Traverse Grinding of X6CrNiMoTi Steel and its Final Surface Quality for Giving Cutting Conditions

• Autorzy: Naprstkova N. , Novak M. , Hricova J.
• Języki publikacji: EN

Abstrakty

EN

Machining of stainless steels is often an important used technology. Products made from these materials are often used in mechanical engineering and the quality of workpiece surface roughness after machining respective grinding is one of the important parameters that illustrates the quality of the machining process. This paper deals with the influence of cutting conditions when grinding steel X6CrNiMoTi (EN ISO) on the machined quality surface (roughness, circularity). Grinding of samples was carried out by feed grinding and the measured values were analyzed. On the machined samples parameters were all monitored and measured in the laboratory of precision measurements at the Faculty of Production Technology and Management of Jan Evangelista Purkyně University in Ústí nad Labem and the devices Hommel tester T1000 and Hommel tester Form 1000 were used. Measuring was done according to ČSN EN ISO 4287.

Słowa kluczowe

EN

grinding; surface quality; stainless steel; cutting conditions

PL

szlifowanie; jakość powierzchni; stal nierdzewna; warunki skrawania

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Production Engineering Archives
• Rocznik: 2015
• Tom: Vol. 7, No. 2
• Strony: 49--52
• Opis fizyczny: Bibliogr. 15 poz., rys., tab

Twórcy

autor

Naprstkova N.

• Faculty of Production Technology and Management, Jan Evangelista Purkyně University in Ústínad Labem, Pasteurova 1, 400 96 Ústínad Labem, Czech Republic, [phone]

autor

Novak M.

• Faculty of Production Technology and Management, Jan Evangelista Purkyně University in Ústínad Labem, Pasteurova 1, 400 96 Ústínad Labem, Czech Republic, [phone]

autor

Hricova J.

• Faculty of Environmental and Manufacturing Technology, Technical University of Zvolen, Študentská 26, 960 53 Zvolen, Slovak Republic, [phone]

Bibliografia

• 1. Dugin, A., Popov, A. 2013 Increasing the accuracy of the effect of processing materil and cutting tool wear on the ploughingforce values. In Manufacturing Technology, Vol 13, No.2, pp.169-173, ISSN 1213-2489.
• 2. Jersák, J. 2012 Vliv dynamického vyvážení brousicího kotouče na drsnost povrchu obrobených součástí (Effect of dynamic balancing of the grinding wheel on the surface roughness of machined components). In Strojírenská technologie (In Production Technology), Vol.17, No.1,2, p.27-33, ISSN 1211-4162.
• 3. Jusko, O. 2010 Vývoj a inovace brousicích nástrojů (Development and innovation of grinding tools) In Strojírenská technologie (In Production Technology), Vol.15, No.1, p. 17-22, ISSN 1211-4162.
• 4. Kalincová, D. 2010 Skušanie mechanických vlastností materiálov - prehlad meracich metod a zariadeni (Testing of mechanical properties of materials - overview of measuring methods and devices). KEGA 3/6370/08., TU vo Zvolene, Zvolen.,. p.13-26.
• 5. Kocman, K. 2012 Optimalizace dokončovacích operaci výrobních procesů (Optimizing of finishing operations of manufacturing processes). In Strojírenská technologie (In Production Technology), Vol.17, No.3, p.164-169, ISSN 1211-4162.
• 6. Mádl. J., Holešovský, F. 2008 Integrita obrobených povrchů z hlediska funkčních vlastností (The integrity of the machined surfaces in terms of functional properties). Ústí nad Labem, FVTM UJEP, 230 p.
• 7. Mádl, J. 2012 Surface Properties in Precise and Hard Machining. In Manufacturing Technology, Vol.12, No.13,. p.158-166, ISSN 1213-2489.
• 8. Marinescu, I., D., et all. 2007 Handbook of Machining with Grinding wheels, Boca Raton, CRC Press,. 592 p.
• 9. Novák, M. 2011 Studium jakosti brouseneho povrchu kalenych oceli, cast I. – drsnost povrchu (Study of the ground surface quality hardened steels, Part I. - surface roughness, In Strojírenská technologie (In Production Technology), Vol.16, No.6,. p.26-33, ISSN 1211-4162.
• 10. Novák, M. 2012 Surface with high precision of roughness after grinding. Manufacturing Technology, Vol.12, No.12,. p.66-70, ISSN 1213-2489.
• 11. Novák, M. 2014 Grinding of stainless steel XCrNiMoTi and its final rooudness. Production Engineering Archives, Vol.5, No.4. PC, Cztestochowa, p. 18-21. ISSN 2553-5156.
• 12. Osička, K. 2009 Průměrná aritmetická úchylka drsnosti povrchu - statistické vyhodnoceni plochy. In Strojírenská technologie (In Production Technology), Vol.14, No.1, p.30-3, ISSN 1211-4162.
• 13. Rokyta, L., Lukovics, I. 2012 Výzkum vlivu poměrů brusiv na jakost povrchu při broušení. (Research of the abrasives ratio influence on the surface quality when grinding). In Strojírenská technologie (In Production Technology),. Vol.17, No.1,2,. p. 93-95, ISSN 1211-4162.
• 14. Stančeková, D., Štekláč, A., Czán, A., Ďurech, L., Mlynár, M. 2008 New Information about Dressing of Grinding Wheels. MITECH ´08, 26.-27. 6. 2008, Praha, s. 202 - 207 ISBN 978 - 80 - 213 - 1792 – 5.
• 15. Valíček, J., Rusnák, J., Müller, M., Hrabě, P., Kadnar, M., Hloch, S., Kušnerová, M. 2008 Geometrické aspekty drsnosti povrchu klasických a netradičních technologií (Geometrical aspects of surface roughness of classic and innovative technologies). In Jemná mechanika a optika (In Precision Mechanics and Optics), Vol.53, No.9, p. 249-253.