Possibilities of using additives for wood pellet production

• Autorzy: Nosek R. , Jandacka J. , Holubcik M.
• Języki publikacji: EN

Abstrakty

EN

In this work are described the possibilities for improving efficiency of wood pellets production. The introductory part is devoted to analyzing the properties of wood pellets, combustion and production of pollutants when combusted it. The production of wood pellets and used pelleting machines was analyzed. The main task of this work is to introduce efficiency pelleting lines and cost reduction of the wood pellets production as fuel with a focus on the effects of adding additives. The results of experimental measurements and properties of wood pellets with different additives are presented in the final part.

Słowa kluczowe

PL

pelety drzewne

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Systems : journal of transdisciplinary systems science
• Rocznik: 2010
• Tom: Vol. 14, No sp.
• Strony: 96--101
• Opis fizyczny: Bibliogr. 6 poz., tab., rys.

Twórcy

autor

Nosek R.

• University of Zilina, Univerzitna 1, 010 26 Zilina, Slovakia

autor

Jandacka J.

• University of Zilina, Univerzitna 1, 010 26 Zilina, Slovakia

autor

Holubcik M.

• University of Zilina, Univerzitna 1, 010 26 Zilina, Slovakia

Bibliografia

• [1] DZURENDA L.: Combustion of wood and bark I.-2005, Editorship TU in Zvolen, Slovakia, ISBN 80-228-1555-1
• [2] HORBAJ P.: Environmental aspects of fuel combustion. Editorship Neografia. Martin, Slovakia 2000. s. 71, ISBN 80-7099-405-3
• [3] LINDAU I, RÖNNBÄCK M., SAMUELSSON J., THUNMAN, H. LECKNER, B.: An Estimation of the Spatial Resolution when Measuring Gas Concentrations Inside a Burning Fixed Bed, Presented at the Nordic Seminar - Thermo Chemical Conversion of Biofuels, Trondheim, Norway, (12 November) 2002.
• [4] JANDACKA J.; MALCHO M.: Biomass as energy source. Editorship Juraj Stefan GEORG, Zilina 2007, Slovakia; ISBN 978-80-969161-4-6
• [5] JANDACKA J., MALCHO M., FEDOROVA I.: Environmental aspects of the small capacity of heat sources for biofuel. Heating 8/2007, ISSN 1211-0906
• [6] SMITH B. and RANADE J.: Computational Fluid Dynamics for Designing Process Equipment: Expectations, Current Status, and Path Forward, Ind. Eng. Chem. Res., vol. 42, 1115-1128., 2003