Fluctuations in Chemical Composition of M7C3 Carbides in the Soft Annealed Nc11lv/D2 Steel

• Autorzy: Hryniewicz T. , Nykiel T.

Identyfikatory

DOI

10.2478/adms-2014-0003

• Języki publikacji: EN

Abstrakty

EN

The paper presents the study results on chemical composition of the coarse primary M₇C₃ carbides occurring in the soft annealed NC11LV/D2 tool steel consisting of: 1.53% C; 11.65% Cr; 0.01% W; 0.81% Mo; 0.068% V; (balance iron plus admixtures), used for cold operation. The microanalyzer of type SEMPROBE Su-30, French made by CAMECA Co., equipped with two WDS X-ray spectrometers and an EDS VOYAGER 3 100, NORAN Instruments Co., made in USA. It was found that out of the three alloying elements occurring in the big carbides of the annealed NC11LV/D2 steel, i.e. Cr, Mo, and V, the chromium appears to be the most uniformly distributed. The big carbides vary concerning C, Cr, Mo, V; the greatest differentiation degree of the contents of Mo and Cr, and the least - of vanadium. The average chemical composition of the big/coarse carbides is as follows: C = 9.42±1.28%; Cr = 44.17±2.95%; Mo = 4.48±3.52%; V = 4.53±0.31%; balance Fe.

Słowa kluczowe

EN

D2 tool steel; primary carbides M7C3; carbides distribution; chemical composition; chromium distribution

• Wydawca: Politechnika Gdańska
• Czasopismo: Advances in Materials Science
• Rocznik: 2014
• Tom: Vol. 14, nr 1(39)
• Strony: 24--30
• Opis fizyczny: Bibliogr. 26 poz., rys., tab.

Twórcy

autor

Hryniewicz T.

• Koszalin University of Technology, Faculty of Mechanical Engineering, Racławicka 15-17 75-620 Koszalin, Poland

autor

Nykiel T.

• Koszalin University of Technology, Faculty of Mechanical Engineering, Racławicka 15-17 75-620 Koszalin, Poland

Bibliografia

• 1. T. Sato, Y. Honda, T. Nishizawa, Tetsu To Hagane, 42(12) (1951) 1118-1122.
• 2. Z. Głowacki, PhD Thesis, Poznań 1956.
• 3. W. Kowalski, Prace Instytutu Mechaniki Precyzyjnej, 14(28) (1966) 1-18.
• 4. K. Kałuża, PhD Thesis, Politechnika Poznańska, Poznań, 1979.
• 5. T. Nykiel, PhD Thesis, Politechnika Poznańska, Poznań, 1982.
• 6. T. Nykiel, T. Hryniewicz, Kinetics of Carbides Dissolution During Austenitizing of Tool Steel D3 (2% C and 12% Cr with Additives of W, Mo, V), Proc. of the 6th Intern. Seminar IFHT, Kyongju TEMF Hotel, 15-18 October, Korea, 1997, pp. 238-245
• 7. E. Haberling, I. Schruff, Thyssen Edelst. Techn. Ber., 13(1) (1987) 64-71.
• 8. D. Grman, N. Klantschi, C. Solenthaler, Material und Technik, 4 (1988) 81-88.
• 9. F. Staub, J. Adamczyk, L. Cieślak, J. Gubała, A. Maciejny, Metaloznawstwo, Śląsk Ed., Katowice, 1973, 386-389.
• 10. A.K. Sinha, Physical metallurgy handbook, The McGraw-Hill Companies, Inc., 2003.
• 11. T. Nykiel, T. Hryniewicz, Trans. Indian Inst. Met., 65(2) (2012) 219-230.
• 12. L. Zhou, D. Sun, C.-S. Liu, Q. Wu, J. Iron and Steel Research Intern., 13(6) (2006) 49-52.
• 13. S.D. Carpenter, D. Carpenter, Materials Letters, 57 (2003) 4456-4459.
• 14. S.D. Carpenter, D. Carpenter, Materials Letters, 57 (2003) 4460-4465.
• 15. S.D. Carpenter, D.E.O.S. Carpenter, J.T.H. Pearce, J. Alloys and Compounds, 494 (2010) 245-251.
• 16. F. Ernst, D. Li, H. Kahn, G.M. Michal, A.H. Heuer, Acta Materialia, 59 (2011) 2268-2276.
• 17. M.J. Monteiro, F.C. Rizzo, Mater. Sci. Forum, 522-523 (2005) 171-180.
• 18. M. Palcut, V. Vach, R. Cicka, J. Janovec, Archives of Metallurgy and Materials, 53(4) (2008) 1157-1164.
• 19. Y. Zhang, G. Zong, K. Shui, M. He, Heat Treatment of Metals, 10 (2010) 44-47.
• 20. P. Bała, Archives of Metallurgy and Materials, 54(2) (2009) 491-498.
• 21. A. Molinari, M. Pellizzari, A. Biggi, G. Corbo, A. Tremea, Primary carbides in spincast HSS for hot rolls and their effect on the oxidation behaviour, Proc. 6th Intern. Tooling Conference, 2002, 33_437_452_pdf_66272.
• 22. Szummer A. (ed.), Fundamentals of quantitative analysis of X-ray microanalysis, WNT, Warszawa, 1994
• 23. J.L. Pouchou, F. Pichoir, la Recherches Aerospatiale, 5 (1984) 13-38.
• 24. K.M. Zhang, J.X. Zou, B. Bolle, T. Grosdidier, Vacuum, 87 (2013) 60-68.
• 25. M.B. Mhamdi, S.B. Salem, M. Boujelbene and E. Bayraktar, Journal of Mechanical Science and Technology, 27(11) (2013) 3451-3461.
• 26. T. Aized & M. Amjad, Intern. Journal of Advanced Manufacturing Technology, 69 (2013) 2493-2503.