A Comparative Study of Nanocrystalline Fe_38.5Co_38.5 Nb₇ P₁₅Cu₁ Alloys Obtained by Mechanical Alloying and Rapid Quenching

• Autorzy: Cotai Ana , Miraglia Salvatore , Neamtu Bogdan Viorel , Marinca Traian Florin , Chicinaș Horea F. , Isnard Olivier , Chicinaș Ionel

Identyfikatory

DOI

10.24425/amm.2022.137790

• Języki publikacji: EN

Abstrakty

EN

This paper presents a comparative study of the preparation and characterisation of Fe_38.5Co_38.5 Nb₇ P₁₅Cu₁ alloy produced by mechanical alloying (MA) and rapid quenching (RQ) method. In order to obtain the starting mixture (SS) in the present study, we opted for the replacement of elemental Nb and P powders with ferroalloy powders of niobium and phosphorus. Benzene was used as a control agent of the process (PCA) for wet MA. The samples obtained (powders and ribbons) were characterised by X-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), X-ray microanalysis (EDX), magnetic measurements M(H) and thermomagnetic measurements M(T). After 40 h of wet MA, the alloy was partially amorphous, and the ribbons obtained by RQ do not show an amorphous state. Also, the magnetic measurements show the influence of the method used on the magnetic properties.

Słowa kluczowe

EN

mechanical alloying; melt-spinning; ribbons; magnetisation; ferroalloys

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2022
• Tom: Vol. 67, iss. 2
• Strony: 555--561
• Opis fizyczny: Bibliogr. 29 poz., fot., rys.

Twórcy

autor

Cotai Ana

• Technical University of Cluj-Napoca, Materials Science and Engineering Department, 103-105 Muncii Ave., 400641 Cluj-Napoca, Romania
• Institut Néel, CNRS / Université Grenoble Alpes, 25 rue des Martyrs, BP166, 38042 Grenoble, Cédex 9, France

• https://orcid.org/0000-0002-0250-1293

autor

Miraglia Salvatore

• Institut Néel, CNRS / Université Grenoble Alpes, 25 rue des Martyrs, BP166, 38042 Grenoble, Cédex 9, France

• https://orcid.org/0000-0003-1072-7978

autor

Neamtu Bogdan Viorel

• Technical University of Cluj-Napoca, Materials Science and Engineering Department, 103-105 Muncii Ave., 400641 Cluj-Napoca, Romania

• https://orcid.org/0000-0003-0666-8303

autor

Marinca Traian Florin

• Technical University of Cluj-Napoca, Materials Science and Engineering Department, 103-105 Muncii Ave., 400641 Cluj-Napoca, Romania

• https://orcid.org/0000-0002-5531-5451

autor

Chicinaș Horea F.

• Technical University of Cluj-Napoca, Materials Science and Engineering Department, 103-105 Muncii Ave., 400641 Cluj-Napoca, Romania
• Guhring Romania, Constructurilor Street 30, Apahida 407035, Romania

• https://orcid.org/0000-0001-7150-8029

autor

Isnard Olivier

• Institut Néel, CNRS / Université Grenoble Alpes, 25 rue des Martyrs, BP166, 38042 Grenoble, Cédex 9, France

• https://orcid.org/0000-0002-7930-4378

autor

Chicinaș Ionel

• Technical University of Cluj-Napoca, Materials Science and Engineering Department, 103-105 Muncii Ave., 400641 Cluj-Napoca, Romania

• https://orcid.org/0000-0002-6371-0689

Bibliografia

• [1] F. C. Li, T. Liu, J.Y. Zhang, S. Shuang, Q. Wang, A.D. Wang, J.G. Wang., Mater. Today Adv. 4, 100027 (2019).
• [2] C. Suryanarayana, C.C. Koch, Hyperfine Interact. 130 (1-4), 5-44 (2000).
• [3] M.L. Trudeau, J.Y. Ying, Nanostructured Mater. 7 (1-2), 245-258 (1996).
• [4] K.S. Kumar, H. Van Swygenhoven, S. Suresh, Acta Mater. 51 (19), 5743-5774 (2003).
• [5] Y. Yoshizawa, S. Oguma, K. Yamauchi, J. Appl. Phys. 64, 6044-6046 (1988).
• [6] K. Suzuki, A. Makino, N. Kataoka, A. Inoue, T. Masumoto, Mater. Trans. Jim 32 (1), 93-102 (1991).
• [7] M.A. Willard et al., J. Appl. Phys. 84 (12), 6773-6777 ( 1998).
• [8] J.E. May, M.F. De Oliveira, S.E. Kuri, Mater. Sci. Eng. 361, 179-184 (2003).
• [9] M.E. McHenry, M.A. Willard, D.E. Laughlin. 44 (4), (1999).
• [10] M.M. Gasik, Introduction, Twelfth Ed. Elsevier, (2013).
• [11] K. Tanaka, Energy Policy 36 (8), 2887-2902 (2008).
• [12] C. Suryanarayana A. Inoue, Bulk Metallic Glasses, CRC Press, New York 2011.
• [13] C.C. Koch, Mater. Sci. Eng. A 244 (1), P. 39-48, 1998.
• [14] B.V. Neamţu, O. Isnard, I. Chicinaş, C. Vagner, N. Jumate, P. Plaindoux, Mater. Chem. Phys. 125 (3), 364-369 (2011).
• [15] J.Y. Huang, Y.K. Wu, H.Q. Ye, Appl. Phys. Lett. 44 (3), 308 (1995).
• [16] B.V. Neamţu, H.F. Chicinaş, T.F. Marinca, O. Isnard, I. Chicinaş, J. Alloys Compd. 673, 80-85(2016).
• [17] A. Cotai, B.V. Neamţu, F. Popa, T.F. Marinca, O. Isnard, I. Chicinaş, J. Alloys Compd. 880, 160497 (2021).
• [18] S. Souilah, S. Alleg, C. Djebbari, R. Bensalem, J.J. Suñol, Mater. Chem. Phys. 132 (2-3), 766-772 (2012).
• [19] Y. Kato, M. Ito, Y. Kato, O. Furukimi, Mater. Trans. 51 (9), 1531-1535 (2010).
• [20] B.V. Neamţu, H.F. Chicinaş, T.F. Marinca, O. Isnard, O. Pană, I. Chicinaş, Mater. Chem. Phys. 183, 83-92 (2016).
• [21] C. Turk, H. Leitner, G. Kellezi, H. Clemens, W.M. Gan, P. Staron, S. Primig., Mater. Sci. Eng. A 662, 511-518 (2016).
• [22] A.I. Zaitsev, Z.V. Dobrokhotova, A.D. Litvina, B.M. Mogutnov, J. Chem. Soc. Faraday Trans. 91, 703-712.
• [23] N.S. Kazama, T. Masumoto, M. Mitera, J. Magn. Magn. Mater. 15-18, 1331-1335 (1980).
• [24] C. Suryanarayana, Prog. Mater. Sci. 46 (1-2), 1-184 (2001).
• [25] O. Isnard, D. Fruchart, J. Alloys Compd. 205 (1-2), 1-15 (1994).
• [26] C. Chacon, O. Isnard, J. Appl. Phys. 89 (1), 71-75 (2001).
• [27] A.H. Taghvaei et al., Mater. Chem. Phys. 134 (2-3),1214-1224 (2012).
• [28] A. Nouri A, C. Wen, Crit. Rev. Solid State Mater. Sci. 39 (2), 81-108 (2014).
• [29] B.V. Neamţu, T.F. Marinca, I. Chicinaş, O. Isnard, J. Alloys Compd. 626, 49-55 (2015).

Uwagi

1. This paper was supported by the Project “Entrepreneurial competencies and excellence research in doctoral and postdoctoral programs - ANTREDOC”, project co-funded by the European Social Fund. Also, these results were partially supported by the Romanian Ministry of Research and Innovation by project 21 PFE in the frame of the programme PDI-PFE-CDI 2018, and by the European Development Fund and the Romanian Government through the Competitiveness Operational Programme 2014-2020, project ID P 34 466, MySMIS code 121349, contract no. 5/05.06.2018

2. Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).