Experimental investigation on the performance analysis of a constructed hydro-powered coil pump

• Autorzy: Hossain Alamgir , Rahman Minhaj , Fahad Shariful Islam

Identyfikatory

DOI

10.24423/EngTrans.3211.2024

• Języki publikacji: EN

Abstrakty

EN

A hydro-powered water pumping system is one of the most important systems for upland areas in terms of supplying water for irrigation and daily usage. This paper presents the development and performance analysis of a hydro-powered coil pump, a clean energy pump that discharges and lifts water to a certain height without using any external energy sources. In this work, a coil pump with a radius of 0.152 m, 12 blades, four inlets, and two different outlets with 100 and 3/800 delivery pipes have been used for analyzing the performance of the pump separately. An open channel has been constructed with a length of 1.152 m, a width of 0.3028 m, and a depth of 0.254 m, incorporating a rectangular and v-notch. From the analysis, it has been seen that the coil pump with a v-notch and a 100 delivery pipe shows better results in terms of discharge, power acquired, and water velocity through the open channel than the coil pump with a 3/800 delivery pipe. However, for pumping water at the maximum manometric height, a 3/800 delivery pipe with a rectangular notch performs better than the v-notch.

Słowa kluczowe

EN

renewable energy; coil pump; open channel; irrigation

• Wydawca: Instytut Podstawowych Problemów Techniki PAN
• Czasopismo: Engineering Transactions
• Rocznik: 2024
• Tom: Vol. 72, iss. 2
• Strony: 145--158
• Opis fizyczny: Bibliogr. 15 poz., rys., tab., wykr.

Twórcy

autor

Hossain Alamgir

• Department of Mechanical Engineering Bangladesh Army University of Science and Technology (BAUST) Saidpur Cantonment, Bangladesh

autor

Rahman Minhaj

• Department of Mechanical Engineering Bangladesh Army University of Science and Technology (BAUST) Saidpur Cantonment, Bangladesh

autor

Fahad Shariful Islam

• Department of Mechanical Engineering Bangladesh Army University of Science and Technology (BAUST) Saidpur Cantonment, Bangladesh

Bibliografia

• 1. International Renewable Energy Agency (IRENA), Renewable Energy Technologies, https://www.irena.org/Data/View-data-by-topic/Capacity-and-Generation/Technologies (retrieved 2023.10.14).
• 2. Hydropower Special Market Report-Analysis and Forecast to 2030, Paris, France: IEA, https://www.iea.org/reports/hydropower-special-market-report.
• 3. Gopal C., Mohanraj M., Chandramohan P., Chandrasekar P., Renewable Energy source water pumping systems – A literature review, Renewable and Sustainable Energy Reviews, 25: 351–370, 2013, doi: 10.1016/j.rser.2013.04.012.
• 4. Intriago Zambrano J.C., Michavila J., Arenas Pinilla E., Diehl J.C., Ertsen M.W., Water lifting water: a comprehensive spatiotemporal review on the hydropowered water pumping technologies, Water, 11(8): 1677, 2019, doi: 10.3390/w11081677.
• 5. Garc´ıa Morillo J., McNabola A., Camacho E., Montesinos P., Rodr´ıguez D´ıaz J.A., Hydro-power energy recovery in pressurized irrigation networks: A case study of an Irrigation District in the South of Spain, Agricultural Water Management, 204: 17–27, 2018, doi: 10.1016/j.agwat.2018.03.035.
• 6. Naegel L.C.A., The Hydrostatic Spiral Pump: Design, Construction and Field Tests of Locally-Developed Spiral Pumps, Jaspers Verslag, Munich, Germany, 1998.
• 7. Modi V.J., Nourbaksh A., Design and parametric performance of a rotating helical coil pump, [in:] Proceedings of the JFPS International Symposium on Fluid Power, 1993(2): 249–254, 1993, doi: 10.5739/isfp.1993.249.
• 8. Kassab S.Z., Abdel Naby A.A., El Sayed I.A.B., Coil pump performance under variable operating conditions, [in:] Proceedings of the Ninth International Water Technology Conference, IWTC9, pp. 655–672, 2005.
• 9. Kassab S.Z., Abdel Naby A.A., Abdel Basier E.S.I., Performance of multi-layers coil pump, [in:] Proceedings of the Tenth International Water Technology Conference, IWTC10, pp. 431–445, 2006.
• 10. Quiroga J., Tschiersch K., Bohórquez O., Coil pump design as an object of meaningful learning, Journal of Physics: Conference Series, 1161(1): 012027, 2019, doi: 10.1088/1742-6596/1161/1/012027.
• 11. Patil N.R., Gaikwad S.R., Navale R.A., Sonawane D.S., Design, manufacturing and performance analysis of spiral coil pump, Applied Mechanics and Materials, 446–447: 549–552, 2013, doi: 10.4028/www.scientific.net/amm.446-447.549.
• 12. Thompson P.L., Milonova S., Reha M., Mased F., Tromble I., Coil pump design for a Community Fountain in Zambia, International Journal for Service Learning in Engineering, Humanitarian Engineering and Social Entrepreneurship, 6(1): 33–45, 2011, doi:10.24908/ijsle.v6i1.3217.
• 13. Poudel S., Adhikari R., Adhikari S., Regmi M., Dura H.B., Design and analysis of a hydro-powered water turbine pump: a sustainable irrigation infrastructure, AQUA – Water Infrastructure, Ecosystems and Society, 70(8): 1231–1247, 2021, doi: 10.2166/aqua.2021.082.
• 14. Stuckey A.T., Wilson E.M., The stream-powered manometric pump, [in:] Appropriate Technology In Civil Engineering: Proceedings of the Conference Held by the Institution of Civil Engineers, 34: 135–138, 1981, doi: 10.1680/atice.01008.0045.
• 15. Tailer P., The Spiral Pump. A High Lift, Slow Turning Pump, 2005, http://lurkertech.com/water/pump/tailer/ (retrieved 2023.10.12).