashi, K. Handa, Y. Mishima, Mat. Sci. Eng. A-Struct. 329, 680-685 (2002).
• [9] G. Frommeyer, U. Brüx, Steel Res. Int. 77 (9-10), 627-633 (2006).
• [10] E. Mazancová, Z. Jonšta, K. Mazanec, Hutnické listy 2, 60-63 (2008).
• [11] M. Bausch, G. Frommeyer, H. Hofmann, E. Balichev, M. Soler, M. Didier, L. Samek, Ultra high-strength and ductile FeMnAlC light-weight steels (MnAl-steel), Luxembourg 2013.
• [12] I. Gutierrez-Urrutia, D. Raabe, Mater Sci. Tech. Ser. 30, 9, 1099-1104 (2014).
• [13] V. Rigaud, D. Daloz, J. Drillet, A. Perlade, P. Maugis, G. Lesoult, ISIJ INT 47, 6, 898-906 (2007).
• [14] L. A. Dobrzański, W. Borek, Mater. Sci. Forum. 654-656, 266-269 (2010).
• [15] S. S. Sohn, H. Song, B. C. Suh, J. C. Suh, J. H. Kwak, B. J. Lee, N. J. Kim, S. Lee, Acta Mater. 96, 301-310 (2015).
• [16] K. Eipper, G. Frommeyer, W. Fussnegger, A. Gerick, W. Kleineathoefer, United States Patent Application Publication US 2007/0125454A1 (2007).
• [17] M. C. Ha, Mat. Sci. Eng. A-Struct. 586, 276-283 (2013).
• [18] R. Chylińska, B. Piekarski, Archiwum Technologii Maszyn i Automatyzacji 27, 1, 113-120 (2007).
• [19] C.-Y. Chao, C.-H. Liu, Mater Trans. 43, 10, 2635-2642 (2002).
• [20] L.N. Bartlett, D.C. van Aken, J. Medvedeva, D. Isheim, N. I. Medvedeva, K. Song, Metall. Mater. Trans. A 45, 2421-2435 (2014).
• [21] F. Yang, R. Song, Y. Li, T. Sun, K. Wang, Materials and Design 76, 32-39 (2015).
• [22] M. Koyama, H. Springer, S. V. Merzlikin, K. Tsuzaki, E. Akiyama, D. Raabe, Int. J. Hydrogen. Energ. 39, 4634-4646 (2014).
• [23] L. Zhang, R. Song, C. Zhao, F. Yang, Y. Xu, S. Peng, Mat. Sci. Eng. A-Struct. 643, 183-193 (2015).
• [24] H. Springer, D. Raabe, Acta Mater. 60, 4950-4959 (2012).
• [25] D. Kuc, E. Hadasik, G. Niewielski, I. Schindler, E. Mazancová, S. Rusz, P. Kawulok, Arch. Civ. Mech. Eng. 12, 312-317 (2012).
• [26] S. S. Sohn, H. Song, B. C. Suh, J. C. Suh, J. H. Kwak, B.J. Lee, N. J. Kim, S. Lee, Acta Mater. 96, 301-310 (2015).
• [27] E. Mazancová, M. Cagala, B. Smetana, M. Žaludová, METAL 2013: 22nd International Conference on Metallurgy and Materials (2013).
• [28] G. Niewielski, D. Kuc, J. Cebulski, S. Lalik, Archives of Materials Science and Engineering 47, 1, 11-18 (2011).
• [29] D. Janicki, M. Musztyfaga-Staszuk, Stroj. Vestn.J. Mech. E. 62 (6), 363-372 (2016).
• [30] S. Lalik, D. Kuc, G. Niewielski, J. Cebulski, Hutnik – Wiadomości Hutniczne 8, 641-645 (2011).
• [31] B. Bhattacharya, A.S. Sharma, S. S. Hazra, R.K. Ray, Metall. Mater. Trans. A 40, 1190-1202 (2009).
• [32] L. Sozańska-Jędrasik, J. Mazurkiewicz, W. Borek, L.A. Dobrzański, Mater. Eng. 2, 69-76 (2017).
• [33] D. Pakuła, M. Staszuk, T. Tański, Mater. Technol. 50 (5), 755-759 (2016).
• [34] M. Król, T. Tański, P. Snopiński, B. Tomiczek, J. Therm. Anal. Calorim. 127, 1, 299-308 (2017), DOI 10.1007/s10973-016-5845-4.
• [35] A. Zieliński, G. Golański, M. Sroka, Int. J. Pres. Ves. Pip. 152, 1-6 (2017). DOI:10.1016/j.ijpvp.2017.03.002.
• [36] M. Sroka, A. Zieliński, M. Dziuba-Kałuża, M. Kremzer, M. Macek, A. Jasiński, Metals-Basel 7 (3), 82 (2017), DOI:10.3390/met7030082.
• [37] M. Sroka, A. Zieliński, A. Hernas, Z. Kania, R. Rozmus, T. Tański, A. Śliwa, Metalurgija 56 (3-4), 333-336 (2017).
• [38] G. Golański, A. Zielińska-Lipiec, A. Zieliński, M. Sroka, J. Mater. Eng. Perform. 26 (3), 1101-1107 (2017). DOI:10.1007/s11665-017-2556-3
• [39] A. Śliwa, W. Kwasny, M. Sroka, R. Dziwis, Metalurgija 56 (3-4), 422-424 (2017).
• [40] Zieliński, M. Miczka, B. Boryczko, M. Sroka, Arch. Civ. Mech. Eng. (4), 813-824 (2016). DOI:10.1016/j.acme.2016.04.010.
• [41] L. A. Dobrzanski, W. Borek, J. Mazurkiewicz, Materialwiss Werkst 47 (5-6) SI, 428-435 (2016).
• [42] W. Borek, T. Tanski, Z. Jonsta, P. Jonsta, L. Cizek, Metal 2015: 24th International Conference on Metallurgy and Materials, 307-313 (2015).
• [43] M. Król, T. Tański, W. Sitek, Mater. Sci. Eng. 95 A, 012006 (2015).
• [44] S. Boncel, J. Gorka, M. S. P. Shaffer, K. K. K. Koziol, Mater Lett 116, 53-56 (2014).

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).