Experimental Analysis of a Gantry Crane of a Shell Structure

• Autorzy: Ładecki B. , Badura S. , Matachowski F.
• Języki publikacji: EN

Abstrakty

EN

Gantry cranes of the shell structure are used in Polish steel industry much less than other gantry crane types. Those gantry cranes characterized by increased susceptibility to mechanical vibrations, resulting in greater sensitivity to the formation of fatigue cracks. In this work, measurements of strain gauge bridge deformation of the shells, for which periodically conducted non-destructive testing revealed the presence of numerous fatigue cracks mainly in the area of the under rail beams. Performed periodically repair and reinforcement of the crane did not eliminate the problem of the formation of the subsequent fatigue cracks. The analysis of the dynamic operation of the bridge, in combination with FEM calculations carried out showed stresses exceeding the limit value due to the fatigue phenomena. The results of dynamic analysis can serve as a basis to perform more accurate analysis of the fatigue life of the most intensive areas of the bridge.

Słowa kluczowe

EN

strain gauge measurements; stress state; gantry cranes; FEM; non-destructive testing; NDT

PL

naprężenia; metoda elementów skończonych; badania nieniszczące

• Wydawca: Instytut Podstawowych Problemów Techniki PAN
• Czasopismo: Engineering Transactions
• Rocznik: 2014
• Tom: Vol. 62, iss. 2
• Strony: 171--186
• Opis fizyczny: Bibliogr. 10 poz., rys., tab., wykr.

Twórcy

autor

Ładecki B.

• AGH University of Science and Technology Faculty of Mechanical Engineering and Robotics Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Badura S.

• AGH University of Science and Technology Faculty of Mechanical Engineering and Robotics Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Matachowski F.

• AGH University of Science and Technology Faculty of Mechanical Engineering and Robotics Al. Mickiewicza 30, 30-059 Kraków, Poland

Bibliografia

• 1. Ładecki B. et al., Ganty crane expertise in Zakład Wielkie Piece [in Polish: Ekspertyzy mostu przeładunkowego w Zakładzie Wielkie Piece], PREH Sp. z o.o., Kraków 2003, 2010 and 2013.
• 2. Ładecki B., Borowiec W., Geodetic monitoring as a nondestructive method in assessment of the technical state of constructions [in Polish: Monitoring geodezyjny jako nieniszcząca metoda oceny stanu technicznego konstrukcji], Materiały 39 Krajowej Konferencji Badań Nieniszczących, Szczyrk 2010.
• 3. Ładecki B., Badura S., Matachowski F., Strength analysis of a gantry crane of coating structure, Mechanics and Control, 31, 3, 102–107, 2012.
• 4. PN-90/B-03200 Steel structures. Design rules [in Polish: Konstrukcje stalowe. Obliczenia i projektowanie].
• 5. Ładecki B., Badura S., Dynamic analysis of charging bridge of a shell structure, Journal of Civil Engineering, Environment and Architecture, Oficyna Wydawnicza Politechniki Rzeszowskiej, Rzeszów 2014.
• 6. Zienkiewicz O.C., Taylor R.L., Finite Element Method (5th Edition), Elsevier, 2000.
• 7. Hoffmann K., An Introduction to Measurements using Strain Gages, Hottinger Baldwin Messtechnik GmbH, 1987.
• 8. Flugge W., Stresses in Shells, Springer-Verlag, 1973.
• 9. Cartz L., Nondestructive Testing, ASM International, ISBN 978-0-87170-517-4, 1995.
• 10. Henry F.D.C., The design and construction of engineering foundations, Chapman and Hall Ltd 1986.