Technical Feasibility of the Reuse of Dry Concrete Slurry Waste in Concrete Fabrication

• Autorzy: Naamane Sara , Alaoui Mohamed Saidi Hassani , Taleb Mustapha , Rais Zakia

Identyfikatory

DOI

10.12912/27197050/186617

• Języki publikacji: EN

Abstrakty

EN

Concrete slurry waste (CSW) is an industrial by-product retrieved in large quantities from ready-mix concrete plants. The present work aims to study the feasibility of the incorporation of this residue in the production of concrete to reduce the dilemma of its disposal on huge amounts, decrease the quantities of natural materials used in concrete assembly and produce a lower carbon footprint concrete. Hence, the CSW were divided into three parts, the first part contains the fraction of fine particles (< 80 µm) (residue 1), the second part contains the entire CSW (residue 2) and the third part contains the rest of CSW after the elimination of residue 1 by sieving (residue 3). Then, the introduction of CSW into concrete was achieved, on one hand, by replacing 2, 4, 6, 8 and 10% of cement by residue 1 and, on the other hand, by substituting 5, 10, 15, 20 and 25% of river sand and crushed sand by residues 2 and 3, separately. In order to qualify and analyze the behavior of this residues in the company of other components of concrete, several chemical and physical characteristics of CSW were evaluated. In addition, CSW were characterized by x-ray fluorescence (XRF), x-ray diffraction (XRD), fourier transform infrared spectrometer (FTIR) and scanning electron microscopy (SEM). The various constituents used in the manufacturing of concrete were characterized physically including particle size distribution, fineness modulus, cleanliness of the sand, flattening coefficient, hardness, apparent density and actual density to conclude the formulation used for the development of the specimens. In addition, the properties of fresh and hardened concretes were also investigated, including Abrams cone subsidence, density and compressive strength. The outcome of this study concludes that modest amounts of CSW improve the physical properties of concretes and consequently their compressive strength, especially at 90 days, whatever the type of martial being substituted. Thus, the introduction of residue 1 into the cement must not exceed 2%, the replacement of residue 2 by river and crushed sands can be done at rates up to 5 and 10%, respectively, while the residue 3 can only substitute river sand at a rate up to 10%.

Słowa kluczowe

EN

concrete slurry waste; concrete; physical-chemical; mineralogical characteristics; compressive strength

• Wydawca: Lubelski Oddział Polskiego Towarzystwo Inżynierii Ekologicznej ; Lublin University of Technology ; WNGB Wydawnictwo Naukowe
• Czasopismo: Ecological Engineering & Environmental Technology
• Rocznik: 2024
• Tom: Vol. 25, iss. 6
• Strony: 123--136
• Opis fizyczny: Bibliogr. 53 poz., rys., tab.

Twórcy

autor

Naamane Sara

• Laboratory of Engineering Sciences and Applications, National School of Applied Sciences, Abdelmalek Essaadi University, 32003, Al-Hoceima, Morocco
• Laboratory of Engineering of Electrochemistry, Modeling and Environment, Faculty of Sciences Dhar El Mehraz, Sidi Mohamed Ben Abdellah University, 30000, Fes, Morocco

• https://orcid.org/0000-0002-9981-7488

autor

Alaoui Mohamed Saidi Hassani

• Laboratory of Engineering Sciences and Applications, National School of Applied Sciences, Abdelmalek Essaadi University, 32003, Al-Hoceima, Morocco

autor

Taleb Mustapha

• Laboratory of Engineering of Electrochemistry, Modeling and Environment, Faculty of Sciences Dhar El Mehraz, Sidi Mohamed Ben Abdellah University, 30000, Fes, Morocco

• https://orcid.org/0000-0002-3063-5926

autor

Rais Zakia

• Laboratory of Engineering of Electrochemistry, Modeling and Environment, Faculty of Sciences Dhar El Mehraz, Sidi Mohamed Ben Abdellah University, 30000, Fes, Morocco

• https://orcid.org/0000-0001-8951-2376

Bibliografia

• 1. Audo M., Mahieux P.Y., Turcry P. 2016. Utilization of sludge from ready-mixed concrete plants as a substitute for limestone fillers. Construct. Build. Mater., 112, 790–799.
• 2. Cao C. 2023. Prediction of concrete porosity using machine learning. Results Eng., 17, 100794.
• 3. Chen X., Wu J., Ning Y., Zhang W. 2022. Experimental study on the effect of wastewater and waste slurry of mixing plant on mechanical properties and microstructure of concrete. J. Build. Eng., 52, 104307.
• 4. Correia S.L., Souza F.L., Dienstmann G., Segadaes A.M. 2009. Assessment of the recycling potential of fresh concrete waste using a factorial design of experiments. Waste Manag., 29(11), 2886–2891.
• 5. Frohard F. 2014. Durabilité des éco-bétons : impact d’additions cimentaires alternatives sur la corrosion des armatures dans les bétons armés. Ph.D. Thesis, Université Paris-Est, France.
• 6. Garikapati K.P., Sadeghian P. 2020. Mechanical behavior of flax-lime concrete blocks made of waste flax shives and lime binder reinforced with jute fabric. J. Build. Eng., 29, 101187.
• 7. Hossain M.U., Xuan D., Poon C.S. 2017. Sustainable management and utilisation of concrete slurry waste: a case study in Hong Kong. Waste Manag., 61, 397–404.
• 8. Iizuka A., Sakai Y., Yamasaki A., Honma M., Hayakawa Y., Yanagisawa Y. 2012a. Bench-scale operation of a concrete sludge recycling plant. Ind. Eng. Chem. Res., 51(17), 6099–6104.
• 9. Iizuka A., Sasaki T., Hongo T., Honma M., Hayakawa Y., Yamasaki A., Yanagisawa Y. 2012b. Phosphorus adsorbent derived from concrete sludge (PAdeCS) and its phosphorus recovery performance. Ind. Eng. Chem. Res., 51(34), 11266–11273.
• 10. Iizuka A., Sasaki T., Honma M., Yoshida H., Hayakawa Y., Yanagisawa Y., Yamasaki A. 2017. PilotScale operation of a concrete sludge recycling plant and simultaneous production of calcium carbonate. Chem. Eng. Commun., 204(1), 79–85.
• 11. Jiang Y., Li L., Lu J.X., Shen P., Ling T.C., Poon C. S. 2022. Mechanism of carbonating recycled concrete fines in aqueous environment: the particle size effect. Cem. Concr. Compos., 133, 104655.
• 12. Keppert M., Davidová V., Doušová B., Scheinherrová L., Reiterman P. 2021. Recycling of fresh concrete slurry waste as supplementary cementing material: characterization, application and leaching of selected elements. Constr. Build. Mater., 300, 124061.
• 13. Kochova K., Schollbach K., Gauvin F., Brouwers H.J.H. 2017. Effect of saccharides on the hydration of ordinary Portland cement. Constr. Build. Mater., 150, 268–275.
• 14. Kou S.C., Zhan B.J., Poon C.S. 2012a. Feasibility study of using recycled fresh concrete waste as coarse aggregates in concrete. Construct. Build. Mater., 28(1), 549–556.
• 15. Kou S.C., Zhan B.J., Poon C.S. 2012b. Properties of partition wall blocks prepared with fresh concrete wastes. Construct. Build. Mater., 36, 566–571.
• 16. Naamane S., Rais Z., Mtarfi N.H., El Haji M., Taleb M. 2014. Valorization of wastewater sludge in cement CPJ45. Phys. Chem. News, 74, 44–50.
• 17. Naamane S., Rais Z., Taleb M. 2016. The effectiveness of the incineration of sewage sludge on the evolution of physicochemical and mechanical properties of Portland cement. Constr. Build. Mater., 112, 783–789.
• 18. NF ISO 11465. 1994. Soil quality - Determination of dry matter and water weight content - Gravimetric method. https://www.boutique.afnor.org/fr-fr/resultats?Keywords=NF+ISO+11465&StandardStateIds=1.
• 19. NF P18-513. 2012. Addition for hydraulic concrete - Metakaolin - Specifications and conformity criteria. https://www.boutique.afnor.org/fr-fr/resultats?Keywords=NF+P18-513&StandardStateIds=1.
• 20. NF P18-555. 1980. Aggregates - Measurement of densities, absorption coefficient and water content of fine aggregates. https://www.boutique.afnor.org/ fr-fr/norme/p18555/granulats-mesures-des-massesvolumiques-coefficient-dabsorption-et-teneur-e/fa021241/56192#AreasStoreProductsSummaryView
• 21. NF P94-055. 1993. Soils: recognition and tests - Determination of the weight content of organic matter in a soil - Chemical method. https://www.boutique.afnor.org/fr-fr/resultats?Keywords=2.%09NF+P94- 055&StandardStateIds=1
• 22. NM 10.1.004. 2019. Hydraulic binders – Cements and cement constituents – Composition, specifications and conformity criteria – conformity assessment – quality control on delivery. Certification rules NM cement. Second version.
• 23. NM 10.1.005. 2008. Hydraulic binders – Testing techniques. Certification rules NM aggregates for hydraulic concrete. First version.
• 24. NM 10.1.008. 2007. Concrete: Specifications, performance, production and compliance. Certification rules NM hollow concrete body for reinforced concrete floors, First version.
• 25. NM 10.1.051. 2008. Test for hardened concrete - Compressive strength of specimens. Certification rules ready-mixed concrete. First version.
• 26. NM 10.1.061. 2008. Test for fresh concrete - Slump test. Certification rules ready-mixed concrete. First version.
• 27. NM 10.1.068. 2007. Test for hardened concrete - Preparation and conservation of specimens for resistance tests. Certification rules ready-mixed concrete. First version.
• 28. NM 10.1.072. 2008. Test for hardened concrete - Density of concrete. Certification rules ready-mixed concrete. First version.
• 29. NM 10.1.138. 1995. Aggregates - Los Angeles Test. Certification rules NM hollow concrete body for reinforced concrete floors, First version.
• 30. NM 10.1.146. 1995. Aggregates – Measurement of specific masses, porosity, absorption coefficient and water content of gravel and pebbles. Certification rules NM aggregates for hydraulic concrete. First version.
• 31. NM 10.1.147. 1995. Aggregates - Equivalent to sand. Certification rules NM hollow concrete body for reinforced concrete floors, First version.
• 32. NM 10.1.149. 1995. Aggregates – Measurement of specific masses, absorption coefficient and water content of sands. Certification rules NM aggregates for hydraulic concrete. First version.
• 33. NM 10.1.155. 2008. Tests to determine the geometric characteristics of aggregates – Determination of the shape of aggregates – Measurement of the flattening coefficient. Certification rules NM aggregates for hydraulic concrete. First version.
• 34. NM 10.1.169. 2020. Aggregates - Determination of surface cleanliness. Certification rules NM aggregates for hydraulic concrete. First version.
• 35. NM 10.1.271. 2008. Aggregates for Hydraulic Concretes. Certification rules NM aggregates for hydraulic concrete. First version.
• 36. NM 10.1.700. 2008. Tests to determine the geometric characteristics of aggregates - Determination of granularity - Particle size analysis by sieving. Certification rules NM aggregates for hydraulic concrete. First version.
• 37. NM 10.1.732. 2009. Aggregates - Determination of sand cleanliness: equivalent. Certification rules NM aggregates for hydraulic concrete. First version.
• 38. Nunes S., Costa C. 2021. Self-compacting concrete also standing for sustainable circular concrete. Waste and Byproducts in Cement-Based Materials, 439–480.
• 39. Patil C., Manjunath M., Hosamane S., Bandekar S., Athani R. 2021. Pozzolonic Activity and Strength Activity Index of Bagasse Ash and Fly Ash Blended Cement Mortar. Mater. Today Proc., 42(2), 1456–1461.
• 40. Rajput S.P.S. 2018. An Experimental study on Crushed Stone Dust as Fine Aggregate in Cement Concrete. Mater. Today Proc., 5(9), 3, 17540–17547.
• 41. Sealey B.J., Phillips P.S., Hill G.J. 2001. Waste management issues for the UK ready mixed concrete industry. Resour. Conserv. Recycl., 32(3), 321–331.
• 42. Tam V.W.Y. 2008. Economic comparison of concrete recycling: a case study approach. Resour. Conserv. Recycl., 52(5), 821–828.
• 43. Tang P., Xuan D., Cheng H.W., Poon C.S., Tsang D.C.W. 2020. Use of CO2 curing to enhance the properties of cold bonded lightweight aggregates (CBLAs) produced with concrete slurry waste (CSW) and fine incineration bottom ash (IBA). J. Hazard Mater., 381, 120951.
• 44. Tian Q. 2007. Preparation and properties of glassceramics made from concrete sludge. Rare Metal Mater. Eng., 36, 979.
• 45. Tsunashima Y., Iizuka A.,Akimoto J., Hongo T.,Yamasaki A. 2012. Preparation of sorbents containing ettringite phase from concrete sludge and their performance in removing borate and fluoride ions from waste water. Chem. Eng. J., 200, 338–343.
• 46. Wang L., Wang J., Wang H., Fang Y., Shen W., Chen P., Xu Y. 2022. Eco-friendly treatment of recycled concrete fines as supplementary cementitious materials. Constr. Build. Mater., 322, 126491.
• 47. Wang R., Zhang Y.X. 2018. Recycling fresh concrete waste: a review. Struct. Concr., 19(6), 1939–1955.
• 48. Xuan D., Zhan B., Poon C.S., Zheng W. 2016a. Innovative reuse of concrete slurry waste from ready-mixed concrete plants in construction products. J. Hazard Mater., 312, 65–72.
• 49. Xuan D., Zhan B., Poon C.S., Zheng W. 2016b. Carbon dioxide sequestration of concrete slurry waste and its valorisation in construction products. Constr. Build. Mater., 113 664–672.
• 50. Yang Z.X., Ha N.R., Jang M.S., Hwang K.H., Jun B.S., Lee J.K. 2010. The Performance of Geopolymer Based on Recycled Concrete Sludge. Ceramic Materials and Components for Energy and Environmental Applications, 221–224.
• 51. Yoo J., Shin H., Ji S. 2017. An eco-friendly neutralization process by carbon mineralization for Carich alkaline wastewater generated from concrete sludge. Metals, 7(9), 371.
• 52. Zervaki M., Leptokaridis C., Tsimas S., Sustain J. 2013. Reuse of by-products from ready-mixed concrete plants for the production of cement mortars. Develope. Energy Water Environ. Syst., 1(2), 152–162.
• 53. Zhang J., Fujiwara T., 2007. Concrete sludge powder for soil stabilization. Transport. Res. Rec., 2026(1), 54–59.