Modelling of Cr3C2-25% NiCr Laser Alloyed Cast Iron in High Temperature Sliding Wear Condition Using Response Surface Methodology

Jeyaprakash, N.; Duraiselvam, M.; Raju, R.

doi:10.24425/123805

Artykuł - szczegóły

Tytuł artykułu

Modelling of Cr3C2-25% NiCr Laser Alloyed Cast Iron in High Temperature Sliding Wear Condition Using Response Surface Methodology

Autorzy

Jeyaprakash N. , Duraiselvam M. , Raju R.

Treść / Zawartość

Pełne teksty:

Pobierz

Identyfikatory

DOI

10.24425/123805

Warianty tytułu

Języki publikacji

Abstrakty

The wear behaviour of Cr₃C₂-25% NiCrlaser alloyed nodular cast iron sample were analyzed using a pin-on-disc tribometer. The influence of sliding velocity, temperature and load on laser alloyed sample was focused and the microscopic images were used for metallurgical examination of the worn-out sites. Box-Behnken method was utilised to generate the mathematical model for the condition parameters. The Response Surface Methodology (RSM) based models are varied to analyse the process parameters interaction effects. Analysis of variance was used to analyse the developed model and the results showed that the laser alloyed sample leads to a minimum wear rate (0.6079 ×10^–3 to 1.8570 ×10^–3 mm³/m) and coefficient of friction (CoF) (0.43 to 0.53). From the test results, it was observed that the experimental results correlated well with the predicted results of the developed mathematical model.

Słowa kluczowe

Laser Surface Alloying LSA wear microhardness Analysis of Variance ANOVA Response Surface Methodology RSM

Wydawca

Institute of Metallurgy and Materials Science of Polish Academy of Sciences
Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences

Czasopismo

Archives of Metallurgy and Materials

Rocznik

2018

Tom

Vol. 63, iss. 3

Strony

1303--1315

Opis fizyczny

Bibliogr. 41 poz., rys., tab., wykr., wzory

Twórcy

autor

Jeyaprakash N.

National Institute of Technology, Department of Production Engineering, Tiruchirappalli 620015, Tamil Nadu, India

autor

Duraiselvam M.

National Institute of Technology, Department of Production Engineering, Tiruchirappalli 620015, Tamil Nadu, India

autor

Raju R.

Santhiram Engineering College, Department of Mechanical Engineering, Nandyal 518502, Andhra Pradesh, India

Bibliografia

[1] H. Yan, A. Wang, Z. Xiong, K. Xu, Z. Huang, Applied Surface Science. 256 (23), 7001-009 (2010).
[2] K. Y. Benyounis, O. M. A. Fakron, J. H. Abboud, A. G. Olabi, M. J. S. Hashmi, J. Mater. Process. Technol. 170 (1-2), 127-132 (2005).
[3] E. Jonda, Z. Brytan, K. Labisz, A. Drygała, Arch. Metall. Mater. 61 (3), 1309-1314 (2016). DOI: 10.1515/amm-2016-0216.
[4] M. Bonek, Arch. Metall. Mater. 59 (4), 1647-1651 (2014). DOI: 10.2478/amm-2014-0280.
[5] A. R. da Costa, A. Craievich, R. Vilar, Mater. Sci. Eng. A. 336 (1-2), 215-218 (2002).
[6] Q. B. Liu, H. Liu, J. Mater. Process. Technol. 88, 77-82 (1999).
[7] W. Tarasiuk, A.I. Gordienko, A.T. Wolocko, J. Piwnik, B. Szczucka-Lasota, Arch. Metall. Mater. 60 (4), 2939-2943 (2015). DOI: 10.1515/amm-2015-0469.
[8] W. P. Jiang, P. Mollan, Surf. Coat. Technol. 135, (2-3), 139-149 (2001).
[9] B. S. Yilbas, S. Z. Shuja, S. M. A. Khan, A. Aleem, Appl. Surf. Sci. 255 (23), 9396-9403 (2009).
[10] W. L. Xu, T. M. Yue, H. C. Man, C. P. Chan, Surf. Coat. Technol. 200 (16-17), 5077-5086 (2006).
[11] J. H. Yao, L. Wang, Q. Zhang, F. Z. Kong, C. H. Lou, Z. J. Chen, Opt. Laser Technol. 40, 838-843 (2008).
[12] M. L. Zhong, W. J. Liu, H. J. Zhang, Wear. 260, 1349-1355 (2006).
[13] B. G. Guo, J. S. Zhou, S. T. Zhang, H. H. Zhou, Y. P. Pu, J. M. Chen, Mater. Sci. Eng. A. 480, 404-410 (2008).
[14] A. H. Wang, X. L. Zhang, X. F. Zhang, X. Y. Qiao, H. G. Xu, C. S. Xie, Mater. Sci. Eng. A. 475, (1-2), 312-318 (2008).
[15] M. Bonek, Arch. Metall. Mater. 61 (2), 719-724 (2016). DOI: 10.1515/amm-2016-0123.
[16] J. He, J. M. Schoenung, Mater. Sci. Eng. A. 336, 274-319 (2002).
[17] Sivarao, Shukor, T. J. S. Anand, Ammar, Int. J. of Eng. Techn. 10 (4), 1-7 (2010).
[18] F. H. Stott, D. S. Lin, G. F. Wood, C.W. Stevenson, Wear. 36 (2), 147-74 (1969).
[19] R. Kumar, S. Dhiman, Materials Design. 50, 351-359 (2013).
[20] J. F. Lin, C. C. Chou, Tribology International. 35 (11), 771-785 (2002).
[21] M. C. M. Farias, R. M. Souza, A. Sinatora, D. K. Tanaka, Wear. 263 (1-6), 773-781 (2007).
[22] Y. Sahin, K. A. Ozdin, Materials and Design. 29 (3), 728-733 (2008).
[23] Standard test method for wear testing with a pin-on-disk apparatus, ASTM Standard. G: 99-05 (2010).
[24] S. Rajakumar, C. Muralidharan, V. Balasubramanian, Trans. Non Ferr. Mat. Soc. 20 (10), 1863-72 (2010).
[25] S. C. Vettivel, N. Selvakumar, R. Narayanasamy, N. Leema, Materials and Design. 50, 977-996 (2013).
[26] S. Rajakumar, C. Muralidharan, V. Balasubramanian, Mater Des. 32 (5), 2878-90 (2011).
[27] R. Narayanasamy, M. Ravichandran, C. Sathiya Narayanan, N. L. Parthasarathi, R. Ravindran, Int. J. Mech. Mater. Des. 3 (4), 293-307 (2006).
[28] D. Prabhakaran, C. A. Basha, T. Kannadasan, P. Aravinthan, J. Environ Sci. Health Part A. 45 (4), 400-12 (2010).
[29] A. K. Lakshminarayanan, V. Balasubramanian, Trans Non Ferr Met Soc. 19 (1), 9-18 (2009).
[30] W. Xiao, S. Xinhua, J. Minfeng, L. Pin, H. Yang, W. Kai, Opt. Las. Technol. 44 (3), 656-63 (2012).
[31] P. Dinesh Babu, G. Buvanashekaran, K. R. Balasubramanian, Tribology Transactions. 58 (4), 602-615 (2015).
[32] A. Gulzar, J. I. Akhter, M. Ahmad, G. Ali, M. Mahmood, M. Ajmal, Appl. Surf. Sci. 255 (20), 8527-8532 (2009).
[33] Y. Chen, C. H. Gan, L. X. Wang, G. Yu, A. Kaplan, Appl. Surf. Sci. 245 (1-4), 316-321 (2005).
[34] D. W. Zeng, C. S. Xie, K. C. Yung, Mater. Sci. Eng. A. 333, 223-231 (2002).
[35] N. Jeyaprakash, M. Duraiselvam, S. V. Aditya, Surface Review. and Letters. 26, 1950009 (2019).
[36] L. Pengting, L. Yunguo, W. Yuying, M. Guiong, L. Xiangfa, Mater. Sc. Eng. A. 546, 146-52 (2012).
[37] B. Bhushan, W. E. Jahsman, Int. J. Solids and Struc. 14 (1), 39-51 (1978).
[38] B. Bhushan, W. E. Jahsman, Int. J. Solids and Struc. 14 (9), 739-753 (1978).
[39] M. A. Chowdhury, M. M. Helali, Tribology International. 41 (4), 307-314 (2008).
[40] K. Velmanirajan, A. S. Abu Thaheer, R. Narayanasamy, C. A. Basha, Mater. Des. 41, 239-54 (2012).
[41] S. Anbuselvan, S. Ramanathan, Mater. Des. 31 (4), 1930-6 (2010).

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-83ee7394-6516-4de5-bddf-71557f429213