Influence of Intensification Factors on Quality of Fe Agglomerates Made with Alternative Fuel

• Autorzy: Semanová Z. , Legemza J. , Hrubovčáková M. , Findorák R. , Fröhlichová M.

Identyfikatory

DOI

10.24425/amm.2018.125115

• Języki publikacji: EN

Abstrakty

EN

Currently is the biggest problem of metallurgical companies the increase of fossil fuel prices and strict environmental regulations. As a result of this, companies must look for alternatives that would reduce the amount of fossil fuels and reduce emissions. Wood sawdust has huge energy potential, which can be used in the process of agglomerate production. This type of energy is locally available, has some similar properties as fossil fuels and is economically advantageous. For these reasons, experimental study using laboratory agglomeration pan was realized to study the possibility of agglomerate production with a mixed fuel. Experimental results show the viability of mixed fuel use in the agglomeration process, but also show significant possibility for improvement. The maximum acceptable substitution ratio, which corresponds to qualitatively suitable agglomerate is 20% of pine sawdust. Based on the realized experiments and the obtained results we have acceded to the intensification of the agglomeration process with an objective to increase the amount of added substitution fuel while maintaining the required quality of agglomerate.

Słowa kluczowe

EN

processing; sintering; intensification; microstructure; agglomerate; fuel

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2018
• Tom: Vol. 63, iss. 4
• Strony: 1853--1857
• Opis fizyczny: Bibliogr. 22 poz., fot., rys., tab.

Twórcy

autor

Semanová Z.

• Technical University of Košice, Faculty of Materials, Metallurgy and Recycling Institute of Metallurgy, Department of Metallurgy and Foundry, Technical University of Košice, 04001, Slovakia

autor

Legemza J.

• Technical University of Košice, Faculty of Materials, Metallurgy and Recycling Institute of Metallurgy, Department of Metallurgy and Foundry, Technical University of Košice, 04001, Slovakia

autor

Hrubovčáková M.

• Technical University of Košice, Faculty of Materials, Metallurgy and Recycling Institute of Metallurgy, Department of Metallurgy and Foundry, Technical University of Košice, 04001, Slovakia

autor

Findorák R.

• Technical University of Košice, Faculty of Materials, Metallurgy and Recycling Institute of Metallurgy, Department of Metallurgy and Foundry, 04001, Slovakia

autor

Fröhlichová M.

• Technical University of Košice, Faculty of Materials, Metallurgy and Recycling Institute of Metallurgy, Department of Metallurgy and Foundry, 04001, Slovakia

Bibliografia

• [1] E. W. Maruszewska, M. Vaněk, Š. Vilamová, Acta Montanistica Slovaca 20, 2, 70-78 (2014).
• [2] M. Antošová, A. Csikósová, K. Čulková, A. Seňová, Metalurgija 52, 3, 410-412 (2013).
• [3] [09.10.2017]. http://www.metcokeconsultants.com/Media/Global-Forecast-for-Steel-Coal-MetCoal-2012-and-Beyond.pdf
• [4] Y. Jiang, Z. Huang, B. Xu, T. Jiang, Journal of Central South University of Technology 18, 6, 1917-1923 (2011). Doi: 10.1007/s11771-011-0923-z
• [5] J. P. Zhao, Ch. E. Loo, R. D. Dukino, Combustion and Flame 162, 4, 1019-1034 (2015). Doi: https://doi.org/10.1016/j.combustflame.2014.09.026
• [6] K. Murakami, K. Sugawara, T. Kawaguchi: ISIJ International 53, 9, 1580-1587 (2013). Doi: http://doi.org/10.2355/isijinternational.53.1580
• [7] X. Fan, Z. Yu, M. Gan, X. Che, Z. Ji, Journal of Central South University 21, 6, 2391-2396 (2014). Doi: 10.1007/s11771-014-2192-0
• [8] G. Chen, D. Y. C. Leung, Energy Sources 25, 4, 331-337, (2003). Doi: http://dx.doi.org/10.1080/00908310390142361
• [9] L. J. R. Nunes, J. C. O. Matias, J. P. S. Catalão, Renewable and Sustainable Energy Reviews 53, 235-242 (2016). Doi: https://doi.org/10.1016/j.rser.2015.08.053
• [10] M. Zandi, M. Martinez-Pacheco, T. Fray, Minerals Engineering 23, 14, 1139-114 (2010). Doi: https://doi.org/10.1016/j.mineng.2010.07.010
• [11] T. Ch. Ooi, D. Thompson, D. R. Anderson, R. Fisher, T. Fray, M. Zandi, Minerals Engineering 21, 2, 167-177 (2008). Doi: https://doi.org/10.1016/j.mineng.2007.09.005
• [12] M. Gan, X. Fan, X. Chen, Z. Ji, W. Lv, Y. Wang, Z. Yu, T. Jiang, Isij International 52, 9, 1574-1578 (2012). Doi: http://doi.org/10.2355/isijinternational.52.1574
• [13] Z. Cheng, J. Yang, L. Zhou, Y. Liu, Q. Wang, Applied Energy 161, 364-374 (2016). Doi: https://doi.org/10.1016/j.apenergy.2015.09.095
• [14] J. Jandačka, Biomass as an energy source, first ed., GEORG, 2007, ISBN 978-80-969161-3-9
• [15] P. Chudíková, M. Taušová, K. Erdélyiová, T. Tauš, Acta Montanistica Slovaca 15, 2, 139-145 (2010).
• [16] T. Ch. Ooi, D. Thompson, D. R. Anderson ,R. Fisher, T. Fray, M. Zandi, Combustion and Flame 158, 5, 979-987 (2011). Doi: https://doi.org/10.1016/j.combustflame.2011.01.020
• [17] J. Hudák, M. Butkovská, J. Leško, Acta Metallurgica Slovaca-Conference 4, 1, 47-55, (2014). Doi: 10.12776/amsc.v4.257
• [18] J. Legemza, M. Fröhlichová, R. Findorák, Thermodynamic study of utilization of sawdust from oak-wood in the iron-ore sintering process, In: SGEM International Scientific GeoConference, Albena, 987-994 92014).
• [19] R. Findorák, M. Fröhlichová, J. Legemza, Acta Metallurgica Slovaca – Conference 4, 1, 23-30 (2014). Doi: 10.12776/amsc.v4.261
• [20] L. Qin, J. Han, W. Ye, S. Zhang, Q. Yan, F. Yu, Energy Fuels 28, 2, 848-857 (2014). Doi: 10.1021/ef401942a
• [21] M. Fröhlichová, D. Ivanišin, A. Mašlejová, R. Findorák, J. Legemza, Archives of Metallurgy and Materials 60, 4, 2895-2899 (2015). Doi: 10.1515/amm-2015-0462
• [22] M. Fröhlichová, J. Legemza, R. Findorák, A. Mašlejová, Archives of Metallurgy and Materials 59, 2, 815-820 (2014). Doi: 10.2478/amm-2014-0139

Uwagi

EN

This work was created with the support of the Agency for the Support of Science and Research (APVV), Slovak Republic, APVV-16-0513 and VEGA 1/0847/16.