Prioritisation and Analysis of Faults in Shirt Production by the A3 Technique

• Autorzy: Küçük Mehmet

Identyfikatory

DOI

10.2478/ftee-2022-0005

• Języki publikacji: EN

Abstrakty

EN

In this study, it was aimed to solve the problems occurring in a clothing company’s shirt manufacturing line. For this Pareto charts and A3 reporting philosophy were used to organise the process in the best way. In line with the examinations and analyses made, an apparatus was developed to shorten the unit time and standardise the quality for the collar preparation process, which is the fault with the highest frequency. Afterward, the collar preparation process was compared according to the situation with the apparatus, manual and automat. As a result of the implementation of the Pareto charts and A3 reporting technique, it can be seen that while the total time spent on the process with the automat is 24.6 seconds, this time is 87% quicker than the apparatus developed, which is 46.2 seconds; however, it needs 95% more investment.

Słowa kluczowe

EN

collar; preparation technique; shirt production; Pareto chart; A3 technique; productivity; standard time

• Wydawca: Sieć Badawcza Łukasiewicz - Łódzki Instytut Technologiczny
• Czasopismo: Fibres & Textiles in Eastern Europe
• Rocznik: 2022
• Tom: Vol. 30, no. 2
• Strony: 35--46
• Opis fizyczny: Bibliogr. 9 poz., rys., tab.

Twórcy

autor

Küçük Mehmet

• Textile Engineering Department, Engineering Faculty, Ege University, 35100 Bornova, İzmir, Turkey

• https://orcid.org/0000-0002-0017-5762

Bibliografia

• 1. Şeker A. Problem Solving Ability of Lean Production Techniques: A3 Report, OBEYA and SMED. Journal of Social and Humanities Sciences Research 2019; 6(32), 100-111.
• 2. Morgan J M, Liker J K. The Toyota Product Development System. Productivity Press, New York, 2006; 363pp.
• 3. Akay A, Tiryaki D, Çelebi N. Retrieved from https://docplayer.biz.tr/7007743-A3-yonetimi-ileyaglama-ve-paketlemesurecinin-reorganizasyonu-metal-sanayisektorunde-bir-uygulama.html (Accessed March 10, 2019).
• 4. Kara N. Problems Faced on the Aircraft Assembly Area and Improvements. Engineer and Machinery 2018; 59(690) 69-77.
• 5. Saçıkara G. Uluslararası İşletmelerde ERP Kurulumunun İncelenmesi ve Kurulumda Karşılaşılan Problemlere Çözüm Önerileri. Yıldız Technical University Institute of Science and Technology, Post Graduate Thesis. Istanbul, 2006.
• 6. Çakırkaya M, Acar Ö E. The Determination of the Significance Level of the Mistakes, Occurred in a Production Line, by Means of Pareto Analysis that is One of the Statistical Process Control Techniques. Mustafa Kemal University Journal of Social Sciences Institute 2016; 13(36) 272-288.
• 7. Ala D M, İkiz Y.) A Statistical Investigation for Determining Fabric Defects that Occur during Weaving Production. Pamukkale University Journal of Engineering Sciences 2015; 21(7) 282-287.
• 8. Sobek DK, Smalley A. Understanding A3 Thinking: A Critical Component of Toyota’s PDCA Management System, Productivity Press,. Boca Raton, FL, 2008.
• 9. Epa Akin Shirt Machines. Retrieved from: https://www.epaakin.com/shirt-machines/epa-400-04/collar-trimming-and-turningmachine (Acessed April 03, 2022).