Experimental modelling of wire-to-multicylinder Electrostatic Precipitator

• Autorzy: Berkane Krachai Charifa

Identyfikatory

DOI

10.15199/48.2020.10.34

Warianty tytułu

PL

Eksperymentalne modelowanie elektrostatycznego urządzenia do wytrącania kurzu

• Języki publikacji: EN

Abstrakty

EN

The efficiency of electrostatic filters depends mainly on the value of the applied voltage and the distribution of the electric field. However, increasing the values of the applied voltage is associated with the increase of the energy consumption resulting in obvious price increase. This paper presents other method of achieving highest efficiency of dust removal. A new geometry arrangement of electrostatic precipitator is investigated experimentally using incense particles in DC corona discharge. An efficiency of 100 % is reached at an applied voltage of 9 kV.

PL

Analizowano praće filtra elektrostatycznego, a głównie zależność jego skuteczności od przyłożonego napięcia i rozkładu pola elektrostatycznego. Poprawę skuteczności usuwania kurzu osiągnięto prze optymalizację geometrii.

Słowa kluczowe

EN

Electrostatic Precipitators; energy consumption; DC corona discharge; geometry arrangement

PL

separator elektrostatyczny; pole elektrostatyczne; wyładowanie DC

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2020
• Tom: R. 96, nr 10
• Strony: 179--183
• Opis fizyczny: Bibliogr. 20 poz., rys.

Twórcy

autor

Berkane Krachai Charifa

• Departement of Electrical Engineering, Laboratory of Electrical Engineering of Oran (L. E. G. O), University of Science and Tecgnology Mohamed boudiaf, El Mnaouar, BP1505, Bir El Djir 31000, Oran, Algeria

Bibliografia

• [1] Hory M., Computer – aided design of the safe deduster with bifilar winding for dedusting materials in agri–food industry, Przeglad Elektrotechniczny, 92 (2016), nr 3, 69-72
• [2] Podliński J., Berendt A., Niewulis A., Mizeraczyk J., Electrohydrodynamic secondary flow in the electrostatic precipitator with spiked electrodes, Przegląd Elektrotechniczny, 88 (2012), nr 8, 22-24
• [3] Sumorek A., The influence of shape and dimension of dust particle on electrostatic precipitator operation, Przeglad Elektrotechniczny, 94 (2018), nr 7, 54-57
• [4] Mizuno A., Electrostatic precipitation, IEEE Trans. Dielectr. Electr. Insul., 7 (2000), 615-624.
• [5] Chang J. S., Kelly A. J., and Crowley J. M., Handbook of Electrostatic Processes, Marcel Dekker Edition, New York,(1995) 441-480
• [6] Nowakowska H., Modelling of electrohydrodynamic (EHD) flow in a cylindrical precipitator with eccentric wire electrode, Przegląd Elektrotechniczny, 92 (2016), nr 8, 16-19
• [7] Parker K. R., Applied Electrostatic Precipitators, London, U.K., Chapman and Hall, (1997).
• [8] Dumitran L. M., Blejan O., Notingher P. V., Samuila A., and Dascalescu L. , Particle charging in combined coronaelectrostatic fields, IEEE Transactions on Industry Applications, 44 (2008), 1385–1390
• [9] Jędrusik M., Gajewski J. B., and Świerczok A. J., Effect of the particle diameter and corona electrode geometry on the particle migration velocity in Electrostatic Precipitators, Journal Electrostatics, (2001), nr 51-52, 245–251
• [10] Zouzou N., Mayer-Laigle C., Rouau A.X., Zouaghi, Kherbouche F., Dascalescu L., Study of two-stage-type electrostatic precipitator in axisymmetric configuration applied to finely ground lignocellulosic materials, IEEE Transactions on Industry Applications, 55 (2019), 3144-3121
• [11] Świerczok A., Jędrusik M., The collection efficiency of ESP model - Comparison of experimental results and calculations using Deutsch model, Journal of Electrostatics, 91 (2018), 41– 47
• [12] Popa G. N., Dinis C.M., Deaconu S.I., Numerical modeling in plate-type electrostatic precipitator supplied with pulse energization, Proceedings of the 2011- 14th European Conference on Power Electronics and Applications EPE, (2011), 1-8
• [13] Kherbouche F., Benmimoun Y., Tilmatine A., Zouaghi A., Zouzou N., Study of a new electrostatic precipitator with asymmetrical wire-to-cylinder configuration for cement particles collection, Journal of Electrostatics, 83 (2016), 7-15
• [14] Cooperman P., A theory for space charge limited currents with application to electrical precipitation, transactions of the american institute of electrical engineers, 79 (1960), 47–50
• [15] Dupuy J., Effet de couronne et champs ionises, General magazine of Electricity, 67(1958), nr 2, 85-104
• [16] Reischl G. P., Bipolar charging of ultrafine particles in the size range below 10 nm, Journal of Aerosol Science, 27(1996), nr 6, 931-949
• [17] Dramane B., Zouzou N., Moreau E., Touchard G., Electrostatic precipitation in wire-to-cylinder configuration: Effect of the highvoltage power supply waveform, Journal of Electrostatics, 67 (2009), 117-122
• [18] Liang X., Jayaram S., Member S., Berezin A. A., Modeling of the electrical parameters of a wire-cylinder electrostatic precipitator under pulse energization, IEEE Transactions on Industry Applications, 38 (2002), nr 1, 35-42
• [19] Zouzou N., Moreau E., Touchard G., Précipitation électrostatique dans une configuration pointe-plan, Journal of Electrostatics, 64 (2006), nr 7-9, 537-542
• [20] Zukeran A., Looy P.C., Chakrabarti A., Berezin A.A., Jayaram S., Cross J.D., Ito T., Chang J.S., Collection efficiency of ultrafine particles by an electrostatic precipitator under dc and pulse operating modes, IEEE Transactions on Industry Applications, 35 (1999), nr 5, 1184-1191

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).