Porosity Quantification of Additive Manufactured Ti6Al4V and CoCrW Alloys Produced by L-PBF

• Autorzy: Bidulský Robert , Petroušek Patrik , Bidulská Jana , Hudák Radovan , Živčák Jozef , Actis Grande Marco

Identyfikatory

DOI

10.24425/amm.2022.137475

• Języki publikacji: EN

Abstrakty

EN

The main aim of the present paper is to evaluate the porosity and mechanical properties of Ti6Al4V and CoCrW alloys produced by Laser Powder Bed Fusion (L-PBF) as an additive manufacturing (AM) technology. Ti6Al4V and CoCrW alloys are attractive for medical application. The complex examination of porosity for these alloys needs the quantification of morphological and dimensional characteristics. Quantification of porosity was realized on non-etched samples. Quantitative image analysis was used to describe the dimensional and morphological porosity characteristics. The pores were evaluated by Image pro plus software. The results show the significant inhomogeneity of the morphology and distribution, as well as the pore size in the investigated materials and underline the importance of pore structure for the controlling mechanism of the mechanical response.

Słowa kluczowe

EN

powder metallurgy; additive manufacturing; porosity; Ti6Al4V; CoCrW

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2022
• Tom: Vol. 67, iss. 1
• Strony: 83--89
• Opis fizyczny: Bibliogr. 37 poz., rys., tab.

Twórcy

autor

Bidulský Robert

• Politecnico di Torino, Department of Applied Science and Technology, Corso Duca degli Abruzzi, 24, 10129 Torino, Italy
• Asian Innovation Hub, Budulov 174, 045 01 Moldava Nad Bodvou, Slovakia

• https://orcid.org/0000-0002-8716-7844

autor

Petroušek Patrik

• Technical University of Kosice, Faculty of Materials, Metallurgy and Recycling, Dpt. of Plastic Deformation and Process Simulation, Letná 9, 042 00 Kosice, Slovakia

• https://orcid.org/0000-0002-8000-011X

autor

Bidulská Jana

• Technical University of Kosice, Faculty of Materials, Metallurgy and Recycling, Dpt. of Plastic Deformation and Process Simulation, Letná 9, 042 00 Kosice, Slovakia

• https://orcid.org/0000-0002-3462-3148

autor

Hudák Radovan

• Technical University of Kosice, Faculty of Mechanical Engineering, Dpt. of Instrumental and Biomedical Engineering, Letná 9, 042 00 Kosice, Slovakia

• https://orcid.org/0000-0003-1060-0539

autor

Živčák Jozef

• Technical University of Kosice, Faculty of Mechanical Engineering, Dpt. of Instrumental and Biomedical Engineering, Letná 9, 042 00 Kosice, Slovakia

• https://orcid.org/0000-0003-4316-5107

autor

Actis Grande Marco

• Politecnico di Torino, Department of Applied Science and Technology, Corso Duca degli Abruzzi, 24, 10129 Torino, Italy

• https://orcid.org/0000-0002-9258-6939

Bibliografia

• [1] F. Calignano, D. Manfredi, E.P. Ambrosio, S. Biamino, M. Lombardi, E. Atzeni, A. Salmi, P. Minetola, L. Iuliano, P. Fino, Proceedings of the IEEE 105, 593-612 (2017). DOI: https://doi.org/10.1109/JPROC.2016.2625098
• [2] G. Marchese, X.G. Colera, F. Calignano, M. Lorusso, S. Biamino, P. Minetola, D. Manfredi, Adv. Eng. Mater. 19, 1600635 (2017). DOI: https://doi.org/10.1002/adem.201600635
• [3] D. Manfredi, F. Calignano, M. Krishnan, R. Canali, E.P. Ambrosio, E. Atzeni, Materials 6 (3), 856-869 (2013). DOI: https://doi.org/10.3390/ma6030856
• [4] L. Yuan, S. Ding, C. Wen, Bioact. Mater. 4, 56-70 (2018). DOI: https://doi.org/10.1016/j.bioactmat.2018.12.003
• [5] C. Zitelli, P. Folgarait, A. Di Schino, Metals 9 (7), 731 (2019), DOI: https://doi.org/10.3390/met9070731
• [6] M. Zavala-Arredondo, T. London, M. Allen, T. Maccio, S. Ward, D. Griffiths, A. Allison, P. Goodwin, C. Hauser, Mater. Des. 182, 108018 (2019). DOI: https://doi.org/10.1016/j.matdes.2019.108018
• [7] D. Manfredi, R. Bidulsky, Acta Metall. Slovaca 23 (3), 276-282 (2017). DOI: https://doi.org/10.12776/ams.v23i3.988
• [8] K.A. Nazari, T. Hilditch, M.S. Dargusch, A. Nouri, J. Mech. Behav. Biomed. Mater. 63, 157 (2016). DOI: https://doi.org/10.1016/j.jmbbm.2016.06.016
• [9] L.D. Bobbio, S. Qin, A. Dunbar, P. Michaleris, A.M. Beese, Addit. Manuf. 14, 60-68 (2017). DOI: https://doi.org/10.1016/j.addma.2017.01.002
• [10] J.A. Slotwinski, E.J. Garboczi, K.M. Hebenstreit, J. Res. Natl. Inst. Stand. Technol. 119, 494-528 (2014). DOI: https://doi.org/10.6028/jres.119.019
• [11] J. Bidulska, R. Bidulsky, M.A. Grande, T. Kvackaj, Materials 12 (22), 3724 (2019). DOI: https://doi.org/10.3390/ma12223724
• [12] R. Bidulsky, J. Bidulska, F.S. Gobber, T. Kvackaj, P. Petrousek, M. Actis-Grande, K.-P. Weiss, D. Manfredi, Materials 13 (15), 3328 (2020). DOI: https://doi.org/10.3390/ma13153328
• [13] J. Bidulská, T. Kvačkaj, I. Pokorný, R. Bidulský, M. Actis Grande, Arch. Metall. Mater. 58 (2), 371-375 (2013). DOI: https://doi.org/10.2478/amm-2013-0002
• [14] Wohlers Associates. 2012. Additive Manufacturing: Status and Opportunities, Wohlers Associates, Inc.
• [15] R. Bidulsky, J. Bidulská, P. Petroušek, A. Fedoriková, E. Dudrová, M. Actis Grande: Acta Phys. Pol. A 131 (5), 1367-1370 (2017). DOI: https://doi.org/10.12693/APhysPolA.131.1367
• [16] J. Bidulská, T. Kvačkaj, R. Bidulský, M. Actis Grande, Acta Phys. Pol. A 122, 553-556 (2012).
• [17] E. Poskovic, F. Franchini, M. Actis Grande, L. Ferraris, R. Bidulsky, Acta Metall. Slovaca 23 (4), 356-362 (2017). DOI: https://doi.org/10.12776/ams.v23i4.1032
• [18] M. Besterci, K. Sulleiova, Acta Metall. Slovaca 25 (1), 65-72 (2019). DOI: https://doi.org/10.12776/ams.v25i1.1233
• [19] A. Aversa, M. Lorusso, G. Cattano, D. Manfredi, F. Calignano, E.P. Ambrosio, S. Biamino, P. Fino, M. Lombardi, M. Pavese, J. Alloy. Compd. 695, 1470-1478 (2017). DOI: https://doi.org/10.1016/j.jallcom.2016.10.285
• [20] V. Rajťúková, A. Balogová, T. Tóth, R. Hudák, J. Živčák, G. Ižaríková, A. Somoš, M. Kovačevič, Lekar a technika 48 (1), 22-28 (2018).
• [21] J. Bidulská, T. Kvačkaj, R. Bidulský, M. Actis Grande, L. Lityńska-Dobrzyńska, J. Dutkiewicz, Chem. Listy 105 (16), s471-s473 (2011).
• [22] J. Bidulská, R. Bidulský, M. Actis Grande, T. Kvačkaj, Materials 12, 3724 (2019). DOI: https://doi.org/10.3390/ma12223724
• [23] J. Bidulská, R. Bidulský, P. Petroušek, A. Fedoriková, I. Katreničová, I. Pokorný, Acta Phys. Pol. A 131 (5), 1384-1386 (2017). DOI: https://doi.org/10.12693/APhysPolA.131.1384
• [24] P. Heinl, L. Müller, C. Körner, R.F. Singer, F.A. Müller, Acta Biomat. 4 (5), 1536-1544 (2008). DOI: https://doi.org/10.1016/j.actbio.2008.03.013
• [25] J. Alcisto, A. Enriquez, H. Garcia, S. Hinkson, T. Steelman, E. Silverman, P. Valdovino, H. Gigerenzer, J. Foyos, J. Ogren, J. Dorey, K. Karg, T. McDonald, O.S. Es-Said, J. Mater. Eng. Perform. 20, 203-212 (2011).
• [26] B. Vrancken, L. Thijs, J.-P. Kruth, J. Van Humbeeck, J. Alloys Compd. 541, 177-185 (2012).
• [27] S. Liu, Y.C. Shin, Mater. Des. 164, 107552 (2019). DOI: https://doi.org/10.1016/j.matdes.2018.107552
• [28] B. Ren, C. Chen, M. Zhang, Opt. Eng. 57 (4), 041409 (2018). DOI: https://doi.org/10.1117/1.OE.57.4.041409
• [29] Y. Lu, Y. Gan, J. Lin, S. Guo, S. Wu, J. Lin, Rapid Prototyp. J. 23 (1), 28-33 (2017). DOI: https://doi.org/10.1108/RPJ-07-2015-0085
• [30] Y. Lu et al., J. Mech. Behav. Biomed. Mater. 81, 130-141 (2018). DOI: https://doi.org/10.1016/j.jmbbm.2018.02.026
• [31] B. Zhang, Y. Li, Q. Bai, Chin. J. Mech. Eng. 30, 515-527 (2017). DOI: https://doi.org/10.1007/s10033-017-0121-5
• [32] T. Vilaro, C. Colin, J.D. Bartout, Metall. Mater. Trans. A 42, 3190-3199 (2011).
• [33] G. Marinelli, F. Martin, S. Ganguly, S. Williams, Int. J. Refract. Met. Hard Mater. 82, 329-335 (2019).
• [34] B. Nie, L. Yang, H. Huang, S. Bai, P. Wan, J. Liu, Appl. Phys. A 119, 1075-1080 (2015). DOI: https://doi.org/10.1007/s00339-015-9070-y
• [35] X. Zhou, X. Liu, D. Zhang, Z. Shen, W. Liu, J. Mater. Process. Technol. 222, 33-42 (2015). DOI: https://doi.org/10.1016/j.jmatprotec.2015.02.032
• [36] I. Yadroitsev, P. Krakhmalev, I. Yadroitsava, Addit. Manuf. 7, 45-56 (2015). DOI: https://doi.org/10.1016/J.ADDMA.2014.12.007
• [37] G. Kasperovich, J. Haubrich, J. Gussone, G. Requena, Mater. Des. 105, 160-170 (2016).

Uwagi

1. Authors are grateful for the support of experimental works by project VEGA 1/0732/16.

2. Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).