Steel frame as the basis for checking the pull-out capacity of bonded diagonal anchor bolts

• Autorzy: Tomaszewicz D.
• Języki publikacji: EN

Abstrakty

EN

The paper concerns a device for testing diagonal anchorages, designed by the author. This device constitutes the basis for the testing equipment used for the performed test. No such research has been conducted so far. The article describes the way the rack was designed and what components it is made of. The possibilities and practical examples of the device are also indicated.

Słowa kluczowe

EN

steel frame; capacity; pull out; diagonal anchor bolt; hydraulic cylinder; bonded anchor

PL

rama stalowa; pojemność; przekątna śruby kotwiącej; cylinder hydrauliczny; przyklejona kotwica

• Wydawca: Oficyna Wydawnicza Politechniki Białostockiej
• Czasopismo: Budownictwo i Inżynieria Środowiska
• Rocznik: 2018
• Tom: Vol. 9, no. 1
• Strony: 39--44
• Opis fizyczny: Bibliogr. 17 poz., rys., tab.

Twórcy

autor

Tomaszewicz D.

• Faculty of Technics, Higher School of Agribusiness, Studencka 19, 18-402 Łomża, Poland

Bibliografia

• Červenka V., Pukl R., R. Eligehausen (1991). Fracture analysis of concrete plane-stress pull-out tests. Institut für Werkstoffe im Bauwesen. RILEM. E. & F. N. Spon, London, 899-908.
• Dębowski J. (2012). Typical damages in buildings of panel. Przegląd Budowlany, 10/2012, 25-32. (in Polish)
• German J. (2011). Fracture mechanics base. Cracow University of Technology, Cracow. (in Polish)
• Garbacz A., Courard L., Bissonnette B. (2013). A surface engineering approach applicable to concrete repair engineering. Bulletin of the Polish Academy of Sciences Technical Sciences, Vol. 61, No. 1, 73-84.
• Gronostajska B. (2010). Slabs housing estates in 21st Century – problems and prospects. Architecturae et Artibus, Vol. 2, No. 2, 19-26.
• Karmazínová M., Melcher J. (2012). Verification of Steel-toConcrete Anchorage System Reliability Based on Failure Probability Evaluation Using Test Results. In Advances in Mathematical and Computational Methods – Proceedings of the 14th WSEAS International Conference „MACMESE '12“. Sliema: WSEAS Press. 247-252.
• Mazurkiewicz Ł., Małachowski J., Damaziak K., Baranowski P., Gotowicki P. (2013). Identyfication of layers distribution in the composite coupon using Finite Element Method and three point bending test. Acta Mechanica et Automatica, Vol. 7, No.3, 160-165.
• Nakano K., Matsuzaki Y., Sugiyama T. (2012). Outline of Japanese Guideline for influence of the embedment length and the edges on tensile resistance of post-installed bonded anchors. In “Understanding Adhesive Anchors: SP-283-7”, American Concrete Institute, Farmington Hills MI, ÉtatsUnis, 1-5. Lisboa, Japan.
• Ožbolt J., Eligehausen R. (1990). Numerical analysis of headed studs embedded in large plain concrete blocks. Institut für Werkstoffe im Bauwesen, Universität Stuttgart, 645-656.
• Pahn M., Hanz F. (2012). Influence of the production process on the load-deflection behaviour of three-layered sandwich panels with GFRP-connections. Architecture Civil Engineering Environment. The Silesian University of Technology, No. 1, 37-46.
• Pająk Z., Starosolski W., Zybura A. (1986). The rating of connection the capacity three layers walls of with additional warming. Przegląd Budowlany, 3/1986, 408-411. (in Polish)
• Saleem M., Tsubaki T. (2010). Multi-layer model for pull-out behavior of post-installed anchor. In: Proceedings of FRAMCOS-7, Fracture Mechanics of Concrete Structures, AEDIFICATIO Publishers, Germany, Vol. II, Yokohama National University, Yokohama, Japan, 823-830.
• Starosolski W., Zybura A. (1992). The new anchor to connect the layers in prefabricated external walls. Przegląd Budowlany, 12/1992, 521-523. (in Polish)
• Wójtowicz M. (2011). Fault hazard of façade sandwich panels in the buildings constructed by means of large panel technology – real problem or media hit. Proceedings of XXV Scientific – Technical Conference 24 – 27 May Międzyzdroje, Building failures, 533-542. (in Polish)
• Yildirim V., Kantar K. M. (2014). A Comprehensive Evaluation of M-estimators for Linear Regression Model. International Journal of Mathematics and Statistics, Vol. 15, No. 1, 104-138.
• AT-15-6916-2009 (2011). Łączniki wklejane COPY-ECO do wzmacniania betonowych ścian warstwowych. Instytut Techniki Budowlanej, Warszawa.
• ETAG No. 001 Annex C. Methods for the design of anchorages.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).