PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Awareness of the prevention through design (PtD) concept among design engineers in the Philippines

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The “Prevention through Design” (PtD) concept considers construction safety during the design process. Several countries are currently practising PtD, including the UK, Singapore, Malaysia, Australia, and the USA, which is still not the case in the Philippines. The study presented in this paper aimed to indicate the current level of awareness of the PtD concept among the structural engineers and purposed to generate a basis of initiatives to introduce or improve the understanding and adoption of PtD in the Philippines. A knowledge, attitude, and practice (KAP) questionnaire was distributed to survey respondents selected through a snowball sampling method, consisting of structural engineers currently working in the Philippines. Sixty-one (61) structural engineers responded and were analysed in this study. Results indicated that PtD was relatively a new concept for most structural engineers in the Philippines. Similarly, the designers’ knowledge of the concept was still low. However, structural engineers viewed PtD as necessary and its implementation as essential in the construction industry. Despite the known concerns in the PtD implementation, structural engineers favoured the adoption of the concept. The paper also discussed challenges and key drivers for implementing PtD in the Philippines based on the questionnaire results and supporting literature reviews. The findings and methodology presented in this paper could serve as a baseline for a larger sample size covering other design trades, such as architectural, electrical, and mechanical design services leading to the broader adoption of PtD in the Philippines. Furthermore, the framework of this study could also apply to other countries with similar contexts.
Rocznik
Strony
78--92
Opis fizyczny
Bibliogr. 72 poz., tab., wykr.
Twórcy
  • Sirindhorn International Institute of Technology, Thammasat University, Thailand
  • Hokkaido University, Japan
  • Sirindhorn International Institute of Technology, Thammasat University, Thailand
  • Hokkaido University, Japan
Bibliografia
  • Behm, M. (2012). Safe design suggestions for vegetated roofs. Journal of Construction Engineering and Management, 138(8), 999-1003. doi: 10.1061/(ASCE)CO.1943-7862.0000500
  • Behm, M., Culvenor, J., & Dixon, G. (2014). Development of safe design thinking among engineering students. Safety Science, 63, 1-7. doi: 10.1016/j.ssci.2013.10.018
  • Behm, M. (2005). Linking construction fatalities to the design for construction safety concept. Safety Science, 43(8), 589-611. doi: 10.1016/j.ssci.2005.04.002
  • Bhagwat, K., Kumar, P., & Delhi, V. S. K. (2021). Usability of visualization platform-based safety training and assessment modules for engineering students and construction professionals. Journal of Civil Engineering Education, 147(2). doi: 10.1061/(ASCE)EI.2643- 9115.0000034
  • Bharadwaj, S., & Deka, S. (2021). Behavioural intention towards investment in cryptocurrency: an integration of Rogers’ diffusion of innovation theory and the technology acceptance model. Forum Scientiae Oeconomia, 9(4), 137-159. doi: 10.23762/FSO_VOL9_ NO4_7
  • Bloch, T., & Sacks, R. (2020). Clustering Information Types for Semantic Enrichment of Building Information Models to Support Automated Code Compliance Checking. Journal of Computing in Civil Engineering, 34(6). doi: 10.1061/(ASCE)CP.1943-5487.0000922
  • Bryman, A. (2016). Social research methods. Oxford University Press.
  • Che Ibrahim, C. K. I., & Belayutham, S. (2020). A knowledge, attitude and practices (KAP) study on prevention through design: a dynamic insight into civil and structural engineers in Malaysia. Architectural Engineering and Design Management, 16(2), 131-149. doi: 10.1080/17452007.2019.1628001
  • Dalati, S., & Gómez, J. M. (2018). Surveys and Questionnaires. In Modernizing the Academic Teaching and Research Environment (pp. 175-186). Springer.
  • Demeterio, R. A. M., Ancheta Jr, R. A., Ocampo, L. A., Capuyan, D. L., & Capuno, R. G. (2019). An investigation on the intralocality differences in health and safety implementation of construction industries. Recoletos Multidisciplinary Research Journal, 7(1), 13-25.
  • Driscoll, T. R., Harrison, J. E., Bradley, C., & Newson, R. S. (2008). The Role of Design Issues in Work-Related Fatal Injury in Australia. Journal of Safety Research, 39(2), 209-214. doi: 10.1016/j.jsr.2008.02.024
  • Evelyn, T. A. L., Ofori, G., Tjandra, I. K., & Kim, H. (2014). The potential of BIM for safety and productivity. Achieving Sustainable Construction Health and Safety.
  • Fargnoli, M., & Lombardi, M. (2020). Building information modelling (BIM) to enhance occupational safety in construction activities: Research trends emerging from one decade of studies. Buildings, 10(6). doi: 10.3390/BUILDINGS10060098
  • Ferrante, P. (2010). The rise of serious injuries and the proportion of aging workers in the workplace. ASSE Professional Development Conference and Exposition 2010.
  • Gambatese, J. A. (1998). Liability in Designing for Construction Worker Safety. Journal of Architectural Engineering, 4(3), 107-112. doi: 10.1061/(ASCE)1076-0431(1998)4:3(107)
  • Gambatese, J. A., Behm, M., & Rajendran, S. (2008). Design’s role in construction accident causality and prevention: Perspectives from an expert panel. Safety Science, 46(4), 675-691. doi: 10.1016/j.ssci.2007.06.010
  • Gambatese, J. A., Gibb, A. G., Brace, C., & Tymvios, N. (2017). Motivation for Prevention through Design: Experiential Perspectives and Practice. Practice Periodical on Structural Design and Construction, 22(4). doi: 10.1061/(ASCE)SC.1943-5576.0000335
  • Gambatese, J. A., Michael Toole, T., & Abowitz, D. A. (2017). Owner perceptions of barriers to prevention through design diffusion. Journal of Construction Engineering and Management, 143(7). doi: 10.1061/ (ASCE)CO.1943-7862.0001296
  • Gambatese, J., Gibb, A., Bust, P., & Behm, M. (2017). Expanding Prevention through Design (PtD) in practice: innovation, change, and a path forward. Journal of Construction Project Management and Innovation, 7(2), 1995-2006.
  • Ganah, A., & John, G. A. (2015). Integrating building information modeling and health and safety for onsite construction. Safety and Health at Work, 6(1), 39-45. doi: 10.1016/j.shaw.2014.10.002
  • Goh, Y. M. Y. M., & Chua, S. (2016). Knowledge, attitude and practices for design for safety: A study on civil & structural engineers. Accident Analysis & Prevention, 93, 260-266. doi: 10.1016/j.aap.2015.09.023
  • Hallowell, M. R., Hardison, D., & Desvignes, M. (2016). Information technology and safety. Construction Innovation, 16(3), 323-347. doi: 10.1108/CI-09-2015-0047
  • Hallowell, M. R. (2012). Safety-knowledge management in American construction organizations. Journal of Management in Engineering, 28(2), 203-211.
  • Harvey, E., Waterson, P., & Dainty, A. (2019). Impact of the ‘contributing factors in construction accidents’ (ConCA) model. In Advances in Intelligent Systems and Computing, 824. doi: 10.1007/978-3-319-96071-5_33
  • Haslam, R. A., Hide, S. A., Gibb, A. G. F., Gyi, D. E., Pavitt, T., Atkinson, S., & Duff, A. R. (2005). Contributing factors in construction accidents. Applied Ergonomics, 36(4 SPEC. IS), 401-415. doi: 10.1016/j.apergo.2004.12.002
  • Hide, S., Atkinson, S., Pavitt, T. C., Haslam, R., Gibb, A. G. F., & Gyi, D. E. (2003). Causal factors in construction accidents. HSE research report.
  • Horberry, T. (2014). Better integration of human factors considerations within safety in design. Theoretical Issues in Ergonomics Science, 15(3), 293-304. doi: 10.1080/1463922X.2012.727108
  • Huang, X., & Hinze, J. (2006). Owner’s role in construction safety. Journal of Construction Engineering and Management, 132(2), 164-173. doi: 10.1061/(ASCE)0733-9364(2006)132:2(164)
  • Jin, R., Zou, P. X. W., Piroozfar, P., Wood, H., Yang, Y., Yan, L., & Han, Y. (2019). A science mapping approach based review of construction safety research. Safety Science, 113, 285-297. doi: 10.1016/j.ssci.2018.12.006
  • Jin, Z., Gambatese, J., Liu, D., & Dharmapalan, V. (2019). Using 4D BIM to assess construction risks during the design phase. Engineering, Construction and Architectural Management, 26(11), 2637-2654. doi: 10.1108/ECAM-09-2018-0379
  • Karakhan, A. A., & Gambatese, J. A. (2017). Safety Innovation and Integration in High-Performance Designs: Benefits, Motivations, and Obstacles. Practice Periodical on Structural Design and Construction, 22(4). doi: 10.1061/(ASCE)SC.1943-5576.0000338
  • Kasirossafar, M., & Shahbodaghlou, F. (2013a). Application of visualization technologies to design for safety concept. Forensic Engineering 2012: Gateway to a Better Tomorrow - Proceedings of the 6th Congress on Forensic Engineering, 370-377. doi: 10.1061/9780784412640.040
  • Kasirossafar, M., & Shahbodaghlou, F. (2013b). Building information modeling or construction safety planning. ICSDEC 2012: Developing the Frontier of Sustainable Design, Engineering, and Construction - Proceedings of the 2012 International Conference on Sustainable Design and Construction, 1017-1024. doi: 10.1061/9780784412688.0120
  • Kim, I., Lee, Y., & Choi, J. (2020). BIM-based hazard recognition and evaluation methodology for automating construction site risk assessment. Applied Sciences (Switzerland), 10(7). doi: 10.3390/app10072335
  • Lee, Y., Kim, I., & Choi, J. (2020). Development of BIM-based risk rating estimation automation and a design-for-safety review system. Applied Sciences (Switzerland), 10(11). doi: 10.3390/app10113902
  • Li, B., Teizer, J., & Schultz, C. (2020). Non-monotonic spatial reasoning for safety analysis in construction. ACM International Conference Proceeding Series. doi: 10.1145/3414080.3414096
  • López-Arquillos, A., Rubio-Romero, J. C., & Martinez-Aires, M. D. (2015). Prevention through Design (PtD). The importance of the concept in Engineering and Architecture university courses. Safety Science, 73, 8-14. doi: 10.1016/j.ssci.2014.11.006
  • Malekitabar, H., Ardeshir, A., Sebt, M. H., & Stouffs, R. (2016). Construction safety risk drivers: A BIM approach. Safety Science, 82, 445-455. doi: 10.1016/j.ssci.2015.11.002
  • Mann III, J. A. (2008). Education Issues in Prevention through Design. Journal of Safety Research, 39(2), 165-170. doi: 10.1016/j.jsr.2008.02.009
  • Manu, P., Poghosyan, A., Mshelia, I. M., Iwo, S. T., Mahamadu, A.-M., & Dziekonski, K. (2019). Design for occupational safety and health of workers in construction in developing countries: a study of architects in Nigeria. International Journal of Occupational Safety and Ergonomics, 25(1), 99-109. doi: 10.1080/10803548.2018.1485992
  • Melzner, J., Zhang, S., Teizer, J., & Bargstädt, H.-J. (2013). A case study on automated safety compliance checking to assist fall protection design and planning in building information models. Construction Management and Economics, 31(6), 661-674. doi: 10.1080/01446193.2013.780662
  • Mering, M. M., Aminudin, E., Chai, C. S., Zakaria, R., Tan, C. S., Lee, Y. Y., & Redzuan, A. A. (2017). Adoption of Building Information Modelling in project planning risk management. IOP Conference Series: Materials Science and Engineering, 271(1). doi: 10.1088/1757-899X/271/1/012043
  • Mesaros, P., Spisakova, M., & Mackova, D. (2019). Analysis of Safety Risks on the Construction Site. IOP Conference Series: Earth and Environmental Science, 222(1). doi: 10.1088/1755-1315/222/1/012012
  • Norman, G. (2010). Likert scales, levels of measurement and the “laws” of statistics. Advances in Health Sciences Education, 15(5), 625-632.
  • Olivencia, E. R., Del Puerto, C. L., Perdomo, J. L., & Gonzalez-Quevedo, A. A. (2017). Developing and assessing a Safety training module to reduce the risk of cave-ins in the construction industry. ASEE Annual Conference and Exposition, Conference Proceedings, 2017-June.
  • Olugboyega, O., & Windapo, A. (2019). Building information modeling—enabled construction safety culture and maturity model: A grounded theory approach. Frontiers in Built Environment, 5. doi: 10.3389/fbuil.2019.00035
  • Organization, W. H. (2008). Advocacy, communication and social mobilization for TB control: a guide to developing knowledge, attitude and practice surveys. World Health Organization.
  • Poghosyan, A., Manu, P., Mahamadu, A.-M., Akinade, O., Mahdjoubi, L., Gibb, A., & Behm, M. (2020). A web-based design for occupational safety and health capability maturity indicator. Safety Science, 122. doi: 10.1016/j.ssci.2019.104516
  • Potoczek, N.R. (2021). The use of process benchmarking in the water industry to introduce changes in the digitization of the company’s value chain. Journal of Entrepreneurship, Management, and Innovation, 17(4), 51-89. doi: 10.7341/2021174
  • Qi, J., Issa, R. R. A., Olbina, S., & Hinze, J. (2014). Use of building information modeling in design to prevent construction worker falls. Journal of Computing in Civil Engineering, 28(5). doi: 10.1061/(ASCE)CP.1943-5487.0000365
  • Rodrigues, F., Antunes, F., & Matos, R. (2020). Safety plugins for risks prevention through design resourcing BIM. Construction Innovation. doi: 10.1108/CI-12-2019-0147
  • Rogers, E. M., Singhal, A., & Quinlan, M. M. (2014). Diffusion of innovations. Routledge.
  • Rubio-Romero, J. C., López-Arquillos, A., Martinez-Aires, M. D., & Carrillo-Castrillo, J. A. (2014). Prevention through design (PTD) concept at university. Engineering & architecture students’ perspective. Occupational Safety and Hygiene II - Selected Extended and Revised Contributions from the International Symposium Occupational Safety and Hygiene, SHO 2014, 53-56.
  • Sousa, V., Almeida, N. M., & Dias, L. A. (2014). Risk-based management of occupational safety and health in the construction industry–Part 1: Background knowledge. Safety Science, 66, 75-86.
  • Sullivan, G. M., & Artino Jr, A. R. (2013). Analyzing and interpreting data from Likert-type scales. Journal of Graduate Medical Education, 5(4), 541.
  • Suraji, A., Duff, A. R., & Peckitt, S. J. (2001). Development of causal model of construction accident causation. Journal of Construction Engineering and Management, 127(4), 337-344.
  • Taiebat, M., Beliveau, Y., Ku, K., & Kovel, J. (2012). Challenging hazard impact factors to turn them into analytical logics. Proceedings, Annual Conference - Canadian Society for Civil Engineering, 1, 128-137.
  • Toole, T. M., & Carpenter, G. (2013). Prevention through design as a path toward social sustainability. Journal of Architectural Engineering, 19(3), 168-173. doi: 10.1061/(ASCE)AE.1943-5568.0000107
  • Toole, T. M., & Erger, K. (2019). Prevention through Design: Promising or Perilous? Journal of Legal Affairs and Dispute Resolution in Engineering and Construction, 11(1). doi: 10.1061/(ASCE)LA.1943-4170.0000284
  • Toole, T. M., & Gambatese, J. (2008). The Trajectories of Prevention through Design in Construction. Journal of Safety Research, 39(2), 225-230. doi: 10.1016/j.jsr.2008.02.026
  • Toole, T. M., & Gambatese, J. (2017). Levels of implementation of prevention through design in the united states. Proceedings of the Joint CIB W099 and TG59 International Safety, Health, and People in Construction Conference, 11-13.
  • Tymvios, N., & Gambatese, J. A. (2019). Benefit/cost model for evaluating prevention through Design (PTD) solutions. Proceedings, Annual Conference - Canadian Society for Civil Engineering, 2019-June.
  • Tymvios, N., Gambatese, J., & Sillars, D. (2012). Designer, contractor, and owner views on the topic of Design for Construction Worker Safety. Construction Research Congress 2012: Construction Challenges in a Flat World, Proceedings of the 2012 Construction Research Congress, 341-355. doi: 10.1061/9780784412329.035
  • Votano, S., & Sunindijo, R. Y. (2014). Client safety roles in small and medium construction projects in Australia. Journal of Construction Engineering and Management, 140(9), 4014045.
  • Weidman, J., Dickerson, D. E., & Koebel, C. T. (2015). Prevention through Design Adoption Readiness Model (PtD ARM): An integrated conceptual model. Work, 52(4), 865-876. doi: 10.3233/WOR-152109
  • Workplace Safety and Health Council. (2011). Health Council. Improving Workplace Safety Health Work, 2, 201r9.
  • Wu, C., Wang, F., Zou, P. X. W., & Fang, D. (2016). How safety leadership works among owners, contractors and subcontractors in construction projects. International Journal of Project Management, 34(5), 789-805. doi: 10.1016/j.ijproman.2016.02.013
  • Yan, F., Hu, Y., Jia, J., Ai, Z., Tang, K., Shi, Z., & Liu, X. (2020). Interactive WebVR visualization for online fire evacuation training. Multimedia Tools and Applications, 79(41-42), 31541-31565. doi: 10.1007/s11042-020-08863-0
  • Zhang, L., Wu, X., Ding, L., Chen, Y., & Skibniewski, M. J. (2013). Risk identification expert system for metro construction based on BIM. ISARC 2013 - 30th International Symposium on Automation and Robotics in Construction and Mining, Held in Conjunction with the 23rd World Mining Congress, 1437-1446. doi: 10.22260/isarc2013/0163
  • Zhang, S., Sulankivi, K., Kiviniemi, M., Romo, I., Eastman, C. M., & Teizer, J. (2015). BIM-based fall hazard identification and prevention in construction safety planning. Safety Science, 72, 31-45. doi: 10.1016/j.ssci.2014.08.001
  • Zhang, S., Teizer, J., Lee, J.-K., Eastman, C. M., & Venugopal, M. (2013). Building Information Modeling (BIM) and Safety: Automatic Safety Checking of Construction Models and Schedules. Automation in Construction, 29, 183-195. doi: 10.1016/j.autcon.2012.05.006
  • Zhou, Z., Goh, Y. M., & Li, Q. (2015). Overview and analysis of safety management studies in the construction industry. Safety Science, 72, 337-350.
Uwagi
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-80105c95-be04-4b2f-a7df-ac4ce8f739be
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.