The visual method in quality assessment of single-lap adhesive joints

• Autorzy: Rudawska A. , Stančeková D , Brzęczek J.

Identyfikatory

DOI

10.12913/22998624/64066

• Języki publikacji: EN

Abstrakty

EN

This article presents selected criteria for the quality assessment of single-lap adhesive joints formed on 0.66±0.04 thick hot dip zinc coated sheets with the hot dip zinc coating thickness equal to 18 μm. Three types of epoxy adhesives and three variants of the mass of adhesives were tested (1 g, 2 g and 3 g). The work intended to assess the capacity of the visual method with regard to evaluating joint quality, allowing for the presence and the size of spew fillet, joint dimensions and the effect of spew fillet on adhesive joint strength. The strength of analysed adhesive joints was determined in destructive tests.

Słowa kluczowe

EN

adhesive joints; visual method; spew fillet; adhesive joints strength

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2016
• Tom: Vol. 10, nr 31
• Strony: 109--118
• Opis fizyczny: Bibliogr. 35 poz., fig., tab.

Twórcy

autor

Rudawska A.

• Department of Production Engineering, Faculty of Mechanical Engineering, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland

autor

Stančeková D

• Department of Machining and Production Technologie, Faculty of Mechanical Engineering, University of Zilina, Univerzitná 8215/1, 010 26 Žilina, Slovak Republic

autor

Brzęczek J.

• The Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, Powstańców Warszawy 8, 35-959 Rzeszów, Poland

Bibliografia

• 1. Godzimirski J., Kozakiewicz J., Łunarski J., Zielecki W.: The constructional bonding joint of metal elements in machine building. Printed by Rzeszow Technical University, Rzeszow 1997, Poland.
• 2. Grant L. D. R., Adams R. D., da Silva L. F. M.: Experimental and numerical analysis of single-lap joints for the automotive industry. International Journal of Adhesion and Adhesives, 29, 2009, 405-413.
• 3. Rudawska A.: Strength of adhesive joint of epoxy composites with dissimilar adherends. Inter¬national Journal of Fracture Fatigue and Wear, 2, 2014, 25-31.
• 4. Rudawska A.: Surface Free Energy and 7075 Aluminium Bonded Joint Strength Following Degreasing Only and Without Any Prior Treatment. Journal Adhesion Science and Technology, 26, 2012, 1233-1247.
• 5. Rudawska A.: Selected aspects of the effect of mechanical treatment on surface roughness and adhesive joint strength of steel sheets. International Journal of Adhesion and Adhesives, 50, 2014, 235-243.
• 6. Müller M., Valášek P.: Degradation medium of agrokomplex - adhesive bonded joints interaction. In. Research in Agricultural Engineering, 58, 2012, 83-91.
• 7. Kowalczyk J.: Non-destructive methods for the evaluation of methods of adhesive joints, Scientific Notebooks, Poland, Poznan University of Technol¬ogy, 63, 2008, 45-50.
• 8. Schliekelmann R. J.: Non-destructive testing of adhesive bonded metal-to-metal joints 1. Non-Destructive Testing, 5(2), 1972, 79–86.
• 9. Holownia B. P.” NDT of adhesive joints affected by water ingression. International Journal of Adhesion and Adhesives, 7, 1987; 25–29.
• 10. Dukes W. A., Kinloch A. J.: Non-destructive testing of bonded joints: An adhesion science viewpoint. Non-Destructive Testing, 7(6), 1974, 324–326.
• 11. Bockenheimer C., Fata D., Possart W., Rothenfusser M., Netzelmann U., Schaefer H.: The method of non-linear ultrasound as a tool for a non-destructive inspection of structural epoxy-metal bonds – a resume. International Journal of Adhesion and Adhesives, 22, 2002, 227-233.
• 12. Adams R. D., Harris J. A.: The influence of local geometry on the strength of adhesive joints. International Journal of Adhesion and Adhesives, 7, 1987, 69-80.
• 13. Adams R. D, Cawley P.: A review of defect types and NDT techniques for composites and bonded joints. NDT International, 21, 1988, 208-222.
• 14. Guyott C. C. H., Cawley P., Adams R. D.: The non-destructive testing of adhesively bonded structure: A review. Journal of Adhesion 20 (2), 1986, 129-159.
• 15. Rudawska A.: Pressure during curing and the strength of 2024, 2017A and 1050 aluminium alloy sheet adhesive joints. Advances in Science and Technology Research Journal, 9 (26), 2015, 96-103.
• 16. Rudawska A.: Influence of the thickness of joined elements on lap length of aluminium alloy sheet bonded joints. Advances in Science and Technology Research Journal, 9 (27), 2015, 35-44.
• 17. Müller M.: Influence of cyclic degradation in saline solution on mechanical properties of adhesive bonds. In. Manufacturing Technology, 16, 2016, 204-209.
• 18. Müller M., Herák D., Valášek P.: Degradation limits of bonding technology depending on destinations Europe, Indonesia. In. Tehnicki Vjesnik- Technical Gazette, 20, 2013, 571-575.
• 19. Ollendorf H., Schülke T., Schneider D.: Testing the adhesion of hard coating including the non-destructive technique of surface acoustic waves. In: Ed. Mittal KL. Adhesion Measurement of Films and Coatings, vol. 2, 49-77, VSP 2001.
• 20. Hlebowicz J., Kalla Ch.: Visual research. Part 2. Research equipment. Gamma Publishers, Warsaw, Poland, 1998
• 21. Apalak M.K., Engin A:. Effect of adhesive free-end geomatry on the initiation and propagation of damaged zones in adhesively bonded lap joints. Journal Adhesion Science and Technology, 18, 2004, 529-559.
• 22. Shenoy V., Ashcroft I.A., Critchlow G.W., Crocome A.D., Abel Wahab M.M.: An investigation into crack initiation and propagation behaviour of bonded single-lap joint Rusing backface strain. International Journal of Adhesion and Adhesives, 29, 2009, 361-371.
• 23. Magalhães A.G., de Moura M.F.S.F., Gonçalves J.P.M.: Evaluation of stress concentration effects in single-lap Bonded joint of laminate composite materials. International Journal of Adhesion and Adhesives, 25, 2005, 313-319.
• 24. Grant L.D.R., Adams R.D., da Silva L.F.M.: Effect of the temperature on the strength of adhesively bonded single lap and T joints for the automotive industry. International Journal of Adhesion and Adhesives, 29, 2009; 535-542.
• 25. Belingardi G., Gogli L., Tarditi A.: Investigating the effect of spew and chamfer size on the stresses in metal/plastics adhesive joints. International Journal of Adhesion and Adhesives, 22, 2002, 273-282.
• 26. Andreassi L., Baudille R., Biancolini M.E.: Spew information in a single lap joints. International Journal of Adhesion and Adhesives 27, 2007, 458-468.
• 27. You M., Yan Z.-M., Zheng X.-L., You H.-Z., Li Z.: A numerical and experimental study of gap length on adhesively bonded aluminium double-lap joint. International Journal of Adhesion and Adhesives, 27, 2007, 696-702.
• 28. Wu Z.J., Romeijn A., Wardenier J.: Stress expressions of single-lap adhesive joint of dissimilar adherends. Composite Structure, 38, 1997, 273-280.
• 29. Wang C.H., Heller M., Rose L.R.F.: Compact solutions for corner singularity in bonded lap joint. International Journal of Adhesion and Adhesives, 20, 2000, 145-154.
• 30. Rudawska A., Czarnota M.: Selected aspects of epoxy adhesive compositions curing process. Journal Adhesion Science and Technology, 27 (17), 2013, 1933-1950.
• 31. Rudawska A., Głogowska K.: Analiza porównawcza wytrzymałości połączeń klejowych wykonanych przy użyciu klejów epoksydowych. Przetwórstwo Tworzyw 4, 2014, 320-325.
• 32. PN-EN 10346:2015-09. Hot-dip coated steel flat products continuously to cold forming-technical delivery conditions.
• 33. http://tds.loctite.com/tds5/docs/9466-EN.PDF (accessed on 04.02.2016).
• 34. http://tds.loctite.com/tds5/docs/9484-EN.PDF (accessed on 04.02.2016).
• 35. http://tds.loctite.com/tds5/docs/3430-EN.PDF (accessed on 04.02.2016).

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.