Problems relating to high-pressure gear micropumps

• Autorzy: Kollek W. , Osiński P. , Stosiak M. , Wilczyński A. , Cichoń P.

Identyfikatory

DOI

10.1016/j.acme.2013.03.005

• Języki publikacji: EN

Abstrakty

EN

This paper presents the current development trend in high-pressure hydraulic micropumps. A survey of typical micropumps is carried out. Micropumps designed in-house, with a delivery of 0.8 cm3/rev. and 1 cm3/rev., are presented. A special test rig was designed and built for determining the characteristics of pumps. Some of the test results are reported. They indicate the necessity for further research in this area, particularly into the encountered efficiency problems.

Słowa kluczowe

EN

microhydraulics; micropump; efficiency; tests

PL

mikrohydraulika; mikropompa; wydajność; testy

• Wydawca: Springer ; Wrocław University of Science and Technology
• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2014
• Tom: Vol. 14, no. 1
• Strony: 88--95
• Opis fizyczny: Bibliogr. 12 poz., rys., tab., wykr.

Twórcy

autor

Kollek W.

• Wrocław University of Technology, Faculty of Mechanical Engineering, 50-371 Wrocław, Poland

autor

Osiński P.

• Wrocław University of Technology, Faculty of Mechanical Engineering, 50-371 Wrocław, Poland

autor

Stosiak M.

• Wrocław University of Technology, Faculty of Mechanical Engineering, 50-371 Wrocław, Poland

autor

Wilczyński A.

• Wrocław University of Technology, Faculty of Mechanical Engineering, 50-371 Wrocław, Poland

autor

Cichoń P.

• UTC Aerospace Systems, 51-317 Wrocław, Poland

Bibliografia

• [1] R. Dindorf, P. Łaski, J. Wołkow, Driveand fluid microelement control engineering (in Polish), in: Proceedings of the 10th Conference CYLINDER 2000. The Study, Design, Manufacturing and Operation of Hydraulic Systems, 09.2000, Szczyrk, pp. 49–54.
• [2] R. Dindorf, J. Wołkow, Microhydraulics, Hydraulics and Pneumatics (in Polish), Issue 6/99, 1999, pp. 16–19.
• [3] R. Dindorf, J. Wołkow, Microhydraulic sin automotive vehicles (in Polish), Portfolio of Motorization Scientific Problems Committee, vol. 20, 2000, ISBN: 83-910107-4-0.
• [4] User's Manual for Sensor AT Meter and Torquemeter Type MT-5, MT-10, MT-20, MT-50, MT-100, MT-200, MT-500, MT- 1000 (in Polish).
• [5] A.S. Jihostroj, Aerotechnology & Hydraulics Catalogue.
• [6] Marzocchi Pompe Catalogue: Micropompe and Ingranaggi, Gear micropumps 0.25-0.5, September 2006.
• [7] Sauer Danfoss catalogue: general gear pumps and gear motors, Technical Information, January 2008.
• [8] W. Kollek, Fundamental sof design, modeling and operation of microhydraulic elements and systems (in Polish), Wrocław University of Technology Publishing House, Wrocław, 2011.
• [9] M. Byung-Phil, S. Mi-Young, J. Ho-Seung, K. Chul-Ju, Fabrication of a no-leakage micro-valve with a free- floating structure foradrug-delivery system, Journal of the Korean Physical Society 43 (5) (2003) 930–934.
• [10] F. Wilczyński, M. Zawiślak, Analysis of technical parameters of valve PN16 (in Polish), in: Proceedings of Hydraulic and Pneumatic Drives and Controls Conference 2009: Domestic Sector in Turbulent Market Conditions, International Science & Technology Conference, Wrocław, 7– 9 October 2009, Wrocław SIMP Personel Training Centre, pp. 354–359.
• [11] T. Tabaczek, M. Zawiślak, A. Zieliński, Computations of flow with cavitation in centrifugal pump (in Polish), Systems: Journal of Transdisciplinary Systems Science 16 (2) (2012) 385–394.
• [12] W. Kollek, P. Osiński, Modelling and Design of Gear Pumps, Wrocław University of Technology Publishing House, Wrocław, 2009.