PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Effects of SiC Coating of Carbon Fiber on Mechanical Properties in Short Carbon Fiber Reinforced Al Matrix Composite

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
A356 Al composites reinforced by short carbon fiber were prepared through the 2-step process: fabrication of a composite precursor and ultrasonication of the precursor melt. The short carbon fibers were coated with 0.15~1.5 μm thick SiC layer by a car-bothermal reaction, and an amount of the carbon fiber reinforcement was determined to be 1.5 vol.% and 4.0 vol.%, respectively. The addition of the carbon fiber increased the hardness of A356 alloy. However, tensile strength did not increase in the as-cast composites regardless of the SiC coating and volume fraction of the carbon fiber, due to the debonding which reduced load transfer efficiency from matrix to fiber at the interface. After T6-treatment of the composites, a significant increase in strength occurred only in the composite reinforced by the SiC-coated short carbon fiber, which was considered to result from the formation of a precipitate improving the Al/SiC interfacial strength.
Twórcy
autor
  • Advanced Materialsand Process R&D Department, Korea Institute of Industrial Technology, Incheon 21999, Republic of Korea
autor
  • Advanced Materialsand Process R&D Department, Korea Institute of Industrial Technology, Incheon 21999, Republic of Korea
autor
  • Advanced Materialsand Process R&D Department, Korea Institute of Industrial Technology, Incheon 21999, Republic of Korea
Bibliografia
  • [1] X. Huang, Materials 2, 2369 (2009).
  • [2] J. W. Kaczmar, K. Pietrzak, W. Wlosinski, J. Mat. Proc. Tech. 106, 58 (2000).
  • [3] H. Naji, S. M. Zebarjad, S. A. Sajjadi, Mater. Sci. and eng. A 486, 413 (2008).
  • [4] C. P. Ju, K.i. Chen, J. H. Chern, J. of Mat. Sci. 29, 5127 (1994).
  • [5] S. Ciby, B. C. Pai, K. G. Satyanarayana, V. K. Vaidyan, P. K. Rohatgi, J. of Mat. Eng. and Perf. 2 (3), 353 (1993).
  • [6] W. G. Wang, B. L. Xiao, Z. Y. Ma, Comp. Sci. Tech. 72 (2), 152 (2012).
  • [7] A. Daoud, Mater. Sci. and Eng. A, 391, 114 (2005).
  • [8] C.-W. Lee, I.-H. Kim, W. Lee, S.-H. Ko, J.-M. Jang, T.-W. Lee, S.-H. Lim, J. P. Park, J. D. Kim, Surf. Interface Anal. 42, 1231 (2010).
  • [9] S.-H. Li, C.-G. Chao, Metall. Mater. Trans. A 35 (7), 2153 (2004).
  • [10] E. Hajjari, M. Divandari, A. Mirhabibi, Mater. Des. 31 (5), 2381 (2010).
  • [11] L. Aggour, E. Fitzer, M. Heym, E. Ignatowitz, Thin Solid Films 40, 97 (1977).
  • [12] S. Bao, K. Tang, A. Kvithyld, T. Engh, M. Tangstard, Trans. Non-ferrous Met. Soc. China 22, 1930 (2012).
  • [13] T. Iseki, T. Kameda, T. Maruyama, J. Mater. Sci. 19 (5), 1692 (1984).
  • [14] A. C. Ferro, B. Debby, Acta Metal. Mater. 43 (8), 3061 (1995) .
  • [15] I.-H. Kim, W. Lee, C.-W. Lee, S.-H. Ko, J.-M. Jang, Surf. interface Anal. 42 (6‐7), 743 (2010).
  • [16] Y. Liu, B Kindl, Scr. Metall. Mater. 27 (10), 1367 (1992).
  • [17] H. Abderrazak, E. S. B. H. Hmida, R. Gerhardt (Ed.), Silicon carbide, InTech, Rijeka 316, Croatia (2011).
  • [18] D. L. Chung, Butterworth-Heinemann, Carbon Fiber Composites, Boston 1994.
  • [19] J. G. Morley, Academic Press, High-Performance Fiber Composites, Orlando 1987.
  • [20] W. Q. Song, P. Krauklis, A. P. Mouritz, S. Bandyopadhyay, Wear 185, 125 (1995).
  • [21] H. Ribes, R. D. Silva, M. Suéry, T. Bretheau, Mater. Sci. and Tech. 6, 621 (1990).
  • [22] P. Liu, A.-Q. Wang, J.-P. Xie, S.-M. Hao, Trans. Nonferrous Met. Soc. China 25, 1410 (2015).
Uwagi
1. This study has been conducted with the support of the Korea Institute of Industrial Technology as “Development of root technology for multi-product flexible production (kitech EO-20-0015)”
2. Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-82408ede-947a-4740-8414-030555f6aead
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.