PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!
Tytuł artykułu

Effect of reaction time on the structure and optical properties of P3HT/MWCNT-OH nanocomposites

Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Wpływ czasu reakcji na strukturę i właściwości optyczne nanokompozytów P3HT/MWCNT-OH
Języki publikacji
EN
Abstrakty
EN
In the present study, regioregular poly(3-hexylthiophene-2,5-diyl) (P3HT) coated hydroxylated multi-walled carbon nanotubes (MWCNT-OH) nanocomposites were prepared over different reaction times of non-covalent functionalization. The reaction time was set as 24, 48, 72, 96, and 120 hours. The structure and optical characteristics of nanocomposites were analyzed using Fourier-transform infrared (FTIR) and ultraviolet-visible (UV-Vis) spectroscopy, respectively. Reaction time affected prepared nanocomposites by decreasing the intensity of the P3HT/MWCNT-OH peaks gradually with increasing of the reaction time. Comparing with the pure P3HT and MWCNT-OH, the calculated energy band gap and the Urbach energy of the nanocomposites were reduced proportionally as the reaction time reached 120 hours and achieved 2.60 and 0.329 eV, respectively.
PL
Syntetyzowano hydroksylowane wielościenne nanorurki węglowe (MWCNT-OH) pokryte stereoregularnym poli(3-heksylotiofen-2,5-diylu) (P3HT) oraz zbadano wpływ czasu reakcji niekowalencyjnej funkcjonalizacji na strukturę i właściwości optyczne otrzymanego nanokompozytu. Czas reakcji wynosił 24, 48, 72, 96 i 120 godzin. W badaniach wykorzystano spektroskopię w podczerwieni z transformacją Fouriera (FTIR) oraz ultrafioletową UV-Vis. Wraz ze wzrostem czasu reakcji następowało stopniowe zmniejszenie intensywności pików P3HT/MWCNT-OH. W porównaniu z P3HT i MWCNT-OH obliczona przerwa energetyczna i energia Urbacha zmniejszały się wraz z wydłużeniem czasu reakcji i osiągnęły odpowiednio 2,60 i 0,329 eV przy czasie reakcji 120 godzin.
Czasopismo
Rocznik
Strony
205--211
Opis fizyczny
Bibliogr. 59 poz., rys., tab.
Twórcy
  • Centre for Defence Foundation Studies, National Defence University of Malaysia, Kem Sungai Besi, 57000 Kuala Lumpur, Malaysia
  • Centre for Defence Foundation Studies, National Defence University of Malaysia, Kem Sungai Besi, 57000 Kuala Lumpur, Malaysia
  • Centre for Defence Foundation Studies, National Defence University of Malaysia, Kem Sungai Besi, 57000 Kuala Lumpur, Malaysia
  • Centre for Defence Foundation Studies, National Defence University of Malaysia, Kem Sungai Besi, 57000 Kuala Lumpur, Malaysia
  • Centre for Defence Foundation Studies, National Defence University of Malaysia, Kem Sungai Besi, 57000 Kuala Lumpur, Malaysia
  • Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
Bibliografia
  • [1] Yang C., Zhang S., Hou J.: Aggregate 2021:e111. https://doi.org/10.1002/agt2.111
  • [2] Tsai H.W., Hsueh K.L., Chen M.H., Hong C.W.: Crystals 2021, 11(11), 1292. https://doi.org/10.3390/cryst11111292
  • [3] Nurazzi N.M., Harussani M.M., Demon S.Z. et al.: ZULFAQAR Journal of Defence Science, Engineering and Technology 2022, 5(1). https://zulfaqarjdset.upnm.edu.my/index.php/zjdset/article/view/65
  • [4] Ansari M.A., Mohiuddin S., Kandemirli F., Malik M.I.: RSC Advances 2018, 8(15), 8319. https://doi.org/10.1039/C8RA00555A
  • [5] Hu Q., Lu Z., Wang Y. et al.: Journal of Materials Chemistry A 2020, 8(26), 13095. https://doi.org/10.1039/D0TA03247F
  • [6] Norizan M.N., Moklis M.H., Demon S.Z. et al.: RSC Advances 2020, 10(71), 43704. https://doi.org/10.1039/D0RA09438B
  • [7] Mohd Nurazzi N., Asyraf M.M., Khalina A. et al.: Polymers 2021, 13(7), 1047. https://doi.org/10.3390/polym13071047
  • [8] Nurazzi N.M., Abdullah N., Demon S.Z. et al.: Nanotechnology Reviews 2021, 10(1), 330. https://doi.org/10.1515/ntrev-2021-0030
  • [9] Wu Z., Yang Z., Pei K. et al.: Nanoscale 2020, 12(18), 10149. https://doi.org/10.1039/D0NR01447H
  • [10] Mo Z., Yang R., Lu D. et al.: Carbon 2019, 144, 433. https://doi.org/10.1016/j.carbon.2018.12.064
  • [11] Chen M., Jing Q.S., Sun H.B. et al.: Langmuir 2019, 35(19), 6321. https://doi.org/10.1021/acs.langmuir.9b00558
  • [12] Guo F., Kang T., Liu Z. et al.: Nano Letters 2019, 19(9), 6377. https://doi.org/10.1021/acs.nanolett.9b02560
  • [13] Medupin R.O., Abubakre O.K., Abdulkareem A.S. et al.: Scientific Reports 2019, 9(1), 1. https://doi.org/10.1038/s41598-019-56778-0
  • [14] Abidin M.S., Herceg T., Greenhalgh E.S. et al.: Composites Science and Technology 2019, 170, 85. https://doi.org/10.1016/j.compscitech.2018.11.017
  • [15] Feng D., Xu D., Wang Q., Liu P.: Journal of Materials Chemistry C 2019, 7(26), 7938. https://doi.org/10.1039/C9TC02311A
  • [16] Zhou E., Xi J., Guo Y. et al.: Carbon 2018, 133, 316. https://doi.org/10.1016/j.carbon.2018.03.023
  • [17] Souto L.F., Soares B.G.: Progress in Organic Coatings 2020, 143, 105598. https://doi.org/10.1016/j.porgcoat.2020.105598
  • [18] Hassan A.G., Yajid M.M., Saud S.N. et al.: Surface and Coatings Technology 2020, 401, 126257. https://doi.org/10.1016/j.surfcoat.2020.126257
  • [19] Chen M., Wang G.C., Yang W.Q. et al.: ACS Applied Materials and Interfaces 2019, 11(45), 42156. https://doi.org/10.1021/acsami.9b14316
  • [20] Chen M., Wang G.C., Shao L.L. et al.: ACS Applied Materials and Interfaces 2018, 10(37), 31208. https://doi.org/10.1021/acsami.8b08489
  • [21] Chen M., Zhao G., Shao L.L. et al.: Chemistry of Materials 2017, 29(22), 9680. https://doi.org/10.1021/acs.chemmater.7b03385
  • [22] Chen M., Shao L.L., Lv X.W. et al.: Chemical Engineering Journal 2020, 390, 124633. https://doi.org/10.1016/j.cej.2020.124633
  • [23] Janudin N., Abdullah N., Yasin F.M. et al.: ZULFAQAR Journal of Defence Science, Engineering and Technology 2018, 1(2). https://zulfaqarjdset.upnm.edu.my/index.php/zjdset/article/view/7
  • [24] Janudin N., Abdullah N., Wan Yunus W.M. et al.: Journal of Nanotechnology 2018, article ID 2107898. https://doi.org/10.1155/2018/2107898
  • [25] Maity D., Rajavel K., Kumar R.T.: Sensors and Actuators B: Chemical 2018, 261, 297. https://doi.org/10.1016/j.snb.2018.01.152
  • [26] Schroeder V., Savagatrup S., He M. et al.: Chemical Reviews 2018, 119(1), 599. https://doi.org/10.1021/acs.chemrev.8b00340
  • [27] Kasim N.A., Abdullah N., Yasin F.M. et al.: Materials Today: Proceedings 2019, 19, 1459. https://doi.org/10.1016/j.matpr.2019.11.169
  • [28] Norizan M.N., Zulaikha N.S., Norhana A.B. et al.: Polimery 2021, 66(3), 175. https://doi.org/10.14314/polimery.2021.3.3
  • [29] Nurazzi N.M., Harussani M.M., Zulaikha N.S. et al.: Polimery 2021, 66(2), 85. https://doi.org/10.14314/polimery.2021.2.1
  • [30] Yahya M.S., Ismail M.: The Journal of Physical Chemistry C 2018, 122(21), 11222. https://doi.org/10.1021/acs.jpcc.8b02162
  • [31] Mananghaya M., Yu D., Santos G.N., Rodulfo E.: Scientific Reports 2016, 6(1), 1. https://doi.org/10.1038/srep27370
  • [32] Park S., Gupta A.P., Yeo S.J. et al.: Nanomaterials 2018, 8(6), 378. https://doi.org/10.3390/nano8060378
  • [33] Song Y., Li J., Wu Q. et al.: Journal of Alloys and Compounds 2020, 816, 152648. https://doi.org/10.1016/j.jallcom.2019.152648
  • [34] Ma P.C., Siddiqui N.A., Marom G., Kim J.K.: Composites Part A: Applied Science and Manufacturing 2010, 41(10), 1345. https://doi.org/10.1016/j.compositesa.2010.07.003
  • [35] Mohd Saidi N., Norizan M.N., Abdullah N. et al.: Nanomaterials 2022, 12(7), 1071. https://doi.org/10.3390/nano12071071
  • [36] Rubel R.I., Ali M.H., Jafor M.A., Alam M.M.: AIMS Materials Science 2019, 6(5), 756. https://doi.org/10.3934/matersci.2019.5.756
  • [37] Sabet S.M., Mahfuz H., Terentis A.C. et al.: Journal of Materials Science 2018, 53(12), 8963. https://doi.org/10.1007/s10853-018-2182-y
  • [38] Nurazzi N.M., Sabaruddin F.A., Harussani M.M. et al.: Nanomaterials 2021, 11(9), 2186. https://doi.org/10.3390/nano11092186
  • [39] Husain A., Shariq M.U., Mohammad F.: Materialia 2020, 9, 100599. https://doi.org/10.1016/j.mtla.2020.100599
  • [40] Zhao Y.L., Stoddart J.F.: Accounts of Chemical Research 2009, 42(8), 1161. https://doi.org/10.1021/ar900056z
  • [41] Li X., Zhu Z., Wang T. et al.: Composites Communications 2019, 12, 128. https://doi.org/10.1016/j.coco.2019.01.009
  • [42] Husain A., Ahmad S., Mohammad F.: Materials Chemistry and Physics 2020, 239, 122324. https://doi.org/10.1016/j.matchemphys.2019.122324
  • [43] Rathore P., Negi C.M., Yadav A. et al.: Optik 2018, 160, 131. https://doi.org/10.1016/j.ijleo.2018.01.092
  • [44] Saini V., Li Z., Bourdo S. et al.: The Journal of Physical Chemistry C 2009, 113(19), 8023. https://doi.org/10.1021/jp809479a
  • [45] Mescoloto A.D., Pulcinelli S.H., Santilli C.V., Gonçalves V.C.: Polímeros 2014, 24, 25. http://dx.doi.org/10.4322/polimeros.2014.04
  • [46] Karim M.R.: Journal of Nanomaterials 2012, article ID 174353. https://doi.org/10.1155/2012/174353
  • [47] Husain A., Ahmad S., Mohammad F.: Polymers and Polymer Composites 2021, 29(6), 605. https://doi.org/10.1177/0967391120929079
  • [48] Agbolaghi S.: Iranian Journal of Materials Science and Engineering 2020, 17(2), 39. https://doi.org/10.22068/ijmse.17.2.39
  • [49] Mahakul P.C., Sa K., Subramanyam B.V. et al.: Journal of Materials Science 2018, 53(11), 8151. https://doi.org/10.1007/s10853-018-2161-3
  • [50] Das A.K., Bhowmik R., Meikap A.K.: AIP Advances 2017, 7(4), 045110. https://doi.org/10.1063/1.4980051
  • [51] Tai C.K., Yeh P.L., Chang C.C. et al.: Research on Chemical Intermediates 2014, 40(6), 2355. https://doi.org/10.1007/s11164-014-1612-y
  • [52] Norizan M.N., Mohamed R.: Jurnal Teknologi 2017, 79(2). https://doi.org/10.11113/jt.v79.8436
  • [53] Riaz A., Usman A., Faheem M. et al.: International Journal of Electrochemical Science 2017, 12(3), 1785. https://doi.org/10.20964/2017.03.20
  • [54] Rasheed H.K., Kareem A.A.: Journal of Optical Communications 2021, 42(1), 25. https://doi.org/10.1515/joc-2018-0024
  • [55] Bafandeh N., Larijani M.M., Shafiekhani A. et al.: Chinese Physics Letters 2016, 33(11), 117801. https://doi.org/10.1088/0256-307X/33/11/117801
  • [56] Swamy N.K., Sandeep S., Santhosh A.S.: Indian Journal of Advances in Chemical Science S2 2017, 6, 9. DOI:10.22607/IJACS.2017.S02002
  • [57] Saleh M.A., Jawad M.K.: IOP Conference Series: Materials Science and Engineering 2020, 928, 072140. https://doi.org/10.1088/1757-899X/928/7/072140
  • [58] Kadem B., Alfahed R.F., Al-Asadi A.S., Badran H.A.: Optik 2020, 204, 164153. https://doi.org/10.1016/j.ijleo.2019.164153
  • [59] Anyaegbunam F.N., Augustine C.: Digest Journal of Nanomaterials and Biostructures 2018, 13, 847. Received 7 IV 2022.
Uwagi
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-833aa057-3384-46b6-82ba-ff44ef965fc1
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.