On a environmentally friendly supply of energy

• Autorzy: Horbaj P. , Braunmiller G. , Taus P.
• Języki publikacji: EN

Abstrakty

EN

In the paper a concept of enviromental compatible energy supply is discussed. A many aspects, theoretical comparison of organic Rankine cycle (ORC) and the Kalina process has been presented. The first cycle (ORC) deals low boiling point working fluid in power plants. The second cycle uses different mixtures of the circulated medium.

Słowa kluczowe

EN

geothermal energy; ORC; Kalina power plant

• Wydawca: Wydawnictwo Instytutu Maszyn Przepływowych PAN
• Czasopismo: Transactions of the Institute of Fluid-Flow Machinery
• Rocznik: 2014
• Tom: nr 126
• Strony: 221--230
• Opis fizyczny: Bibliogr. 18 poz., rys.

Twórcy

autor

Horbaj P.

• Košice University of Technology, Faculty of Mining, Ecology, Control and Geotechnology Park Komenského 19, 043 84 Košice, Slovakia.

autor

Braunmiller G.

• MBA, Ebert-Cosulting Group GmbH and Co.KG, Marienbergstr. 9490411 Nuremberg, Germany.

autor

Taus P.

• Košice University of Technology, Faculty of Mechanical Engineering, Department of energy technologies, Vysokoškolská 4, 042 00 Košice, Slovakia.

Bibliografia

• [1] Jesionek K., Chrzczonowski A.: Cheng cycle as proecological electrical and heat energy source. In: 4th Int. Sci. Conf. Energy Saving Problems, Lviv Polytechnic National University of Lviv, Proc. 2003, 271–275.
• [2] Kalina A. A.: Kalina cycle technology and its applications. American Institute of Chemical Engineers, New York 1986, Accessed 30/08/2013.
• [3] Badur J., Karcz M., Lemański M., Zakrzewski W., Jesionek K.: Remarks on steam condensation modelling related to steam turbine of large output. In: Proc. of microCAD, Int. Sci. Conf., Miskolc 2011.
• [4] Ziółkowski P.: Numerical Analysis of Exploitation Conditions of Gorzów CHP Heat Cycle Before and After Modernization. MSc thesis, Gdańsk University of Technology, Gdańsk 2011 (in Polish).
• [5] Jesionek K., Chrzczonowski A., Ziółkowski P., Badur J.: Power enhancement of the Brayton cycle by steam utilization. Arch. Thermodyn. 33(2012), 3, 39– 50.
• [6] Jesionek K., Chrzczonowski A., Badur J., Lemański M.: On the parametric analysis of performance of advanced Cheng cycle. Sciencist Letters Applied Mechanics Department, 23, 12-23, Silesian UT, Gliwice 2004.
• [7] Borsukiewicz-Gozdur A.: Efficiency of Geothermal Power Plant with Organic Working Fluid. PhD thesis, West Pomeranian UT, Szczecin 2008.
• [8] Martinka J., Kačíková D., Hroncová E., Ladomerský J.: Experimental determination of the effect of temperature and oxygen concentration on the production of birch wood main fire emmisions. J. Therm. Anal. Calorime. 110(2012), 1, 485–487.
• [9] Hetttiarachchi M.H.D., Golubovič M., Wore W.M., Ikegami Y.: Optimum design criteria for an Organic Rankine cycle using low-temperature geothermal heat sources. Energy 32(2007), 9, 1698–1706.
• [10] Badur J., Lemański M.: Inverse Brayton cycle – high performance manner heat recovery from gas turbine. Energetyka Cieplna i Zawodowa 221, 2003, 46–48 (in Polish).
• [11] Vranayová Z., Vranay F., Očipov’a D.: Renewable energy for smart buildings in conditions of the Slovak republic. J. Int. Sci. Publ. 3(2009), 1, 486–493.
• [12] Laciak M., Kačur J., Durdán M.: Material and energy balance of the UCG process in the laboratory conditions. (CD-ROM). In: Proc. SGEM 2011 – 11th Int. Multidisciplinary Sci. GeoConf. Sofia, Vol. 3, 2011, 69–76, .
• [13] Košičanová D., Kapalo P.: A consumer model for researching the integrative effectiveness of renewable energy sources – a design concept of technical equipment. Techn. Trans. 109(2012), 3, 247–253.
• [14] Tkáč M., Hvizdoš S.: Distributed generation and renewable energy sources for sustainable life. In: Distributed Power Generation Systems. Plzeň 2005, 47–52.
• [15] Lázár M., Lengyelová M., Imriš I.: Vitrification of fly ash from the incineration of municipal waste in a plasma reactor. Chem. lett. 108(2014), 2, 148–155 (in Slovak).
• [16] Puškár, M., Bigoš, P., Puškárová, P.: Accurate measurements of output characteristics and detonations of motorbike high-speed racing engine and their optimization at actual atmospheric conditions and combusted mixture composition. Measurement 45(2012), 5, 1067–1076.
• [17] Lázár M., Brestovič T., Schvarzbacherová E.: Designing low gas flow meters based on the calometric principle of flow rate measuring. Holistic Approach to Environment 1(2011), 4, 153–162.
• [18] Marasová D. et al.: Analysis model for determination of contact loads between tube-shaped conveyor belt of a pipe conveyor and carrier rolls. Cuprum Ore Mining Sci. techn. Mag. 3(2010), 71–76 (in Polish).