Experimental investigation on cutting forces, specific cutting pressure, co-efficient of friction and shear energy in turning of HSLA steel

• Autorzy: Singaravel B. , Selvaraj T.

Identyfikatory

DOI

10.1515/mper-2016-0008

• Języki publikacji: EN

Abstrakty

EN

Machinability study of a material is used to find the ease and difficulty during machining operation. High Strength Low Alloy (HSLA) medium carbon steel (EN25 steel) is considered to possess better mechanical properties than carbon steel. In this work, an attempt is made to experimentally investigate and realize the machinability of EN25 steel during turning with coated carbide tools. The effects of machining parameters on cutting force components, Specific Cutting Pressure (SCP), co-efficient of friction and shear energy are analysed during the investigation. The results of the investigation revealed that the mentioned machinability characteristics are necessary and essential to evaluate the machinability of HSLA steel effectively.

Słowa kluczowe

EN

turning; HSLA steel; cutting force; SCP; coefficient; friction; shear energy

• Wydawca: Production Engineering Committee of the Polish Academy of Sciences ; Polish Association for Production Management
• Czasopismo: Management and Production Engineering Review
• Rocznik: 2016
• Tom: Vol. 7, No. 1
• Strony: 71--76
• Opis fizyczny: Bibliogr. 20 poz., tab., wykr., zdj.

Twórcy

autor

Singaravel B.

• Production Engineering Department, National Institute of Technology, Tiruchirappalii, Tamilnadu, India

autor

Selvaraj T.

• Production Engineering Department, National Institute of Technology, Tiruchirappalii, Tamilnadu, India

Bibliografia

• [1] Ernst H., Merchant M.E., Chip formation, friction and high quality machined surfaces, Trans. ASME, 29, 299-328, 1941.
• [2] El Hakim M.A., Shalaby M.A., Veldhuis S.C., Dosbaeva G.K., Effect of secondary hardening on cutting forces, cutting temperature, and tool wear in hard turning of high alloy tool steels, Measurement, 65, 233-238, 2015.
• [3] Selvaraj D.P., Chandramohan P., Mohanraj M., Optimization of surface roughness, cutting force and tool wear of nitrogen alloyed duplex stainless steel in a dry turning process using Taguchi method, Measurement, 49, 205-21, 2014.
• [4] Lawal S.A., Choudhury I.A., Nukman Y., Experimental Evaluation and Optimization of Flank Wear During Turning of AISI 4340 Steel with Coated Carbide Inserts Using Different Cutting Fluids, Journal of IEI (India): Series C., 96, 21-28, 2015.
• [5] Mandal N., Doloi B., Mondal B., Force prediction model of Zirconia Toughened Alumina (ZTA) inserts in hard turning of AISI 4340 steel using response surface methodology, Int. J. Precis. Eng. Manuf., 13, 1589-1599, 2012.
• [6] Suresh R., Basavarajappa S., Samuel G.L., Some studies on hard turning of AISI 4340 steel using multilayer coated carbide tool, Measurement, 45, 1872-1884, 2012.
• [7] Devillez A., Le Coz G., Dominiak S., Dudzinski D., Dry machining of Inconel 718, workpiece surface integrity, J. Mater. Process. Tech., 211, 1590-1598, 2011.
• [8] Thakur D.G., Ramamoorthy B., Vijayaraghavan L., Machinability investigation of Inconel 718 in highspeed turning, Int. J. Adv. Manuf. Technol., 45, 421- 429, 2009.
• [9] Sharma V.S., Dhiman S., Sehgal R., Sharma S.K., Estimation of cutting forces and surface roughness for hard turning using neural networks, J. Intell. Manuf., 19, 473-483, 2008.
• [10] Thakur D.G., Ramamoorthy B., Vijayaraghavan L., Study on the machinability characteristics of superalloy Inconel 718 during high speed turning, Mater. & Des., 30, 1718-1725, 2009.
• [11] Sreejith P.S., Krishnamurthy R., Malhotra S.K., Effect of specific cutting pressure and temperature during machining of carbon/phenolic ablative composite using PCBN tools, J. Mater. Process. Tech., 183, 88-95, 2007.
• [12] Davim J.P., Figueira L. Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools using statistical techniques, Mater. & Des., 28, 1186-1191, 2007.
• [13] Davim J.P. Diamond tool performance in machining metal-matrix composites, J. Mater. Process. Tech., 128, 100-105, 2002.
• [14] Davim J.P., Mata F. A new machinability index in turning fiber reinforced plastics, J. Mater. Process. Tech., 170, 436-440, 2005.
• [15] Davim J.P., Mata F., New machinability study of glass fibre reinforced plastics using polycrystalline diamond and cemented carbide (K15) tools, Mater. & Des., 28, 1050-1054, 2007.
• [16] Çakır O., Kıyak M., Altan E., Comparison of gases applications to wet and dry cuttings in turning, J. Mater. Process. Tech., 153, 35-41, 2004.
• [17] Duflou JR., Kellens K., Guo Y., Dewulf W., Critical comparison of methods to determine the energy input for discrete manufacturing processes, CIRP Ann-manuf Techn., 61, 63-66, 2012.
• [18] Pawade R.S., Sonawane H.A., Joshi S.S., An analytical model to predict specific shear energy in highspeed turning of Inconel 718, Int. J. Mach. Tool. Manu., 49, 979-990, 2009.
• [19] Babu P.D., Buvanashekaran G., Balasubramanian K.R., Experimental investigation of laser transformation hardening of low alloy steel using response surface methodology, Int. J. Adv. Manuf. Technol., 67, 1883-1897, 2013.
• [20] Gupta M., Kumar S., Investigation of surface roughness and MRR for turning of UD-GFRP using PCA and Taguchi method, Jestech., 1, 70-81, 2015.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.