Powiadomienia systemowe
- Sesja wygasła!
- Sesja wygasła!
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
The paper presents a concept of an active filter with energy storage. This solution can be used for the compensation of momentary one phase high power loads with discontinued power consumption (e.g. spot welding machines). Apart from the typical filtering capabilities, the system’s task is also the continuity of the input power from the feeder line and limiting its fluctuation. The proposed by the author’s solution can produce measurable economic benefits by reducing the rated power necessary to energize periodically operating loads and improving the indicators of electrical energy quality. The developed method of active power surges compensation enables a flexible approach to requirements concerning the rated power of the point to which the periodically operating loads with high peak current value are connected. The tests were conducted on a simulation model specially developed in Matlab & Simulink environment, proving high effectiveness of the presented solution.
Słowa kluczowe
Czasopismo
Rocznik
Tom
Strony
221--234
Opis fizyczny
Bibliogr. 31 poz., fig., tab.
Twórcy
autor
- AGH University of Science and Technology Department of Power Electronics and Energy Control Systems Mickiewicza 30, 30-059 Kraków, Poland
autor
- AGH University of Science and Technology Department of Power Electronics and Energy Control Systems Mickiewicza 30, 30-059 Kraków, Poland
autor
- AGH University of Science and Technology Department of Power Electronics and Energy Control Systems Mickiewicza 30, 30-059 Kraków, Poland
Bibliografia
- [1] Hanzelka Z., The quality of electric power supply, AGH University of Science and Technology Press, (2013), (in Polish).
- [2] Benysek G., Improvement in the quality of delivery of electrical energy using power electronics systems, Springer (2007).
- [3] Piróg S., Power electronics: systems with network and hard commutations, AGH University of Science and Technology Press (2006), (in Polish).
- [4] Maciążek M., Grabowski G., Pasko M., Active power filters – optimization of sizing and placement, Bulletin of the Polish Academy of Science Technical Science 61(4): 847-853 (2013).
- [5] Bień A., Measuring systems in the power industry, AGH University of Science and Technology Press (2013), (in Polish).
- [6] Kunjumuhammed L. P., Mishra M. K., Comparison of single phase shunt active power filter algorithms, Power India Conference IEEE (2006).
- [7] Huann-Keng Ch., Bor-Ren L., Kai-Tsang Y., Kuan-Wei W., Hybrid Active Power Filter for power quality compensation, Power Electronics and Drives Systems, PEDS 2005, International Conference on 2: 949-954 (2005).
- [8] Chi-Seng L., Wai-Hei Ch., Man-Chung W., Ying-Duo H., Adaptive DC-Link Voltage-Controlled Hybrid Active Power Filters for Reactive Power Compensation, Power Electronics, IEEE Transactions on 27: 1758-1772 (2012).
- [9] Alcala J., Cardenas V., Miranda H., Perez-Ramirez J., Charre S., A three-phase back-to-back converter for reactive power compensation, current harmonic filtering and active power compensation, Energy Conversion Congress and Exposition (ECCE), pp. 2371-2377 (2013).
- [10] Belyakov A.I., Sojref D.A., High power supercapacitor's solutions for reliable power supply, Power Engineering, Energy and Electrical Drives, POWERENG '09. International Conference on, pp. 348-352 (2009).
- [11] Xuancai Z., Xiao L., Guoqiao S., Dehong X., Design of the Dynamic Power Compensation for PEMFC Distributed Power System, Industrial Electronics, IEEE Transactions on 57(6): 1935-1944 (2010).
- [12] Kato K., Ishigma S., Nakajima Y., Arai H., Ueda T., Iwata T., Ito Y., Sugao, K., 10MW, 3.3MWh Energy Storage System consisting of 4000 Flywheels controlled by ICT network for short cycle power fluctuation compensation, Power Electronics Conference (IPEC-Hiroshima 2014 – ECCEASIA), 2014 International, pp. 403-408 (2014).
- [13] Miao-Wiao Ch., Kato S., Sumitani H., Shimada R., Cache power for stand-alone power systems: Flywheel-based AC power solution, Power Electronics Conference (IPEC), 2010 International, pp. 2508-2515 (2010).
- [14] Park C.H., Jang S.J., Lee B.K., Won C.Y., Lee H.M., Design and control algorithm research of active regenerative bidirectional DC/DC converter used in electric railway, Power Electronics 7th International Conference on, pp. 790-794 (2007).
- [15] Xiao-li Ch., Da-qiang L., Wei-dong Z., Braking energy recovery for electric traction based on super-capacitor and Bidirectional DC-DC converter, Power Electronics and Motion Control Conference (IPEMC) 2: 879-883 (2012).
- [16] Baszynski M., Power factor correction boost rectifiers for the household appliances, Electrical Review87(3): 237-242 (2011).
- [17] Pirog S., Baszynski M., Modelling a single phase multicell DC/AC inverter using FPGA, Electrical Review 84(2): 84-87 (2008).
- [18] Steiner M., Klohr M., Pagiela S., Energy storage system with ultracaps on board of railway vehicles, Power Electronics and Applications, European Conference on, pp. 1-10 (2007).
- [19] Kazimierczuk M.K., Pulse-width Modulated DC-DC Power Converters, John Wiley & Sons (2008).
- [20] Dawidziuk J. A dual inductor-fed boost converter with an auxiliary transformer and voltage doubler, Bulletin of the Polish Academy of Science Technical Science 61(4): 787-791 (2013).
- [21] Barlik R., Nowak M., Grzejszczak P., Power transfer analysis in a single phase dual active bridge Bulletin of the Polish Academy of Science Technical Science 61(4): 809-828 (2013).
- [22] Richelli A., Comensoli S., Kovacs-Vajna Z.M., A DC/DC Boosting Technique and Power Management for Ultralow-Voltage Energy Harvesting Applications, Industrial Electronics, IEEE Transactions on 59(6): 2701-2708 (2012).
- [23] Yen-Shin Lai, Bo-Yuan Chen, New Random PWM Technique for a Full-Bridge DC/DC Converter With Harmonics Intensity Reduction and Considering Efficiency, Power Electronics, IEEE Transactions on 28(11): 5013-5023 (2013).
- [24] Senderski A., Formulation of simulation models of power electronics systems, AGH University of Science and Technology Press (2013), (in Polish).
- [25] Wu B., High-Power Converters and AC Drives, Wiley-IEEE Press (2006).
- [26] Abu-Rub H., Iqbal A., Guzinski J., High Performance Control of AC Drives with Matlab/Simulink Models, John Wiley & Sons (2012).
- [27] Barlik R., Nowak M., Power electronics: elements, components, systems, Oficyna Wydawnicza Politechniki Warszawskiej (2014), (in Polish).
- [28] Best R.E., Phase-locked loops: design, simulation, and applications, NY: McGraw-Hill (2003).
- [29] Zhang X., Tong D., Ding H., Xu D., Research of digital control bidirectional DC/DC converter based on ultra-capacitor, Power Electronics and Motion Control Conference (IPEMC), 3: 1545-1549 (2012).
- [30] Lingling D., Study on supercapacitor equivalent circuit model for power electronics applications, Power Electronics and Intelligent Transportation System (PEITS), 2nd International Conference on, 2: 51-54 (2009).
- [31] Electrical Engineering Handbook, Collective work, 3, WNT (2011), (in Polish).
Uwagi
PL
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-8257f102-efbc-4a57-b059-1646dde3afa7