Ultrasonic Assisted Active-Passive Filling Friction Stir Repairing to Eliminate Volume Defects

• Autorzy: Wang Tao , Gong Xue , Ji Shude , Xue Gang , Lv Zan

Identyfikatory

DOI

10.24425/amm.2021.134778

• Języki publikacji: EN

Abstrakty

EN

Ultrasonic assisted active-passive filling friction stir repairing (A-PFFSR) was proposed to repair volume defects in the metallic parts. Sound joints without interfacial defects could be achieved. Firstly, the ultrasonic was beneficial to improving material flow and atom diffusion, and then eliminated kissing bond defects compared to conventional A-PFFSR joints. Secondly, the equiaxed grains were refined by ultrasonic vibration. Lastly, the repairing passes were reduced due to the ultrasonic, which decreased softening degree of the repaired joints. The maximum tensile strength of 150 MPa was achieved. Therefore, this strategy to repair the volume defects is feasibility and potential in the remanufacturing fields of aerospace and transportation.

Słowa kluczowe

EN

friction stir repairing; magnesium alloys; defects; ultrasonic; mechanical properties

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2021
• Tom: Vol. 66, iss. 1
• Strony: 217--222
• Opis fizyczny: Bibliogr. 35 poz., fot., rys., wykr.

Twórcy

autor

Wang Tao

• Luoyang Ship Material Research Institute, Luoyang 471023, P. R. China

autor

Gong Xue

• Shenyang Aerospace University, College of Aerospace Engineering, Shenyang 110136, P. R. China

autor

Ji Shude

• Shenyang Aerospace University, College of Aerospace Engineering, Shenyang 110136, P. R. China

autor

Xue Gang

• Luoyang Ship Material Research Institute, Luoyang 471023, P. R. China

autor

Lv Zan

• Shenyang Aerospace University, College of Aerospace Engineering, Shenyang 110136, P. R. China

Bibliografia

• [1] R. Zettler, T. Donath, J.F. Dos Santos, F. Beckman, D. Lohwasser. Adv. Eng. Mater. 8 (6), 487-490 (2006). doi:10.1002/adem.200600062
• [2] R. Zettler, A.A.M. Da Silva, S. Rodrigues, A. Blanco, J.F. Dos Santos. Adv. Eng. Mater. 8 (5), 415-421 (2006). doi:10.1002/adem.200600030
• [3] B. He, L. Cui, D.P. Wang, H.J. Li, C.X. Liu. Acta Metall. Sin. (English Lett. 2019 (2019). doi:10.1007/s40195-019-00951-x
• [4] G. Wang, Y. Zhao, Y. Hao. J. Mater. Sci. Technol. 34 (1), 73-91 (2017). doi:10.1016/j.jmst.2017.11.041
• [5] X. Meng, Y. Jin, S. Ji, D. Yan. J. Mater. Sci. Technol. 34 (10) (2018). doi:10.1016/j.jmst.2018.02.022
• [6] G.K. Padhy, C.S. Wu, S. Gao. J. Mater. Sci. Technol. 34, 1-38 (2017). doi:10.1016/j.jmst.2017.11.029
• [7] W.F. Xu, Y.X. Luo, M.W. Fu. Mater. Charact. 138, 48-55 (2018). doi:10.1016/j.matchar.2018.01.051
• [8] Z. Liu, S. Ji, X. Meng, Z. Li. Can. Metall. Q. 57 (2), 181-185 (2018). doi:10.1080/00084433.2017.1412555
• [9] F. Acerra, G. Buffa, L. Fratini, G. Troiano. Int. J. Adv. Manuf. Technol. 48 (9-12), 1149-1157 (2010). doi:10.1007/s00170-009-2344-9
• [10] X. Zhang, Z.P. Cano, B. Wilson, J.R. McDermid, J.R. Kish. Can. Metall. Q. 56 (3), 308-321 (2017). doi:10.1080/00084433.2017.1327500
• [11] C. Gunter, M.P. Miles, F.C. Liu, T.W. Nelson. J. Mater. Sci. Technol. 34 (1), 140-147 (2017). doi:10.1016/j.jmst.2017.10.023
• [12] S. Ji, X. Meng, L. Ma, H. Lu, S. Gao. Mater. Des. 68 (2015). doi:10.1016/j.matdes.2014.12.009
• [13] S. Ji, X. Meng, J. Xing, L. Ma, S. Gao. High Temp. Mater. Process. 35 (8), 843-851 (2016). doi:10.1515/htmp-2015-0063
• [14] H. Liu, H. Zhang. Trans. Nonferrous Met. Soc. China. 19 (3), 563-567 (2009). doi:10.1016/S1003-6326(08)60313-1
• [15] D.F. Metz, M.E. Barkey. Int. J. Fatigue. 43, 178-187 (2012). doi:10.1016/j.ijfatigue.2012.04.002
• [16] Y.C. Lim, L. Squires, T.Y. Pan, ... Z. Feng. Mater. Des. 69, 37-43 (2015). doi:10.1016/j.matdes.2014.12.043
• [17] Y.X. Huang, B. Han, S.X. Lv, ... Y. Li. Sci. Technol. Weld. Joi. 17 (3), 225-230 (2012). doi:10.1179/1362171811Y.0000000100
• [18] B. Han, Y. Huang, S. Lv, L. Wan, J. Feng, G. Fu. Mater. Des. 51, 25-33 (2013). doi:10.1016/j.matdes.2013.03.089
• [19] Y.X. Huang, B. Han, Y. Tian, ... Y. Li. Sci. Technol. Weld. Joi. 16 (6), 497-501 (2011). doi:10.1179/1362171811Y.0000000032
• [20] S.D. Ji, X.C. Meng, R.F. Huang, L. Ma, S.S. Gao. Mater. Sci. Eng. A. 664, 94-102 (2016). doi:10.1016/j.msea.2016.03.131
• [21] S. Ji, X. Meng, Y. Zeng, L. Ma, S. Gao. Mater. Des. 97, 175-182 (2016). doi:10.1016/j.matdes.2016.02.088
• [22] R. Huang, S. Ji, X. Meng, Z. Li. J. Mater. Process Technol. 255, 765-772 (2018). doi:10.1016/j.jmatprotec.2018.01.019
• [23] S. Niu, B. Wu, L. Ma, Z. Lv, D. Yan. d, 2461-2468 (2018).
• [24] Z. Liu, X. Meng, S. Ji, Z. Li, L. Wang. J. Manuf. Process. 31, 552-559 (2018). doi:10.1016/j.jmapro.2017.12.022
• [25] S. Ji, X. Meng, Z. Liu, R. Huang, Z. Li. Mater. Lett. 201, 173-176 (2017). doi:10.1016/j.matlet.2017.05.011
• [26] X.C. Liu, C.S. Wu. Mater. Des. 90, 350-358 (2016). doi:10.1016/j.matdes.2015.10.131
• [27] G.K. Padhy, C.S. Wu, S. Gao. Sci. Technol. Weld. Joi. 20 (8), 631-649 (2015). doi:10.1179/1362171815Y.0000000048
• [28] Z. Ma, Y. Jin, S. Ji, X. Meng, L. Ma, Q. Li. J. Mater. Sci. Technol. 35 (1), 94-99 (2019). doi:10.1016/j.jmst.2018.09.022
• [29] M. Thomä, G. Wagner, B. Straß, B. Wolter, S. Benfer, W. Fürbeth. J. Mater. Sci. Technol. 34 (1), 163-172 (2017). doi:10.1016/j.jmst.2017.10.022
• [30] S. Ji, S. Niu, J. Liu, X. Meng. J. Mater. Process Technol. 2019 (2019). doi:10.1016/j.jmatprotec.2018.12.010
• [31] X.C. Liu, C.S. Wu. J. Mater. Process Technol. 225, 32-44 (2015). doi:10.1016/j.jmatprotec.2015.05.020
• [32] W. Li, J. Li, Z. Zhang, D. Gao, W. Wang, C. Dong. Mater. Des. 62, 247-254 (2014). doi:10.1016/j.matdes.2014.05.028
• [33] S.D. Ji, X.C. Meng, L. Ma, S.S. Gao. Int. J. Adv. Manuf. Technol. 87 (9-12), 3051-3058 (2016). doi:10.1007/s00170-016-8734-x
• [34] Y. Huang, X. Meng, Y. Xie, J. Li, L. Wan. Compos. Part A, Appl. Sci. Manuf. 112 (April), 328-336 (2018). doi:10.1016/j.compositesa.2018.06.027
• [35] M. Guan, Y. Wang, Y. Huang, J. Li. Mater. Lett. 255, 126506 (2019). doi:10.1016/j.matlet.2019.126506

Uwagi

1. This work is supported by the National Natural Science Foundation of China (No. 51705339).

2. Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).