New Technological Concept for Thermal Spray Protective Coatings

• Autorzy: Szczucka-Lasota B. , Piwnik J.

Identyfikatory

DOI

10.1515/amm-2017-0232

• Języki publikacji: EN

Abstrakty

EN

Thermally spraying with micro-jet cooling is an innovate technology. It is possible to get fine dispersive structure of coatings during the shorter time in comparable to the classical high velocity oxygen fuel process (HVOF). It corresponds with good corrosion-erosion properties of structure. In the paper the parameters of the spraying with micro-jet cooling process are presented. The selected properties of coatings obtained by hybrid method are presented. The results of wear tests for hybrid and HVOF coating are compared. Results of investigation are very optimistic. The presented technology should be adapted to the actual production of protective coating for machines and construction working in wear conditions.

Słowa kluczowe

EN

cooling system; micro-injector; technological concept

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 3
• Strony: 1499--1504
• Opis fizyczny: Bibliogr. 18 poz., rys., tab.

Twórcy

autor

Szczucka-Lasota B.

• Higher School of Labor Safety Management in Katowice. 8 Bankowa Str., 40-007 Katowice, Poland

autor

Piwnik J.

• Bialystok University of Technology, 45c Wiejska Str., 15-351 Białystok, Poland

Bibliografia

• [1] B. Wielage, H. Pokhmurska, M. Student, V. Gvozdeckij, T. Stupnyckyj, V. Pokhmurskij, Surf. Coat. Tech. 220 (2013).
• [2] L. Chang-Ji Iu, Y. Guan-Jun, Int. J. Refract. Met. Hard. Mater. 39 (2013).
• [3] K. Szymański, A. Hernas, G. Moskal, H. Myalska, Surf. Coat. Tech. 268, 25 (2015.)
• [4] G. Golański, A. Zieliński, J. Słania, J. Jasak, Arch. Metall. Mater. 59, 2 (2014).
• [5] G. Golański, P. Gawień, P. Słania, Examination of Coil Pipe Butt Joint Made of 7CrMoVTib10 – 10(T24) Steel After Service, Arch. Metall. Mater. 57, 2 (2012).
• [6] A. Hernas, The processes of destruction and protective coatings used in power industry, Racibórz, Polska (2015).
• [7] Z. Zurecki, R. Ghosh, T. Mebrahtu, M. J. Thayer, S. R. Stringer, Automated substrate cooling system for HVOF coating operations, in: E. Lugscheider (Ed.) Air Products & Chemicals, Maastricht, Netherlands (2008).
• [8] A. Lisiecki, Metals 5, 1 (2015).
• [9] T. Węgrzyn, J. Piwnik, B. Łazarz, D. Hadryś, Arch. Metall. Mater. 58, 2 (2013).
• [10] T. Węgrzyn, J. Piwnik, J. Wieszała, D. Hadryś, Arch. Metall. Mater. 57, 3 (2012).
• [11] R. Burdzik, P. Folęga, B. Łazarz, Z. Stanik, J. Warczek, Arch. Metall. Mater. 57, 4 (2012).
• [12] W. Tarasiuk, B. Szczucka-Lasota, J. Piwnik, W. Majewski, Advanced Materials Research 1036, (2014).
• [13] R. Burdzik, Ł. Konieczny, Journal of Vibroengineering 15, 4 (2013).
• [14] T. Wegrzyn, J. Piwnik, D. Hadryś, Arch. Metall. Mater. 58, 4 (2013).
• [15] T. Wegrzyn, J. Piwnik, D. Hadryś, Arch. Metall. Mater. 59, 2 (2014).
• [16] A. Kurc-Lisiecka, W. Ozgowicz, W. Ratuszek, J. Kowalska, Solid State Phenomena, 203-204, (2013), Doi 10.4028/www.scientific.net/SSP.203-204.105
• [17] J. Piwnik, D. Hadryś, G. Skorulski, Arch. Metall. Mater 59, 1 (2013).
• [18] A. Lisiecki, Arch. Metall. Mater. 59 (4), (2014).

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).