Nanoporowata struktura tlenku aluminium w anodyzacji jedno i dwuetapowej

• Autorzy: Juchim S.

Warianty tytułu

EN

Nanoporous structure of alumina in one- and two-step anodisation process

• Języki publikacji: PL

Abstrakty

PL

W artykule porównano parametry fizyczne nanoporowatej matrycy z tlenku aluminium wykonanej w technice dwuetapowej, z parametrami podobnej matrycy uzyskanej w uproszczonej technologii jednoetapowej. Analizie poddano przebieg zmian parametrów elektrycznych obwodu anodyzacji w obu technologiach a także przeprowadzono obrazowanie powierzchni za pomocą mikroskopu typu FE-SEM.

EN

In the paper is presented a comparison of physical parameters of alumina template made by use of one (simplified) and two-step anodisation. The analyze was taken on the electrical parameters of anodisation circuits of both of the technologies and the visualization of surface was carried on by means of FE-SEM microscope.

Słowa kluczowe

PL

anodowanie; tlenek aluminium; nanotechnologia; pory; utlenianie; matryca

EN

anodisation; alumina; pores; oxidation; nanotechnology; template

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2013
• Tom: R. 89, nr 7
• Strony: 155--157
• Opis fizyczny: Bibliogr. 18 poz., rys., wykr.

Twórcy

autor

Juchim S.

• Instytut Elektrotechniki Oddział Technologii i Materiałoznawstwa Elektrotechnicznego we Wrocławiu

Bibliografia

• [1] Xiea K., Pana Y., Yao M., Xin C., Osmanbeyoglua U.H., Hurb T. B., Kimb H. K., “Thin alumina nanoporous membranes for similar size biomolecule separation”, Journal of Membrane Science 343 (2009) 1–6
• [2] Hua Z.H., Li X.C., Qu F.M., Zhou H.J., Liu L., Zhou Q., Zhang L., Wang H., Feng M., Wang Y.F., Cao X.W. ,“Investigation of the super-long alumina nanowire array synthesized with a novel metod”, Solid State Communications 149 (2009) 1782_1785
• [3] Tsuchiya H., Berger S., Macak J. M., Munoz A. G., Schmuki P., “A new route for the formation of self-organized anodic porous alumina in neutral electrolytes”, Electrochemistry Communications 9 (2007) 545–550
• [4] Jung M., Byung-KeunOh, Jeong-WooChoi, “Fabrication of Au nanodots with 60nm diameter on ITO glass: Towards nano biochip using nanoporous alumina mask”, Ultramicroscopy 109(2009)1006–1010
• [5] Pribat D., Cojocaru C.S., Gowthama M., Marquardt B., Wadeb T., Wegroweb J.E., Kim B.S., “Organisation of carbon nanotubes and semiconductor nanowires using lateral alumina templates”, C. R. Physique 10 (2009) 320–329
• [6] Zaraska L., Sulka G. D., Szeremeta J., Jaskuła M., „Porous anodic alumina formed by anodization of aluminum alloy (AA1050) and high purity aluminum”, Electrochimica Acta 55 (2010) 4377–4386
• [7] Sulka G. D., Brzózka A., Zaraska L., Jaskuła M., „Through-hole membranes of nanoporous alumina formed by anodizing in oxalic acid and their applications in fabrication of nanowire arrays “,Electrochimica Acta 55 (2010) 4368–4376
• [8] Zaraska L., Sulka G. D., Jaskuła M., „The effect of n-alcohols on porous anodic alumina formed by self-organized two-step anodizing of aluminum in phosphoric acid”, Surface & Coatings Technology 204 (2010) 1729–1737
• [9] Overmeere Q., Blaffart F., Proost J., “What controls the pore spacing in porous anodic oxides?”, Electrochemistry Communications 12 (2010) 1174–1176
• [10] Salerno M., Patra N., Losso R., Cingolani R., “Increased growth rate of anodic porous alumina by use of ionic liquid as electrolyte additive”, Materials Letters 63 (2009) 1826–1829
• [11] Jagminas A., Mazeika K., Reklaitis J., Pakstas V., Baltrunas D., “Annealing effects on the transformations of Fe nanowires encapsulated in the alumina template pores”, Materials Chemistry and Physics 115 (2009) 217–222
• [12] Jaafar M., Navas D., Hernández-Vélez M., Baldonedo J.L., Vázquez M., Asenjo A., “Nanoporous alumina membrane prepared by nanoindentation and anodic oxidation”, Surface Science 603 (2009) 3155–3159
• [13] Bertholdo R., Assis M.C., Hammer P., Pulcinelli S.H., Santilli C.V., “Controlled growth of anodic aluminium oxide films with hexagonal array of nanometer-sized pores filled with textured copper nanowires“, Journal of the European Ceramic Society 30 (2010) 181–186
• [14] Cheng Ch., Ngan A.H.W.,” Modelling and simulation of selfordering in anodic porous alumina “Electrochimica Acta 56 (2011) 9998– 10008
• [15] Patermarakis G., Moussoutzanis K., „Development and application of a holistic model for the steady state growth of porous anodic alumina films”, Electrochimica Acta 54 (2009) 2434–2443
• [16] Hidetaka A., Kota U., Sachiko O., „Structural features of anodic oxide films formed on aluminum substrate coated with selfassembled microspheres”, Corrosion Science 51 (2009) 1496– 1500
• [17] Gaponenko N.V., Hluzd Y.V., Maliarevich G.K., Molchan I.S., Thompson G.E., Dabboussi S., Elhouichet H., Prislopski S.Y., Lutich A.A., “Room-temperature photoluminescence from porous anodic alumina films with embedded terbium and europium species” Materials Letters 63 (2009) 621–624
• [18] Gultepe E., Nagesha D., Srinivas S., Mansoor W., “Nanoporous inorganic membranes or coatings for sustained drug delivery in implantable devices”, Advanced Drug Delivery Reviews 62 (2010) 305–315